spanner Member 9 Member For: 19y 3m 23d Posted 21/06/07 09:07 AM Share Posted 21/06/07 09:07 AM 6spd manual stock clutch capa flash 247 rwkw 570 nm torque 40k no clutch problems its all about respect Link to comment Share on other sites More sharing options...
Meggs_83 Member 114 Member For: 17y 7m 7d Gender: Male Location: Esperance Posted 21/06/07 09:28 AM Author Share Posted 21/06/07 09:28 AM Well cost is round $11k so I'll be on the look out for some second hand gear, flywheel to gearbox including sump. been told gearbox could need replacing as input shaft took a hit bad. 2 huge holes in chassis from flying debris bout the size of 50cent pieces. exhaust took a hit just before cat (quote was nearly a grand) said I'll chase up my own parts thank you Link to comment Share on other sites More sharing options...
senna Donating Members 32 Member For: 18y 7m 19d Posted 26/06/07 10:57 AM Share Posted 26/06/07 10:57 AM The clutch in my 6 speed BF was slipping. Capa flash, generic 8psi tune had me running 235rwkw. Never raced, never to the strip, never riding, rarely launched it quickly but she started slipping. Just ordered a mal wood option 3, had planned on further mods, so was expecting this eventually, but not after 30000km with a flash only. Clutch is the fuse in the driveline, just hope the rest of it stands up once I start chasing some serious power. F$%king ford dealer, quoted me $600 for labour to install a clutch. I got quoted Less than $250 by 2 other workshops, but ford already had the car with the gearbox on the floor (I was hoping the clutch slipping might be due to something I could warranty) and were going to charge me $400 to put it back together so I could get it done elsewhere. I lost it! The guy said the best they could do was $420. I said ok, but rest assured, they won't see me again. Bastards. Link to comment Share on other sites More sharing options...
6speedXR8 Mal Wood Automotive Member 537 Member For: 21y 7m 21d Location: WARWICK QLD Posted 26/06/07 11:15 AM Share Posted 26/06/07 11:15 AM The clutch in my 6 speed BF was slipping. Capa flash, generic 8psi tune had me running 235rwkw. Never raced, never to the strip, never riding, rarely launched it quickly but she started slipping. Just ordered a mal wood option 3, had planned on further mods, so was expecting this eventually, but not after 30000km with a flash only. Clutch is the fuse in the driveline, just hope the rest of it stands up once I start chasing some serious power. F$%king ford dealer, quoted me $600 for labour to install a clutch. I got quoted Less than $250 by 2 other workshops, but ford already had the car with the gearbox on the floor (I was hoping the clutch slipping might be due to something I could warranty) and were going to charge me $400 to put it back together so I could get it done elsewhere. I lost it! The guy said the best they could do was $420. I said ok, but rest assured, they won't see me again. Bastards.The main problem with the price of repairs is INEXPERIANCE, most of the techs in the dealerships need a bomb up their rear! We charge $220 to $250 to fit on of our clutch kits and it takes no more than 3 hours to fit a Flywheel and Clutch to the BA/BF V8 or 6. If Ben and Myself get serious we can fit one in an Hour between us. Mal Link to comment Share on other sites More sharing options...
XR06T Silver Donating Members 4,146 Member For: 19y 4m 16d Gender: Male Posted 27/06/07 12:48 AM Share Posted 27/06/07 12:48 AM mal, what is your take on the original posters failure? do you think it was driver inflicted or do you think that the clutch would most likely have had a problem before this happened?cheers Link to comment Share on other sites More sharing options...
murrayallstar Member 71 Member For: 19y 2m 17d Posted 29/06/07 11:00 AM Share Posted 29/06/07 11:00 AM The Exact Same thing happened in my mates BA II XR6 Turbo 6 Speed.He has 30 ford company cars and they still wouldnt come to the party. He ended up paying the repair bill but it no where near the same. Has been back to ford 3 times with issues since the repair Link to comment Share on other sites More sharing options...
Meggs_83 Member 114 Member For: 17y 7m 7d Gender: Male Location: Esperance Posted 29/06/07 11:11 AM Author Share Posted 29/06/07 11:11 AM mal, what is your take on the original posters failure? do you think it was driver inflicted or do you think that the clutch would most likely have had a problem before this happened?cheers3rd gear sideways possibly quite close to limiter. chasing Mal up for option 3 and a garage other than ford. but living in esperance it's hard because there's not alot of cars modified in town, always done elsewhere. wish I had a hoist Link to comment Share on other sites More sharing options...
-MOKSTA- Member 59 Member For: 17y 5m 17d Gender: Male Location: Perth, WA Posted 29/06/07 11:47 AM Share Posted 29/06/07 11:47 AM mate sorry to hear it. that looks real nasty!my MK1 T5 did something similar at 80k, melted thrust bearing and totally rooted pressure plate, clutch and flywheel. I bought mine 2nd hand so the dude before me musta left a fair bita rubber layin around. im kinda glad it happend though coz now I know that part of my car is brand new. nothing like a clean start wif some new parts. I sware that the longer I own this thing, the newer it gets! anyways goodluck with it mate. Link to comment Share on other sites More sharing options...
senna Donating Members 32 Member For: 18y 7m 19d Posted 01/07/07 10:03 PM Share Posted 01/07/07 10:03 PM Mal wood option 3 installed, drives beautifully. Highly recommend it, especially considering ford want about the same money for the standard unit. Link to comment Share on other sites More sharing options...
Meggs_83 Member 114 Member For: 17y 7m 7d Gender: Male Location: Esperance Posted 15/07/07 12:23 PM Author Share Posted 15/07/07 12:23 PM Well guys got the quote in...Tranny Ass.-$5976Slave Cyl.-$522Clutch PP-$635Clutch Discs-$434Flywheel-$980That's just the start, there's another $1500 odd including $935 for cat ass. plus over $1000 for labour. Hello Mal Wood and xforce me thinks......a very expensive lesson! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now