senna_T Forged Member Lifetime Members 15,818 Member For: 18y 25d Gender: Male Location: SW Sydney Posted 02/08/07 04:03 AM Share Posted 02/08/07 04:03 AM Hi Guys, just wondering if anyone else had this new pipe that pwr have released, it replaces the charge air return pipe which runs under the battery box after the cooler. I fitted it after I got the bigger cooler and felt an immediate difference on a 8psi tune. Can be tricky to fit, but it is worthwhile if you don't want to change the crossover section.Whats everyone's thoughts? Link to comment Share on other sites More sharing options...
Basketballer_vince Member 136 Member For: 20y 6m 13d Gender: Male Location: Melbourne Posted 02/08/07 04:10 AM Share Posted 02/08/07 04:10 AM (edited) Just wondering how much you paid for it and do you have a part number ? Edited 02/08/07 04:11 AM by Basketballer_vince Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 25d Gender: Male Location: SW Sydney Posted 02/08/07 04:32 AM Author Share Posted 02/08/07 04:32 AM basketballer vince, I think I paid around $240 for it, they have it on their web site www.pwr.com.au Drew Tarrant at PWR is very helpful and their product is of good quality IMHO Link to comment Share on other sites More sharing options...
ritzy Member 119 Member For: 18y 1m 13d Gender: Male Location: Lysterfield, Melbourne Posted 02/08/07 08:36 AM Share Posted 02/08/07 08:36 AM Why wouldn't you just go fro Process west's stage 2 kit.. Link to comment Share on other sites More sharing options...
rhys86 Donating Members 443 Member For: 18y 2m 2d Gender: Male Location: Wollongong Posted 02/08/07 11:37 AM Share Posted 02/08/07 11:37 AM (edited) Why wouldn't you just go fro Process west's stage 2 kit.. The process west kit is alot better option and gives you more options if you want to expand on your setup in the future once the power bug bites. Edited 02/08/07 11:39 AM by rhys86 Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 25d Gender: Male Location: SW Sydney Posted 02/08/07 11:06 PM Author Share Posted 02/08/07 11:06 PM The process west kit is alot better option and gives you more options if you want to expand on your setup in the future once the power bug bites.Unfortunately I didn't know about this process west kit, as I've only been on the forums for a little while! So far, from what I've seen, this set up will be more than enough for my needs. Also, the PWR gear fits in the same spot as factory gear, so you can keep a relatively stock looking engine bay if that's what you're after!( p.s. I don't work for PWR! ) Link to comment Share on other sites More sharing options...
2fardown Member 526 Member For: 19y 9m 20d Gender: Male Location: Brisbane Posted 02/08/07 11:20 PM Share Posted 02/08/07 11:20 PM The process west kit is alot better option and gives you more options if you want to expand on your setup in the future once the power bug bites.Depends on how far he wants to go. I'm running 11's with just a wog cooler setup. Anymore power and I have to think about rods. Experimenting for yourself is the best part about modifying, not being a sheep and going for the latest and greatest. Link to comment Share on other sites More sharing options...
ritzy Member 119 Member For: 18y 1m 13d Gender: Male Location: Lysterfield, Melbourne Posted 03/08/07 01:46 AM Share Posted 03/08/07 01:46 AM (edited) Experimenting for yourself is the best part about modifying, not being a sheep and going for the latest and greatest.Experimenting can be expensive though. Nothing worse than buying something only to find you need something better or bigger later. Thanks for an other option though senna_T... Edited 03/08/07 01:47 AM by ritzy Link to comment Share on other sites More sharing options...
BAman Member 133 Member For: 18y 4m 26d Gender: Male Location: sydney Posted 03/08/07 05:04 AM Share Posted 03/08/07 05:04 AM Hi Guys, just wondering if anyone else had this new pipe that pwr have released, it replaces the charge air return pipe which runs under the battery box after the cooler. I fitted it after I got the bigger cooler and felt an immediate difference on a 8psi tune. Can be tricky to fit, but it is worthwhile if you don't want to change the crossover section.Whats everyone's thoughts?I think you have made a wise choice going with PWR.Does the new pipe hook onto the existing pipes?Have you got a photo of your front end? Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 6m 11d Gender: Male Location: Melbourne, VIC Posted 03/08/07 07:09 AM Share Posted 03/08/07 07:09 AM Does it connect to the standard cooler or do u have an aftermarket cooler. I think its a great option if not chasing big power.Otherwise a PW Stage 2 is the answer I reckon. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now