byi Donating Members 159 Member For: 19y 4m 26d Posted 21/06/07 05:01 AM Share Posted 21/06/07 05:01 AM Does anyone know how the F6 boost gauge connects to the vehicles engine bay? I have the full wiring loom set for both gauges and the oil pressure sender however is a sender even required for the boost gauge? or is the wiring loom sufficent?Cheers, Link to comment Share on other sites More sharing options...
ZAP No boost, no bottle, just my foot on the throttle! Lifetime Members 7,935 Member For: 20y 11m 2d Gender: Male Location: Sydney Posted 21/06/07 07:23 AM Share Posted 21/06/07 07:23 AM From the FPV workshop manual it plugs into the Engine Sender HArness for Boost, but there is no mention of the oil pressure.700_06.pdf Link to comment Share on other sites More sharing options...
byi Donating Members 159 Member For: 19y 4m 26d Posted 21/06/07 08:13 AM Author Share Posted 21/06/07 08:13 AM From the FPV workshop manual it plugs into the Engine Sender HArness for Boost, but there is no mention of the oil pressure.Thank you for that attachment. I'm not too concerned about the oil pressure as I have the sender required for that to operate correctly. So your opinion is that the wiring loom once connected to the engine sensor harness is all that is required for the boost gauge to operate?Cheers, Link to comment Share on other sites More sharing options...
falcon Inactive Members 1 Member For: 16y 11m 8d Posted 25/03/08 09:40 AM Share Posted 25/03/08 09:40 AM Thank you for that attachment. I'm not too concerned about the oil pressure as I have the sender required for that to operate correctly. So your opinion is that the wiring loom once connected to the engine sensor harness is all that is required for the boost gauge to operate?Cheers,I have just been reading your quote. I have just bought the fpv gauges, pod and wiring harness but I can only see where the oil pressure plugs into this harness. I only own a ba xr6 turbo mk2 where does the boost signal come from. Link to comment Share on other sites More sharing options...
Mash85 Member 5 Member For: 17y 8m 20d Posted 16/04/08 02:42 PM Share Posted 16/04/08 02:42 PM does anyone have an answer for this? ive got a ba xr6 turbo and am about to install the fpv gauges. do you need to install boost sender aswell or does the car already have this? Link to comment Share on other sites More sharing options...
abs351 New Member 3 Member For: 7y 10m 22d Posted 19/07/20 09:00 AM Share Posted 19/07/20 09:00 AM Hi team, I'm in the same position to locate the boost sensor that will allow factory gauges to work. Anyone have pic? I'm aware of the boost sensor on the intercooler pipe, but I believe this not apart of the gauge wiring system. Thanks Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,140 Member For: 16y 9m 6d Gender: Male Location: Melbourne Posted 19/07/20 09:34 AM Share Posted 19/07/20 09:34 AM There's a sensor on the BA F6 intercooler itself which screws into the side of it. But you really don't want to use the factory gauges as they suck. Link to comment Share on other sites More sharing options...
BigSim New Member 7 Member For: 4y 6m 25d Gender: Male Location: East Burn city Posted 08/11/20 11:48 PM Share Posted 08/11/20 11:48 PM hey boys I have just got the fpv f6 boost and oil gauges but im looking for a part number for the correct wiring loom can any one plzz assist thanks in advance guy. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,140 Member For: 16y 9m 6d Gender: Male Location: Melbourne Posted 08/11/20 11:52 PM Share Posted 08/11/20 11:52 PM it comes as a whole thing, so no, you can't just get the loom... and you need an FPV VIN to get the gauges and pod and loom from ford... but long story short, it's much easier/cheaper to run your own aftermarket pod/wiring/gauges and to top it all off they'll all be accurate. Link to comment Share on other sites More sharing options...
BigSim New Member 7 Member For: 4y 6m 25d Gender: Male Location: East Burn city Posted 08/11/20 11:58 PM Share Posted 08/11/20 11:58 PM well looks like I F*ck up there then lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now