bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 3m 27d Gender: Male Posted 15/09/12 10:41 AM Share Posted 15/09/12 10:41 AM Clint (profile autosports)... Yeah pushing the boundaries for sure but yes I will be buyin a n/a motor this week to start the build Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 5m 30d Gender: Male Posted 15/09/12 11:49 AM Share Posted 15/09/12 11:49 AM Hi,Name: theoneCar: BA 2003 XR6 TurboTrans: 4 speed auto with trans coolerPower: 308.1rwkwBoost: 10psiInduction: K&N Filter, Hybrid 600x300 intercooler, Process West crossoverTurbo: StockValve Springs: Performance springsExhaust: Standard, centre muffler removedFuel system: Fake 968 injectors (replacing with ID 1000s soon due to slightly rough idle), Aeromotive fuel pumpPower adder: XCal 3, custom tuneComment: Very happy with the car as it is right now, very hard to hold it on the road straight, it had a lot more left in it but for the safety of the gearbox kept the boost at 10psi. I'm very happy with this power at 10psi. Only thing left to do is replace the injectors and if need be in the future put a built BTR gearbox in. Obviously going to have to replace the rear tyres fairly regularly lol...taking it to Eastern Creek when I get some time, hoping for a high 11.CheersHave you ever run your car down the 1/4?That's a lot of power for 10psi and a standard exhaust. 1 Link to comment Share on other sites More sharing options...
TheOne Member 80 Member For: 12y 11m 4d Gender: Male Posted 15/09/12 12:14 PM Share Posted 15/09/12 12:14 PM Have you ever run your car down the 1/4?That's a lot of power for 10psi and a standard exhaust.Hi rbjet,My tuner was even surprised with that power gain with the standard exhaust (the kitty cat's been dropped off the bridge if you know what I mean, but still standard exhaust with centre muffler removed)...haven't run this car down the quarter yet but hoping to get it there in the next fortnight, need to get some new rear tyres first...hoping for 11s because I've seen cars with similar power figures to mine running high 11s. And yeah I know the boost setting is very low on my car, I was very impressed with the power it made on such low boost. Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 5m 30d Gender: Male Posted 15/09/12 12:18 PM Share Posted 15/09/12 12:18 PM Hmmm dead cat might help I guess. If your power is right and you can peddle it then you should crack a high 11. Link to comment Share on other sites More sharing options...
GTEXXED Banned Banned 910 Member For: 12y 4m 2d Gender: Male Posted 15/09/12 12:22 PM Share Posted 15/09/12 12:22 PM (edited) Going to take more power than that from a std 4spd to run an 11 me thinks. Edited 15/09/12 12:23 PM by GTEXXED Link to comment Share on other sites More sharing options...
TheOne Member 80 Member For: 12y 11m 4d Gender: Male Posted 15/09/12 12:42 PM Share Posted 15/09/12 12:42 PM Maybe but will just have to see, be very happy with 12,s to, I'll put up a dyno sheet soon. Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 5m 30d Gender: Male Posted 15/09/12 12:44 PM Share Posted 15/09/12 12:44 PM My 4spd isn't standard but my stall converter is and I ran 118mph. I'm guessing I could crack an 11.9 with that. Link to comment Share on other sites More sharing options...
Cruiser.craig Member 6 Member For: 12y 4m 29d Gender: Male Location: Bunbury W.A Posted 23/09/12 10:20 AM Share Posted 23/09/12 10:20 AM Name: CraigCar: 05 xr6 turboPower:330 rwkwTrans: 6 Speed ManualClutch:4000 ib race clutchBoost: 16 PsiInduction: Under battery intake, 800 hp plazmaman intercoolerTurbo: stockValve Springs: stockExhaust: 4" dump to 3 1/2" with cat and centre muffler removedFuel System: 550 hp rated fuel pump ( not sure what brand), with deko 60 pound injectorsPower Adder: BPT Motorsportso now that everyone knows my mods would I be crazy to upgrade the valve springs, get a plenum and try for 360?? im just hungry for a bit more power but I dont want to be in extreme territory for popping motors... thoughts?? 1 Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 7m 1d Gender: Male Location: Sydney Posted 23/09/12 12:33 PM Share Posted 23/09/12 12:33 PM Go for it Link to comment Share on other sites More sharing options...
perendale express Member 6 Member For: 12y 10m 13d Posted 09/10/12 09:14 AM Share Posted 09/10/12 09:14 AM I was talking to a ford mechanic couple of months back and he claimed that the ba II had the better valve springs in them, he said he was 100% sure. But everyone on here thinks its only falcons made after 06/06 so who knows, mayb he had a bit of brain fade and was thinkin of the bf II Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now