Jump to content

Reverse Gear Selection - Manual 6 Speed


dolbs

Recommended Posts

  • BOOST
  • Moderating Team
  • Member For: 21y 2m 14d
  • Gender: Male
  • Location: Southern Highlands NSW

I think that's your clutch saying its not too happy with the xtra power.. My clutch no like me after I did the edit

Link to comment
Share on other sites

  • Replies 24
  • Created
  • Last Reply

Top Posters In This Topic

  • loitering with intent
  • Lifetime Members
  • Member For: 21y 3m 1d
  • Gender: Male
  • Location: Zombie Birdhouse
Jetute had the same thing, was from a 5-speed based edit tune rather than a 6-speed :blink:

Was hilarious at the time watching the poor bastard trying to find the correct tune so he could reverse out of the carpark :roflmbo:

and you reckon I'm an evil bastard :w00t2:

Link to comment
Share on other sites

  • Donating Members
  • Member For: 18y 9m 13d
  • Gender: Male
  • Location: The Shire Sydney AUS

I thinks it might be your reverse lockout solenoid .... possibly 1 setting in the edit, get ure tuner look at it.

or it could be a sticky solenoid.....

Or try pumping the clutch b4 you put it in R, if that makes it easier, ure clutch might be rooted...

Pete :roflmbo:

Edited by stealthxr
Link to comment
Share on other sites

  • Donating Members
  • Member For: 20y 9m 18d
  • Gender: Male
  • Location: brisbane
Jetute had the same thing, was from a 5-speed based edit tune rather than a 6-speed :spoton:

Was hilarious at the time watching the poor bastard trying to find the correct tune so he could reverse out of the carpark :smilielol:

yeah thanks tabitha!!!! am gald some found it funny cause I was farking furious...

anyway tabs right on the money.... the tuner has used a 5 speed manual base tune..... and this farks up reverse and does not open the gate and hence you have to force it trhough.

The tuner needs to use the 6 speed map base code on the side of the ecu and rewrite a new tune... the problem is that they use the generic tunes sent and try to work of these only.... and all the originals were from the 5 speed.... get them to base it of your ecu code and the problem will dissapear!!!!!!!!!!!!!!!! :spoton:

ps... I wouldnt want to be forcing it through the gate too often..... get it fixed immediately as its an electric gate controlled by the ecu!!

Edited by jetute
Link to comment
Share on other sites

  • Sucker
  • Moderating Team
  • Member For: 20y 6m 26d
  • Gender: Male
  • Location: Brisbane
yeah thanks tabitha!!!! am gald some found it funny cause I was farking furious...

I never said I was laughing though

:roflmbo:

Link to comment
Share on other sites

  • Member
  • Member For: 18y 2m 19d
  • Gender: Male
  • Location: Brisbane

Who ever did the tune for you has used the wrong strategy.

The only way to rectify it is do the tune again using the the right strategy.Normaly get this problem with generic tunes.

This is SCT tuning 101.

Cheers Paul

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 19y 4m 28d
  • Gender: Male

im not sure how you do it but mine is wired in so that the gate for reverse only opens when you have your foot on the brake. this is how mal woods recommend you do it, and ninka got mine done in around 10 mins.. may be worth looking into!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'