RUS531 RUS531 Donating Members 410 Member For: 18y 3m 7d Gender: Male Location: Emerald QLD Posted 30/03/07 02:31 AM Share Posted 30/03/07 02:31 AM Hey guys,How many of yous use a line level converter to add aftermarket amps to your systems?this probably refers more to the guys without the premium setup..Just want to know some opinions whether or not they produce good quality sound, or some other options for adding ampsCheers Cameron Link to comment Share on other sites More sharing options...
shockF6 Member 478 Member For: 19y 1m 23d Location: Melbourne Posted 30/03/07 02:47 AM Share Posted 30/03/07 02:47 AM In my experience with LLC's you are always better off to grab the signal before you amplify it. The ICC amplifier is quite dirty but the line level signal that the ICC generates is a good flat signal. its only downfall is the low peak to peak output.its not too hard to modify the ICC to give you line level out.you can pay someone like ASL to do it for you or if your good with a soldering iron you can have a crack at it yourself as I have done.CheersTroy Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 6d Gender: Male Location: Melbourne, VIC Posted 01/04/07 08:55 AM Share Posted 01/04/07 08:55 AM I have done it using an Alpine LLC and let me tell you it sounded like SH*T.... I would recomend against it unless you do what Shockf6 suggests, but if u tap into the rear speaker wires as I did the results are shocking. Their are different opinions though.... Save yourself the trouble and go out and buy a AudioControl LC6... Im getting mine installed soon and I picked it up for $240 Link to comment Share on other sites More sharing options...
RUS531 RUS531 Donating Members 410 Member For: 18y 3m 7d Gender: Male Location: Emerald QLD Posted 01/04/07 01:20 PM Author Share Posted 01/04/07 01:20 PM I have done it using an Alpine LLC and let me tell you it sounded like SH*T.... I would recomend against it unless you do what Shockf6 suggests, but if u tap into the rear speaker wires as I did the results are shocking. Their are different opinions though.... Save yourself the trouble and go out and buy a AudioControl LC6... Im getting mine installed soon and I picked it up for $240Hey thanks for the info mika, let me no how it all goes and if the quality is anygood cheers Cameron Link to comment Share on other sites More sharing options...
spine Donating Members 642 Member For: 18y 7m 9d Gender: Male Location: Footscrayastan Posted 01/04/07 08:09 PM Share Posted 01/04/07 08:09 PM I just installed a lc6 into my ute, then 2 amps. I think it sounds great. Give it a go, I am sure you will be surprised. Link to comment Share on other sites More sharing options...
DAWSEY Member 441 Member For: 18y 11m 17d Gender: Male Posted 02/04/07 12:39 AM Share Posted 02/04/07 12:39 AM I have found that the stinger line level converter is the best on the market.I have used most of them. the stinger one is powered and added around 15db over the jaycar ones I had in there.I also tired the alpine ones which were o.k as well...but if you can get them go the stinger ones Link to comment Share on other sites More sharing options...
RUS531 RUS531 Donating Members 410 Member For: 18y 3m 7d Gender: Male Location: Emerald QLD Posted 02/04/07 02:52 AM Author Share Posted 02/04/07 02:52 AM Cool, does the LC6 render the sound some how or is it a boosted LLC. Link to comment Share on other sites More sharing options...
DAWSEY Member 441 Member For: 18y 11m 17d Gender: Male Posted 02/04/07 07:50 AM Share Posted 02/04/07 07:50 AM I think the stinger is a boosted one as it is powered so I think it is amped somehow...I dont know alot about this stuff but they db dragged my setup back to back at the audio shop and there was about 15db diff with the stinger unit. but you would have to remember the jaycar one I was running is not the best unit to start with Link to comment Share on other sites More sharing options...
spine Donating Members 642 Member For: 18y 7m 9d Gender: Male Location: Footscrayastan Posted 02/04/07 08:16 AM Share Posted 02/04/07 08:16 AM Cool, does the LC6 render the sound some how or is it a boosted LLC.you have to add amps after the LC6 , it converts the sound from the oem deck to a good quality low noise pre amp signal. it also has seperate output level controls. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 3m 6d Gender: Male Location: Melbourne, VIC Posted 02/04/07 09:00 AM Share Posted 02/04/07 09:00 AM For those who have had them installed... where do they actually install it... its sorta big so im thinking in the boot? Can ya choose? I want it in the boot.... I have a spot on the back of my sub box prepped for it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now