SubJimbo ŠύЂפֿĺmβø ™ Donating Members 1,216 Member For: 16y 11m 10d Gender: Male Location: Melbourne Posted 05/03/09 08:54 PM Share Posted 05/03/09 08:54 PM Not sure if they will or not mate, Honestly never tried before.Just find a friend of even somebody in your area here that has a dremel you can use for a few hours Link to comment Share on other sites More sharing options...
PHANTMXR6 It's not a MKI! Member 1,742 Member For: 16y 5m 22d Gender: Male Location: Earth Posted 06/03/09 03:31 AM Share Posted 06/03/09 03:31 AM All you need is a drill, a trusty old hacksaw blade, some sandpaper and a bit of patience. Link to comment Share on other sites More sharing options...
SLider Member 47 Member For: 15y 11m 23d Gender: Male Location: Perth Posted 07/03/09 01:38 AM Share Posted 07/03/09 01:38 AM Just did this last night and took her for a quick spin and its much better havn't got a K&N yet but not sure if I will, does anyone know if there are any high flow dry air filters available for these cars? something like Apexi or something like that?Cheers for the measurements made things very easy to do and it fitted spot on and even fitting the 3rd bolt was really easy!Cheers,Tim Link to comment Share on other sites More sharing options...
Lak Member 87 Member For: 15y 9m 9d Gender: Male Location: SE Melb Posted 17/03/09 07:52 AM Share Posted 17/03/09 07:52 AM Hey guys, just fit one of these on my car this afternoon. Was great to install and looks very factory. My 0-100 times are around 8secs on petrol and about 8.4secs on LPG. :D I am so happy. Big improvement for me. Hopefully I can get more kms out of a full tank as well. Looking forward to grabbing an underdrive soon! :D:DThanks for all the help with the measurements and advice guys. Really did help so much. Link to comment Share on other sites More sharing options...
BLU333 Member 17 Member For: 16y 1m 12d Posted 08/05/09 06:13 AM Share Posted 08/05/09 06:13 AM Just did this to my T ute made a difference for sure, the link givin above for sizes and cutting is spot on! Definately more flutter. I also have kn filter. Link to comment Share on other sites More sharing options...
dragr32 Member 11 Member For: 16y 8m 27d Posted 09/05/09 01:59 AM Share Posted 09/05/09 01:59 AM I did this mod very easy & can notice a small difference ,then got ss cold air induction for my birthday so theyr both fitted noticeable difference & induction noise Link to comment Share on other sites More sharing options...
XBEYNA Member 6 Member For: 15y 9m 14d Gender: Male Location: Melbourne Posted 19/05/09 12:50 AM Share Posted 19/05/09 12:50 AM done this mod last week. also added a BMC air filter. Noticed alot less turbo lag and better throttle responseIf you dont want to cut the airbox there actuually is a F6 lower airbox that comes pre cut.a worth while mod. Link to comment Share on other sites More sharing options...
jasol Member 571 Member For: 15y 10m 13d Location: adelaide Posted 20/05/09 09:45 AM Share Posted 20/05/09 09:45 AM also I read in a few other posts that the xr8 or gt snorkel worked aswell, wel I got the xr8 one cos any joeblow can get one from ford. it acually doesnt fit up to the box correctly as were it meets the box its curved not flat like a typhoon one I ended up useing some urathane rubber glue to smooth/fill in the cap as there was a cap in the middle at the top and botomit looks ok as I was able to mould the glue by spraying some prepsol on it then smoothing it so I strongly suggest if your going to do this mod make sure you get a typhoon one. they all look the same just the end that clicks into the airbox is differant Link to comment Share on other sites More sharing options...
Driven By Shine Member 15 Member For: 16y 3m 27d Gender: Male Location: Gold Coast Posted 27/06/09 11:12 PM Share Posted 27/06/09 11:12 PM You guys are ledgends. I got a F6 snorkle from Ford and fitted it up in around 30mins.I followed the measurments and they are spot on. Thanks for putting the time in to make this heaps easier for all.I also got a SS Inductions panel filter they have some factory seconds for $50 at the moment if you can get to the factory.Thanks again for the directions.Chris Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 11m 25d Gender: Male Posted 28/06/09 04:28 AM Share Posted 28/06/09 04:28 AM so where is the best place to buy the F6 lower snorkel? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now