Bruce Lee Member 15 Member For: 17y 10m 3d Gender: Male Posted 27/05/07 12:30 PM Share Posted 27/05/07 12:30 PM Hi I have a BFII XR6 Turbo Ute & I was wondering what quartermile times I could get with the power it produces.Vehicle DetailsIt weighs around 1820 due to hard cover, 18s & system.the 18's have 445 tyres on themSix speed Manual450x300x75 Monza M Spec Intercooler.SS Inducton & Typhoon lowerair box.K&N Pod Filter covered by original air box.Capa Flash tune - direct from CapaUte pulled 270rwkw but was running dangerously lean due to universal tune in flasherThese Mods are due to be done in a couple of days.450cc Injectors550hp Walbro Fuel PumpCustom TuneWas told to expect around 330rwkwI know the times would depend on alot of different little things, im just after an idea of what the ute can do.Thanks in advance! Link to comment Share on other sites More sharing options...
XRDOSE BIGRED Donating Members 1,410 Member For: 17y 10m 15d Gender: Male Location: Sth East Melb Posted 27/05/07 12:41 PM Share Posted 27/05/07 12:41 PM is it auto or manual? Link to comment Share on other sites More sharing options...
Guest Guests Posted 27/05/07 12:45 PM Share Posted 27/05/07 12:45 PM To give you an idea, I have just over 300rwkw with 6 speed manual sedan and 245/35/19 street tyres. My best time is 12.8 @110mph but that was with only a 2.1 sec 60 footer.As you've got a ute, you can put slicks on and launch it hard without worrying about smashing a cv. So if you can get a low 60 foot time and get through the gears quickly I'd say maybe a low to mid 12.Good luck Link to comment Share on other sites More sharing options...
Bruce Lee Member 15 Member For: 17y 10m 3d Gender: Male Posted 27/05/07 01:18 PM Author Share Posted 27/05/07 01:18 PM is it auto or manual?Sorry 6 speed ManualTo give you an idea, I have just over 300rwkw with 6 speed manual sedan and 245/35/19 street tyres. My best time is 12.8 @110mph but that was with only a 2.1 sec 60 footer.As you've got a ute, you can put slicks on and launch it hard without worrying about smashing a cv. So if you can get a low 60 foot time and get through the gears quickly I'd say maybe a low to mid 12.Good luck Thanks for your helpAlso im new to the forums, could you please expalin what cv means? sorry Link to comment Share on other sites More sharing options...
koppers Member 119 Member For: 18y 1m 22d Posted 27/05/07 01:37 PM Share Posted 27/05/07 01:37 PM (edited) I'd be expecting a mid 12, for example the ute ran 12.6 @ 114 with 2.01 60ft first night out at the drags with this car.Bf Zf ute with just over 300 rwkw.Run done in full street trim with 18's, a full tank of 98, hard lid, tow bar etc Edited 27/05/07 01:38 PM by koppers Link to comment Share on other sites More sharing options...
dalts Member 755 Member For: 18y 8m 12d Gender: Male Location: brisbane Posted 28/05/07 07:51 AM Share Posted 28/05/07 07:51 AM I'd be expecting a mid 12, for example the ute ran 12.6 @ 114 with 2.01 60ft first night out at the drags with this car.Bf Zf ute with just over 300 rwkw.Run done in full street trim with 18's, a full tank of 98, hard lid, tow bar etcmanuals are alot harder to get down the strip,req alot of practice,depending on your driving abilityyou should expect high 12,s to mid to low 13,scheers lee Link to comment Share on other sites More sharing options...
jetute Donating Members 4,553 Member For: 21y 6d Gender: Male Location: brisbane Posted 28/05/07 08:27 AM Share Posted 28/05/07 08:27 AM mid to low 12... if you run 13's with 330 rwkw then you need some serious driving practice....I recogn a mid 12... and a very low 12 or a flat 12 when you perfect your driving!!!!!!most of all have fun!! Link to comment Share on other sites More sharing options...
BCNYA Member 85 Member For: 17y 10m 16d Gender: Male Location: Newcastle Posted 29/05/07 07:11 AM Share Posted 29/05/07 07:11 AM Sorry 6 speed ManualThanks for your helpAlso im new to the forums, could you please expalin what cv means? sorryI think by CV he means drive shaft. The ting that goes into the centre of the diff and drives the wheels. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 10m 11d Gender: Male Location: Canning Vale, W.A Posted 29/05/07 07:16 AM Share Posted 29/05/07 07:16 AM 12.8-13.1 Link to comment Share on other sites More sharing options...
Guest Guests Posted 29/05/07 07:33 AM Share Posted 29/05/07 07:33 AM What state are you in? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now