The NUT Member 163 Member For: 18y 7m 19d Location: Townsville Posted 23/04/07 01:46 AM Share Posted 23/04/07 01:46 AM Ha ha love your work Dave Link to comment Share on other sites More sharing options...
TUFXRT6 Silver Donating Members 687 Member For: 18y 8m 8d Gender: Male Location: Victoria Posted 23/04/07 02:18 AM Share Posted 23/04/07 02:18 AM Most cars with BRESCIANI RACING on them run good numbers,Why dont you get on the Full Boost web site to check & see if he has made it into the top times for VIC.I personally have a friend who runs 10's in a VL in street trim but lives in Syd, I havent checked the web site in a couple of months but he was still listed on the SYD top times Link to comment Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 21y 7m 28d Gender: Male Posted 23/04/07 04:51 AM Share Posted 23/04/07 04:51 AM His 255kw figure might be before the serious mods. If he did 10.3 with slicks and 12s with street tyres then this seems right. If I was you I wouldn't be putting any money down. Link to comment Share on other sites More sharing options...
YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 6m 24d Gender: Male Posted 23/04/07 06:02 AM Share Posted 23/04/07 06:02 AM Dont worry mate at the end of the day your driving a T and he is rolling in a $2 turbo And with most VL drivers all there cars run 10 sec's, so who really knows??? Link to comment Share on other sites More sharing options...
loopism Tractor Driver Member 709 Member For: 18y 9m 18d Gender: Male Location: Sydney Posted 23/04/07 06:47 AM Share Posted 23/04/07 06:47 AM Had a look at the Bresciani website, all the cars that they list as running 10s have over 300kW, so I can't see 255 cutting a 10. Link to comment Share on other sites More sharing options...
tquarrell Member 181 Member For: 20y 3m 25d Gender: Male Location: Sydney, NSW Posted 23/04/07 07:18 AM Share Posted 23/04/07 07:18 AM 12's isn't that much of a stretch on street tyres, I recon the T would be lineball or ahead on the street simply due to traction. I've been in a 200rwkw vl and it doesn't hook up anywhere near as well as mine on the street. Live rear axle just doesn't seem to get traction as well as irs.The weight isn't as big a deal as often people think. Say the T is 1700kg's, and a vl is 1300kg's the difference is 400kg's or 24%. So to match the power to weight using the 255rwkw figure, a T would need 315rwkw. Given the 33% greater capacity and 21st century technology (VCT, 24 valve, roller bearing turbo etc) I don't the T should be to intimidated by the vl's (although I totally treat them with respect I have to say). Once the T's are using c16 fuel, stripped out bodies, slicks transbrakes etc etc I have no doubt they will be able to upstage the vl's. The only guys who have changed cams seem to have topped 500rwkw which I guesstimate should be enough for a mid to low nine. Nos should be good on these also (both the intercooling effect and more oxygen in the cylinders). These things are nowhere near their full potential yet, simply because they're newer than the vl's. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 7d Gender: Male Location: Melbourne, VIC Posted 23/04/07 09:47 AM Share Posted 23/04/07 09:47 AM My mate at work had some work done to it by Bresciani... He is now running around 180rwkw.... Its slammed on its arse and it struggles to get traction mind you his wheels arent the best... He took me for a spin and it did go well... Another guy from work just had his fully rebuild and it makes 245rwkw @ 6psi.... its an animal!!! Link to comment Share on other sites More sharing options...
MYWPN Donating Members 554 Member For: 19y 4m 27d Gender: Male Location: Bendigo Posted 23/04/07 10:31 AM Share Posted 23/04/07 10:31 AM I can tell you for a fact that it wont, my mate used to have a VL that ran 10.6 at 128-32mph with 330rwkw on jpc dyno (reads low) and that a trimatic, 4.11 diff gears and stalled it 5000rpm on launch Link to comment Share on other sites More sharing options...
Blonk Iconoclast Donating Members 4,330 Member For: 20y 2m 1d Gender: Male Location: CH Posted 23/04/07 10:33 AM Share Posted 23/04/07 10:33 AM Is this still going.. Get x-wing to drag him in his aurion Link to comment Share on other sites More sharing options...
mbjunior99 Member 4,359 Member For: 21y 11m 5d Gender: Male Location: Brisbane Posted 23/04/07 10:37 AM Share Posted 23/04/07 10:37 AM Is this still going.. Get x-wing to drag him in his aurionThe aurion would flog him Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now