Jump to content

Cooler Thermostats


RUS531

Recommended Posts

  • Member
  • Member For: 18y 5m 4d
  • Gender: Male
  • Location: @ my laptop

just recently done 2 oil tech nights, the additives in the modern oils do not start to work until 90 degrees celsius, the oil manufacturers probably know a bit better about their product than most mechanics or tuners etc

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 12y 3m 22d
  • Gender: Male

okay yeah just cant get a thermostat for about a few day would it hurt anything with only few days driving?

does having no thermostat course damage in the long run or short term damage?

Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 16y 5m 1d
  • Gender: Male
  • Location: Adelaide

mate whats the risk worth to ya?

a 20 dollar part or potential damage

flip the coin if u cant decide

  • Like 1
Link to comment
Share on other sites

  • G666E Turbo!!!
  • Member
  • Member For: 14y 9m 15d
  • Gender: Male

cold thermostats are sh*t

my heater is sh*t

sure once the weather is warmer its a little better, but its farken cold and the heater is sh*t

I solved this problem by selling the car, new car is stock and heater works fantastic! LOL

  • Like 2
Link to comment
Share on other sites

  • Banned
  • Banned
  • Member For: 12y 3m 11d
  • Gender: Male

With oil following the coolant trend in everyday normal driving the 82 degree item has been best for me,not hi-flow just plane Jane 82*er.Oil sits at 200-210F all the time once up to operating temps,with the hi-flow 82 it was at around 185-190 and just not quite enough as explained to me.If I do skids or circuit work the hi-flow comes back out of retirement and then behaves like a normal 82* on the street oil/coolant temp wise.

in other words I have to agree with ratter and Jet.

OP,are you planning on using some sealant for the thermostat housing or something as the thermostat has the gasket around it to stop the thermostat leaking?

Edited by GTEXXED
Link to comment
Share on other sites

  • Member
  • Member For: 12y 3m 22d
  • Gender: Male

yeah ill go grab one tomorrow tested my thermostat with boiling water and did not open? but when I had it in the car temp gauge was always under half and motor was cool but thermostat housing use to get really hot even when car was only run for about 5mins??

Link to comment
Share on other sites

  • Talks Cheap, Let's Race
  • Member
  • Member For: 17y 11m 16d
  • Gender: Male
  • Location: Atherton, FNQ

if you have to run without a thermostat, you need to cut the center out of it and put the plate back in so the smaller hole keeps the water speed down and not stuff up things so much. works with carby motors, have not tried it with efi

Link to comment
Share on other sites

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 16y 7m 12d
  • Gender: Male
  • Location: Vic

71 is no good.

I'm gonna I with 71 coz a guy said a mechanic said that a tuner said that a little birdy said that someone they know said that

Dazzler said.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'