Siemens Deka 60lb Injectors Group Buy Mkii - Injector Bonanza (26 set's AND CLIMBING......)

[ratter]

[quote name='Orrie' post='540946' date='Jun 5 2007, 08:21 PM']i do not intend to use them for a little while but when they are installed does the tuner need to know any conversion factors to get them spraying correctly ? If so is this info freely available or will you need to supply it ?[/quote]

Capa tuners should have a set of value files they will be able to use for these injectors, but Danny may have a set of fine tuned files that may be better.

[Headsex]

[quote name='ratter' post='541006' date='Jun 5 2007, 10:32 PM']Capa tuners should have a set of value files they will be able to use for these injectors, but Danny may have a set of fine tuned files that may be better.[/quote]

number 1 mistake i made was using the 60lb value file..

would keep stalling, you name it... but i believe that the 60lb value file is designed for american returnless fuel systems, not our 4 bar fuel system.. as it made changes to the fuel presure delta tables.. can you say ewwww?

never the less i would suggest starting with these values.. keep in mind these values SHOULD be on the "rich side" of safe.. (no garentee's given)

(KEEP IN MIND THESE VALUES ARE ONLY FOR 4BAR FUEL PRESURE AS PER XR6T and F6's RUN)

breakpoint 0.0000166
hi slope 0.0195
lo slope 0.0315
min pulse 0.0004

Use with caution, and make sure your tuner adjusts the hi slope appropriately (it should be made larger as these values should be rich), he will find the lo slope can be made larger as the idle will be rich also... Edited 05/06/07 12:55 PM by Headsex

[ENVY-T]

You are a wealth of information! FULL

[markxr6t]

Received my injectors yesterday - Thanks Danny!

[GreenXR6T]

Injectors turned up yesterday, well done and thank you Danny

Rob

[Wright'y]

I received my injectors, thanks again,

cheers

[Bad Apples]

Got mine!! Easy, good to deal with and Cheap!. Couldn't ask for more!

Thanks!

[Headsex]

Guys.. still waiting on some email address's to be PM'd to me before I do all the invoices..

[SCRIBR]

u should know my email addy

[groper]

mine finally turned up today, thanks again danny!