Need Help Fitting Pwr Cooler.

[grepin]

Hi all.

Trying to fit my IC. First issue am I trimming metal from the right area as marked on the pic.

Also is the little bracket on the left hand side ment to match the hole as pictured.

I have no ther fitting parts as second hand unit. Does the left hand factory bracket still be used. I assume the original rubber stoppers get used but with new bolts. On the right does the bracket need any material ground off to fit?

[NATHOON]

  grepin said:

Hi all.

Trying to fit my IC. First issue am I trimming metal from the right area as marked on the pic.

Also is the little bracket on the left hand side ment to match the hole as pictured.

I have no ther fitting parts as second hand unit. Does the left hand factory bracket still be used. I assume the original rubber stoppers get used but with new bolts. On the right does the bracket need any material ground off to fit?

That bracket looks familiar

1. Bend the a/c lines toward the radiator

2. move the cooler over to the pasanger side

3 both of those brackets should line up with the holes

That cooler will sit center

Bobs your uncle