Guest Guests Posted 23/07/08 06:00 AM Share Posted 23/07/08 06:00 AM Fitted a Valvoline filter last night, started her up & ended up dropping about $15 worth of BP98 on the driveway Going to Cov's this afternoon to pick up a Motorcraft one so hopefully that will work! Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 5m 10d Gender: Male Location: Nrth Qld Posted 23/07/08 08:30 AM Share Posted 23/07/08 08:30 AM I had a Ryco do this once, but I just nipped it up a bit tighter. Double check its tight enough. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 16d Gender: Male Location: OZ Posted 23/07/08 10:00 AM Share Posted 23/07/08 10:00 AM even motorcraft ones will leak if not fully tightened....sometimes they take quite a bit! Link to comment Share on other sites More sharing options...
RIP85 REST IN PEACE V8 Donating Members 469 Member For: 16y 7m 3d Gender: Male Location: Woodridge on the park bench Posted 23/07/08 11:55 PM Share Posted 23/07/08 11:55 PM (edited) I can supply your fuel, OIL and air filters cheaper if interestedZ373 14 +gst fuel filterZ9 5 + gstcan be reached in all states sms diesel 133 767 Edited 23/07/08 11:55 PM by RIP85 Link to comment Share on other sites More sharing options...
Guest Guests Posted 24/07/08 12:34 AM Share Posted 24/07/08 12:34 AM Fitted up the Motorcraft one last night after work & had a little leak. Just loosened the nuts, pushed/twisted the fuel lines in until they felt nice & tight against the inside of the filter then tightened fairly tight... No more leakage Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 5m 1d Gender: Male Posted 24/07/08 01:07 AM Share Posted 24/07/08 01:07 AM that's how I fixed my valvoline one too. just gotta jiggle the lines and filter for a bit, then tighten! Link to comment Share on other sites More sharing options...
driftlover Inactive Members 1 Member For: 16y 3m 13d Posted 13/08/08 01:40 AM Share Posted 13/08/08 01:40 AM hi guys I want to change the fuel filter on my xr6 turbo and I cant find it any where. Does any one know where it is, thanks Link to comment Share on other sites More sharing options...
hanra Into the laaaake Member 1,532 Member For: 17y 5m 10d Gender: Male Location: Nrth Qld Posted 13/08/08 02:43 AM Share Posted 13/08/08 02:43 AM All ya have to do is read mate. hi guys I want to change the fuel filter on my xr6 turbo and I cant find it any where. Does any one know where it is, thanksI'll have to do a bit of research into it to see where it is exactly, to change it on the weekend perhaps.On my ute its basically in line with the passenger door, on the inner side of the chassis rail. Piece of piss to replace.Where is it on the sedan?? I'll do mine as well.Thank ya.nearly the same place, but near the lhs rear passenger door.. just like the utes - it is on the inner part of the rail... you will need 2 spanners to undo it... takes 5 minutes..cheers. Link to comment Share on other sites More sharing options...
DjGsTa Donating Members 944 Member For: 17y 7m 12d Gender: Male Posted 07/10/08 01:15 PM Share Posted 07/10/08 01:15 PM Where can I get a Motorcraft Fuel Filter? Repco, Supercheap and Autobarn only have Ryco..Ford has them for $45 but surely theres somewhere else you can get them from cheaper? Link to comment Share on other sites More sharing options...
Iconic Bionic My engine bay is Bionic Donating Members 3,726 Member For: 18y 8m 5d Gender: Male Location: Freeways Posted 17/11/08 09:51 PM Share Posted 17/11/08 09:51 PM $45 for a fuel filter from Ford?????????What next.I.B. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now