gu4800 Member 156 Member For: 18y 29d Location: Brisbane Posted 17/05/07 11:08 AM Share Posted 17/05/07 11:08 AM (edited) I got my car apart and stock cooler off, but it looks like the passengers side of the F6 cooler uses a different bracket than the stock cooler. Anyone fitted one recently?I didn't get the brackets!DanEDIT: SHOULD READ "BF" XR6T - from BF F6 to BF XR6T. Edited 17/05/07 11:12 AM by gu4800 Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/ Share on other sites More sharing options...
MUZ580 Member 448 Member For: 19y 1m 11d Gender: Male Location: Manly - Sydney Posted 17/05/07 12:15 PM Share Posted 17/05/07 12:15 PM Should bolt straight up. I used the F6 brackets with mine, but I"m sure they are the same brackets. Only problem I found was the horn had to be relocated. Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/#findComment-533826 Share on other sites More sharing options...
gu4800 Member 156 Member For: 18y 29d Location: Brisbane Posted 17/05/07 12:42 PM Author Share Posted 17/05/07 12:42 PM Thanks mate, but the bracket is definitely different - a different offset. Anyway, the brackets have been located and I will pick them up later.Now I gotta pull that front bar off again - hate that part!Dan Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/#findComment-533848 Share on other sites More sharing options...
gu4800 Member 156 Member For: 18y 29d Location: Brisbane Posted 19/05/07 10:41 AM Author Share Posted 19/05/07 10:41 AM MUZ580 said: Should bolt straight up. I used the F6 brackets with mine, but I"m sure they are the same brackets. Only problem I found was the horn had to be relocated.Not sure of yours is a BA or BF, but just did mine and cal tell you this:1) MUST have F6 brackets2) NOT a direct fit - have to drill 2 new holes for the passenger side bracket3) HORN does not have to be relocatedOther than that, a very simple job. Oh, and I painted mine black to keep the factory look.Dan Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/#findComment-534557 Share on other sites More sharing options...
BUL11E Member 89 Member For: 19y 9m 18d Gender: Male Location: Sydney Posted 21/05/07 06:32 AM Share Posted 21/05/07 06:32 AM I just put a BF phoon cooler on my BA xr6t on sunday and it was the same brackets, straight fit in and out, mayb the BF xr6t has different brackets Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/#findComment-535191 Share on other sites More sharing options...
MUZ580 Member 448 Member For: 19y 1m 11d Gender: Male Location: Manly - Sydney Posted 21/05/07 07:15 AM Share Posted 21/05/07 07:15 AM Yeah, mines a BA, but I used a BF cooler. Must be that the BF's changed the mounting position on the car? Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/#findComment-535213 Share on other sites More sharing options...
gu4800 Member 156 Member For: 18y 29d Location: Brisbane Posted 21/05/07 09:30 AM Author Share Posted 21/05/07 09:30 AM (edited) MUZ580 said: Yeah, mines a BA, but I used a BF cooler. Must be that the BF's changed the mounting position on the car? BUL11E said: I just put a BF phoon cooler on my BA xr6t on sunday and it was the same brackets, straight fit in and out, mayb the BF xr6t has different bracketsBOTH CORRECT!Just sussed out the BA and BF standard T cooler - they are different. The BA has the passenger mounting brackets off to the side of the tank, whereas on the BF they are on top of the tank. It's not just the brackets - the coolers are different.Look at the two pics below (using PWR as an example):BA - off to the side (look at the right hand side):BF - on top of the tank (again, look at the right hand side):You learn something new every day!Dan Edited 21/05/07 09:32 AM by gu4800 Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/#findComment-535271 Share on other sites More sharing options...
BFHOON Donating Members 1,932 Member For: 19y 1m 16d Gender: Male Location: nsw Posted 21/05/07 11:01 AM Share Posted 21/05/07 11:01 AM when I put my f6 cooler on u turned the bracket upside down and drilled one hole. Link to comment https://www.fordxr6turbo.com/forum/topic/35077-anyone-fitted-and-f6-cooler-into-bf-xr6t/#findComment-535351 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now