MUZ580 Member 448 Member For: 18y 8m 15d Gender: Male Location: Manly - Sydney Posted 31/07/07 11:37 PM Share Posted 31/07/07 11:37 PM Just wanted to post pictures of my new mods which include a Process West Cooler and intake with K&N and some 3 inch piping from the cooler to the throttle body.The pipework includes a 25mm outlet for the turbosmart kompact BOV which I have plumbed up so it vents 100% Atmo (which is also for sale) and the hose for the MAP/boost sensor. I wasn't sure what part I had to cut out for the intake and we ended up cutting out way too much and butchering it a fair bit. Lucky it is I hidden by the front bar! It was also a bit tricky to get the right fit under the battery tray and we had to "persuade" it a little with some multi-grips so it would fit. The end result is a jump of over 50rwkw from 280 to 330 with the tune from C&V. The car feels really strong now and will turn the tyres right through to 3rd gear. Have to say thanks to Kevin at Process West, Dalsey - cole trickle for the advice, Chris - RAP1D for the pipework and my brother Mathew for the help with the install. I give the T5 box till tonight at WSID to blow, if not it will happen very shortly and a new T56 will go in. Link to comment Share on other sites More sharing options...
SCRIBR Yaris member Member 4,486 Member For: 18y 5m 23d Gender: Male Posted 01/08/07 12:38 AM Share Posted 01/08/07 12:38 AM that's awesome!hows the sound/throttle respones?did you get the additional pipework from RAP1D because you cannot get the pipwork from the stage2 kit to the throttle body? (that little section) Link to comment Share on other sites More sharing options...
MUZ580 Member 448 Member For: 18y 8m 15d Gender: Male Location: Manly - Sydney Posted 01/08/07 01:15 AM Author Share Posted 01/08/07 01:15 AM The induction sound is almost too loud, I scared a guy on a push bike the other night when I cruised past him! The turbo flutter when the BOV wasn't connected was so loud it was annoying. I guess if you like that stuff it would sound pretty cool. Throttle response is improved but not to the point I would brag about it, more the power through the entire rev-range. Yep RAP1D did all the pipework from the cooler to the TB. 3inch with outlets for the MAP sensor and BOV. Even got it polished for a bit of bling. I couldnt wait for Kev to release his section, I'm too impatient and I wanted to remove the whole crossover part of the factory induction set-up at one time. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 16d Gender: Male Location: Canning Vale, W.A Posted 01/08/07 04:05 AM Share Posted 01/08/07 04:05 AM so how much cutting is actually required for the pod filter to fit nicely? I was told there was no cutting at all :s Link to comment Share on other sites More sharing options...
SCRIBR Yaris member Member 4,486 Member For: 18y 5m 23d Gender: Male Posted 01/08/07 05:17 AM Share Posted 01/08/07 05:17 AM doesn't look like no cutting does it Link to comment Share on other sites More sharing options...
mbjunior99 Member 4,359 Member For: 21y 11m 21d Gender: Male Location: Brisbane Posted 01/08/07 05:25 AM Share Posted 01/08/07 05:25 AM Looks very nice Link to comment Share on other sites More sharing options...
MUZ580 Member 448 Member For: 18y 8m 15d Gender: Male Location: Manly - Sydney Posted 01/08/07 05:43 AM Author Share Posted 01/08/07 05:43 AM so how much cutting is actually required for the pod filter to fit nicely? I was told there was no cutting at all :sThere is a bit of cutting, its closer to the wheel you need to cut, not closer to the engine like I did. I just used a pair of tin snips and multi-grips, the metal cuts quite easily. Link to comment Share on other sites More sharing options...
groper Member 611 Member For: 17y 10m 13d Posted 01/08/07 09:39 AM Share Posted 01/08/07 09:39 AM yep from memory I only removed about 20mmx100mm from the bottom lip of that piece of metal, so its not much and it takes about 10sec to do with some tin snips... Link to comment Share on other sites More sharing options...
SCRIBR Yaris member Member 4,486 Member For: 18y 5m 23d Gender: Male Posted 01/08/07 09:41 AM Share Posted 01/08/07 09:41 AM that's some rapid snipping! Link to comment Share on other sites More sharing options...
Process West Member 248 Member For: 18y 6m 11d Gender: Male Location: Wollongong NSW Posted 01/08/07 09:44 AM Share Posted 01/08/07 09:44 AM There is a bit of cutting, its closer to the wheel you need to cut, not closer to the engine like I did. I just used a pair of tin snips and multi-grips, the metal cuts quite easily.Below is a pic of what needs to be cut for the air intake..(how it shoud look).Kev Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now