Jump to content

Fuel Filter Change Highly Recomended


Recommended Posts

  • Into the laaaake
  • Member
  • Member For: 17y 5m 7d
  • Gender: Male
  • Location: Nrth Qld
Whered everybody get their Filters from...? I cant seem to find them :(

Ive just bought mine from Supercheap, Ryco brand. Some people have said they leak, though mine never have (replaced it 3 times). Some people go for Motorcraft from Fraud.

Link to comment
Share on other sites

  • 2 weeks later...
  • Member
  • Member For: 15y 9m 21d
  • Gender: Male
  • Location: Melbourne

GUYS I BOUGHT THE RYCO FUEL FILTER TODAY AND ALOT OF YOU HAVE HAVING PROBLEMS WITH THEM LEAKING, ITS AN EASY FIX JUST USE SOME TEFLON TAPE ON THE THREADS AND SHE WONT LEAK =], ALOT BETTER THAT FORKING OUT THE EXTRA COIN FOR SOMETHING THAT IS NO BETTER!!!

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 1m 29d
  • Gender: Male
  • Location: Perth

The filters seal on the flare/taper on the end of the pipe and inside the filter.Not the threads I would seriously recommend NOT using teflon tape on any fuel system as petrol turns the teflon tape into mush. If any of this mush on the post fitler side of the fuel system make its way into an injector and blocks or partially blocks it your in for a world of pain...... :biggrin:

Link to comment
Share on other sites

  • 5 months later...
  • I am dissatisfied with my current employment situation
  • Donating Members
  • Member For: 18y 1m 24d
  • Gender: Male

Just finished doing mine now,, took about an hour but the start was being an asshole and the car was only jacked up enough for me to just squeeze under it.. Not too sure if mines been changed or not in the 101,000k's its done,, but when all finished I took it for a drive and felt more responsive and more go go.. dunno if it was just me or it actually made a difference.. I went for the Ryco and has no issues with leaks,, all you need to do is screw it up then push the lines into it and tighten.. took a few pics of the fuel that came out,, was all little black bits in it and the fuel was black..

anyone tell if this is the OG filter?

IMG_0555qq.jpg

Fuel that came out of the filter

IMG_0559qq.jpg

IMG_0565qq.jpg

IMG_0580qq.jpg

and the insides

IMG_0560qq.jpg

IMG_0562qq.jpg

Link to comment
Share on other sites

  • 2 weeks later...
  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 11m 28d
  • Gender: Male
  • Location: Probably above atmospheric pressure

OK that's it, I'm replacing mine with a Ryco from el cheapo super auto! Handy them being open on a Sundee :)

Cheers for the tips lads.

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 16y 11m 28d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Well the nuts were tight AS. Good thing the old man had his special power grip toothed pliers...I'd have rounded the nuts for sure!!

out with the old

Phone006-2.jpg

Backwash from the filter...I hope! hahaha...didn't check the direction when I was pouring it out.

Phone005-1.jpg

In with the new!

Phone008-2.jpg

Car seems to be making the Tuutututu sound now when backing off in 2nd gear WOT at 80-100...maybe I never noticed it before but I've had her a year and only heard that sound once about 4 months ago, now it's consistent. I can't see any reason the fuel delivery would affect this??

Edited by -SteveR-
Link to comment
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'