Loss Of Boost About 4psi

[TornadoJudd]

where do you live in central queensland rednut?

[rednuts81]

Biloela

[Buf-Phoon]

  rednuts81 said:

any one know what the fine is for a gutted cat

Depending on the state I believe it can be up to $10k

[rednuts81]

oh that ill just get a new one I think. some one else was telling me that QLD dose not have one of those exhaust sniffing machines

what cats are u guys running

[Fat-Tony]

  rednuts81 said:

good it was tuned buy power torque all good

Good, doesn't tell me much, can you be more specific as AFR's effect your combustion temps and could be indicitive of you problem.

Adam (not f*cking Tony)

[ZAP]

  rednuts81 said:

Biloela

I have one of my staff going there tomorrow to do some work with a client.

It is a PIA to get to as we are flying to Rocky and then driving down.

That cat looks like it was cooked by bad AFR's....poor pussy

  Fat-Tony said:

Good, doesn't tell me much, can you be more specific as AFR's effect your combustion temps and could be indicitive of you problem.

Adam (not f*cking Tony)

Tony, just accept the fact that you are a fat bastard and that is why you are Fat-Tony.

We do not care what you r real name is.

Or should we change your handle to Fat-Adam

[PSI]

We are the distributor of Metal Cat in Australia and we find it incredible that a person will go and try destroy a products credibility without first contacting the distributor to discuss this in full.

Let us state the facts

-We have distributed thousands of these cats in Australia with neglible failure rates.

-Companies such as TRD, BPMsports, Gonzos Racing Pipes, RDP use these as standard along with hundreds of smaller workshops around Australia.

-No cat is bullet proof regardless as there is are heat limitations to the biscuit.

-A car needs to be correctly tuned and this is quite often where problems occur.

I think people need to keep in persppective that a cat is inert ie it reacts to the conditions it is fed. How can a cat fail at as an example at 300kw , yet the SAME cat is found on the same platform running at 550kw?

The Metal Cat product can be found on every platform in Australis from WRX to V8s as it delivers the goods from a legality and flow perspective.

PSI Products

[tab]

  ZAP_F6 said:

Or should we change your handle to Fat-Adam

No...make it Adam mkII :biggun:

Biloela is a top place, do you know any of the Wilkie's Rednut?

[SAMSXR6T]

sorry about your cat..

[CV PERFORMANCE]

  PSI said:

We are the distributor of Metal Cat in Australia and we find it incredible that a person will go and try destroy a products credibility without first contacting the distributor to discuss this in full.

Let us state the facts

-We have distributed thousands of these cats in Australia with neglible failure rates.

-Companies such as TRD, BPMsports, Gonzos Racing Pipes, RDP use these as standard along with hundreds of smaller workshops around Australia.

-No cat is bullet proof regardless as there is are heat limitations to the biscuit.

-A car needs to be correctly tuned and this is quite often where problems occur.

I think people need to keep in persppective that a cat is inert ie it reacts to the conditions it is fed. How can a cat fail at as an example at 300kw , yet the SAME cat is found on the same platform running at 550kw?

The Metal Cat product can be found on every platform in Australis from WRX to V8s as it delivers the goods from a legality and flow perspective.

PSI Products

I agree and we have had some very good results using this product,where not saying there perfect no product is but they are right up there with the best in there field

CON

CV PERFORMANCE