Beeks Donating Members 26 Member For: 17y 11m 5d Gender: Male Location: Charters Towers Posted 20/05/07 03:34 AM Share Posted 20/05/07 03:34 AM Ive had my XR6t for 2 weeks now and the airbag light came on and it flashed code 23 (Flashes twice then pause then three times). I rang ford and they insisted on me to bringit in and get it checked out. So I took it in and it cost me $100 for them to just clear the error codes. They claim they could not find the problem. Any who it was off......for about 8 hours. Its back on with code 23 again. So does anyone know what code 23 means? If its any help its an 03 BA XR6 Turbo.Thanks in advance Link to comment Share on other sites More sharing options...
NATHOON Donating Members 197 Member For: 18y 8m 23d Gender: Male Location: Sydney Posted 20/05/07 05:40 AM Share Posted 20/05/07 05:40 AM One of my utes does that too interesting to get to the bottom of this one Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 22y 3m 18d Gender: Male Location: Perth, WA Posted 20/05/07 07:17 AM Share Posted 20/05/07 07:17 AM Mine did this about a year ago, turned out to be a bad crimp connection under the drivers seat.I soldered all the connections, and it has not been seen since Link to comment Share on other sites More sharing options...
f-wolf Member 897 Member For: 17y 11m 16d Gender: Male Location: ACT Posted 20/05/07 07:44 AM Share Posted 20/05/07 07:44 AM I know it's not a Ford XR6T, but just have a look at this :http://autorepair.about.com/library/a/1f/bl847f.htm Link to comment Share on other sites More sharing options...
Laner Former MPS3 Driver! Donating Members 735 Member For: 18y 1m 26d Gender: Male Location: East Ballina NSW Posted 20/05/07 07:48 AM Share Posted 20/05/07 07:48 AM If you decide to have it repaired, you should do it before your next accident.now there's a quote if I've ever seen one Link to comment Share on other sites More sharing options...
f-wolf Member 897 Member For: 17y 11m 16d Gender: Male Location: ACT Posted 20/05/07 08:09 AM Share Posted 20/05/07 08:09 AM Or if you need to slash your wrists, make sure your knife is sharp ! Link to comment Share on other sites More sharing options...
Beeks Donating Members 26 Member For: 17y 11m 5d Gender: Male Location: Charters Towers Posted 20/05/07 08:49 AM Author Share Posted 20/05/07 08:49 AM Yea, sounds like a bad crimp cause it stopped.......for now. Cheers everyone Link to comment Share on other sites More sharing options...
FORDTECH Member 383 Member For: 21y 10m 11d Location: On the edge Posted 21/05/07 10:08 AM Share Posted 21/05/07 10:08 AM Code 23 indicates a short or open circuit in the passenger side side air bag circuit.This code and code 22 appear after either front seat has beem moved after being in the same position for quite some time. Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 11m 16d Gender: Male Location: Victoria Posted 21/05/07 10:17 AM Share Posted 21/05/07 10:17 AM Beeks said: So I took it in and it cost me $100 for them to just clear the error codes.That's a bit steep! Link to comment Share on other sites More sharing options...
stealthxr Donating Members 553 Member For: 19y 2m 4d Gender: Male Location: The Shire Sydney AUS Posted 21/05/07 10:36 AM Share Posted 21/05/07 10:36 AM Check under your passenger seat... There loom which is on the same curcuit as passenger airbag, there is a connector there and it sometimes get knocked during vacuuming.... pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now