TXR05 Member 181 Member For: 13y 5m 11d Gender: Male Location: Brisbane QLD Posted 11/04/14 02:16 AM Share Posted 11/04/14 02:16 AM Car: 2005 xr6tTrans: 6 speed manualTurbo: stockBoost: 12 PSIValve springs: Atomic HDInduction: Process west wheel arch CAI Hi-flow K&N pod filterCooler: Process west stage 3.1 Intercooler kitFueling: Walbro in tank pump to 42 pound bosch injectorsExhaust: 4" dump with screamer ( fed back into exhaust ), 5" 100 CPI Hi-flow cat, 3.5 mandrel bent exhaust to a twin tip mufflerPower: 313RWKWTuner: Capagot a 12.6 @ 114MPH at willobank raceway with a AI temp of about 45 - 50 ( no thanks to sitting there for half hour before each run )60' time of 2.1 So not the best of launches. Still happy non the less with my time.Just an update I guess. After randomly losing 80 - 100 RWHP for no apparent reason, had my tune updated to the Xcal 3 and flashed by Real dyno, to pull 402.3hp ( 300RWKW ) on 14 PSI. Only thing they could tell me as to why I lost so much power was there was a fault with my timing and there was non being put into the engine. They don't know why, and neither did Elite Automotive. So at least I still have most of my power back now. Really want 400RWKW, but can't on my BA motor. Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 18y 9m 12d Gender: Male Location: Brisbane Posted 13/04/14 03:31 AM Share Posted 13/04/14 03:31 AM (edited) Yes you can have 400 on a BA motor Edited 13/04/14 03:33 AM by old_mate 1 Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 7m 4d Gender: Male Location: Sydney Posted 13/04/14 04:48 AM Share Posted 13/04/14 04:48 AM Eflex ftw 1 Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 14d Gender: Male Posted 13/04/14 11:50 AM Share Posted 13/04/14 11:50 AM e85 FTW. 1 Link to comment Share on other sites More sharing options...
matt036 Donating Members 280 Member For: 14y 10m 17d Gender: Male Posted 14/04/14 09:53 AM Share Posted 14/04/14 09:53 AM (edited) 415rwkw on ba motor. But e85 is your friend Edited 14/04/14 09:53 AM by matt036 2 Link to comment Share on other sites More sharing options...
mdmatt Member 70 Member For: 10y 9m 4d Gender: Male Location: Perth Posted 16/04/14 01:11 PM Share Posted 16/04/14 01:11 PM Name: MattCar: 2008 G6ETTrans: 6 speed autoPower: 298.9rwkwBoost: 14psiInduction: Herrod CAITurbo: Stock Valve Springs: StockIntercooler: StockExhaust: StockFuel system: ID1000'sSuspension: SSL's front, SSSL's rear, monroe shocksXCAL3 flash tuned & injectors, Herrod CAI, cooler thermostat.Made 252.4 rwkw stock / tuned by Simon @ XFT Link to comment Share on other sites More sharing options...
puck_lindsay New Member 21 Member For: 11y 6m 21d Gender: Male Location: Perth, WA Posted 27/04/14 12:17 PM Share Posted 27/04/14 12:17 PM Name: LindsayCar: FG G6ETTrans: 6 speed autoBoost: 17 psi tapering off to 13psiInduction: Herrod intake w/K&N filter, Nizpro cooler and pipingTurbo: Stock GT3576rValve Springs: AtomicExhaust: Custom 3.5" split dump -> xforce 2x2.5" Fuel system: ID1000's, walbro 400Lph fuel pump, E85Tuner: XFTPower: 360rwkw, 890Nm1/4 mile: 12.002 with massive traction issues. 1 Link to comment Share on other sites More sharing options...
Future Donating Members 116 Member For: 13y 8m 21d Gender: Male Location: Brisbane Posted 23/05/14 02:29 PM Share Posted 23/05/14 02:29 PM Name: JoleCar: BA XR6TTrans: 4 Speed AutoPower: 258.9rwkw with 870nm torqueBoost: 14psi trailing of to 10Induction: Custom Air Box with Pod FilterIntercooler: Stage 3 Process West with hot and cold side pipingTurbo: StockValve Springs: Atomic Heavy DutyExhaust: Venom 3.5" Dump with High flow catFuel Sytem: KPM 1000cc Inectors with 500hp Walbro Fuel PumpXCAL4 flash tuned by Elite Automotive on BP Ultimate 98 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 29d Gender: Male Location: Perth Posted 23/05/14 02:37 PM Share Posted 23/05/14 02:37 PM Did you sort your centre caps out Link to comment Share on other sites More sharing options...
Future Donating Members 116 Member For: 13y 8m 21d Gender: Male Location: Brisbane Posted 24/05/14 03:07 AM Share Posted 24/05/14 03:07 AM No I haven't, need to focus on port and actuator Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now