BMAC Member 23 Member For: 16y 3m 24d Gender: Male Location: Adelaide Posted 02/05/09 02:04 PM Share Posted 02/05/09 02:04 PM Matt Stirling - Growley Custom Machining in Gillies Plains . I will give Ya one of his buisness cards on at the Mannum run if your going . Youll just have to remind me - you know - old timers disease . Link to comment Share on other sites More sharing options...
arjey VOTE ROOTSTER 2010 Member 591 Member For: 16y 1m 30d Gender: Male Location: Wollongong Posted 10/05/09 02:20 AM Share Posted 10/05/09 02:20 AM yeah noticed my brakes were shuddering hardcore coming down mac pass on the last NSW cruise. new car warranty runs out very soon so I guess I'll start modding and go aftermarket brakes! Link to comment Share on other sites More sharing options...
trevs Member 781 Member For: 17y 6m 20d Gender: Male Location: balmain Posted 11/05/09 10:03 AM Share Posted 11/05/09 10:03 AM out of interest at what speed are most ppl getting brake shuddering ive got dba slotted 4000 and its returned but only above about 115kph can cheap maxxis tyres cause what feels like brake shudder .besides rotors ,tyres and wheel bearings what else should I be checking to solve this problem its really giving me the sh*ts its not like I drive like a nutter everyday cheers trev Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 2m 22d Gender: Male Location: Zombie Birdhouse Posted 11/05/09 10:08 AM Share Posted 11/05/09 10:08 AM had DBA slotted 4000s on the T , best upgrade ever. Other than 100 rwkw.You shouldn't get shudder, what pads are you running ? Link to comment Share on other sites More sharing options...
trevs Member 781 Member For: 17y 6m 20d Gender: Male Location: balmain Posted 13/05/09 09:43 AM Share Posted 13/05/09 09:43 AM im using Ferodo Formula pads ive noticed its getting worse at speed above 110 kph but its perfect below that you can feel it the most when just touching the brakes at about 115, 120 kph and at the same speed when really jumping on the brakes makes a weird noise too but the more it happens the more I think it has something to do with my cheap maxxis tyres maybe the heaps of sh*t are uneven or something ? any ideas befor I start pulling sh*t apart on the weekend im gonna remove the rotors clean behind them with some sand paper and file and check to see if they are wearing uneven or not maybe get the local brake centre to wack them on the lathe cheers trev Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 3m 5d Gender: Male Location: Melbourne Posted 23/05/09 10:57 AM Share Posted 23/05/09 10:57 AM Gents,I have just replaced the front rotors on my '04 T with DBA 4000 Series 6x6 slotted and Bendix Ultimate pads and are very happy so far. A simple job to do and the pedal feels a little more "solid" and less spongy. Stopping power seems to be a bit better too (not yet run in though)I got the rotors and pads from Hi Tek Brakes in Moorabbin with the rotors being $290 for both and $125 for the pads - ask for Cam. Those guys did a great job of looking after me.I will stick with the standard rear rotors and get the Ultimate pads for the rear when needed.RegardsKenHey Ken, did Hi Tek Brakes fit them for you or did you do that yourself. I haven't picked up my BA yet, but already I know I may have to get the brakes upgraded from the test drive. But at least am going in eyes wide open. This'll be my 3rd XR6. First one, BA XR6, had huge brake shudder but thankfully under warranty, so every 3 months or so, would take it in for machining. Second one, BF XR6T didn't have any brake shudder So looks like it will be DBA 4000 Series 6x6 slotted with Bendix Ultimate pads or what ever is the latest from DBA and Bendix. Plan on only doing the front. I think I read that $700 was the cost for the parts and fitting from another place. Not too bad considering I used to own an Audi A4 and well ummm lets just say be prepared to part with anything north of $1000 per service Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 3m 5d Gender: Male Location: Melbourne Posted 23/05/09 11:02 AM Share Posted 23/05/09 11:02 AM Hi all my 2006 BF XR6T has Ford Premium brakes (PBR) and always had a high speed shudder . I fixed the issue my self in an afternoon by replacing the rotors with slotted ones . The shuddder was comming from the gasses from the hot pads being trapped against the smooth face ofthe rotor , slots alow this gas to get away .That's a real interesting hypothesis. So is the one from Maximus about pads heating up spots on the discs. Link to comment Share on other sites More sharing options...
ravenhard Donating Members 1,517 Member For: 16y 8m 7d Gender: Male Location: Blacktown! Posted 23/05/09 01:32 PM Share Posted 23/05/09 01:32 PM I would find that interesting too considering that the Ford Premium brakes (PBR) already had eliptical slotted rotors, so changing to slotted rotors wouldnt have been much difference in my opinion Link to comment Share on other sites More sharing options...
trevs Member 781 Member For: 17y 6m 20d Gender: Male Location: balmain Posted 23/05/09 10:07 PM Share Posted 23/05/09 10:07 PM (edited) im using Ferodo Formula pads ive noticed its getting worse at speed above 110 kph but its perfect below that you can feel it the most when just touching the brakes at about 115, 120 kph and at the same speed when really jumping on the brakes makes a weird noise too but the more it happens the more I think it has something to do with my cheap maxxis tyres maybe the heaps of sh*t are uneven or something ? any ideas befor I start pulling sh*t apart on the weekend im gonna remove the rotors clean behind them with some sand paper and file and check to see if they are wearing uneven or not maybe get the local brake centre to wack them on the lathe cheers trevok checked for bearing run out nothing , rotors are even ......next week im getting the control arm bushes and ball joints changed along with some sway bars fitted if it still does it then it has to be the tyres or maybe one or two of my rims are out of round or something because ive tried putting the back tyres on the front any ideas anyone its really starting to piss me off big time ?cheers trev Edited 23/05/09 10:16 PM by trevs Link to comment Share on other sites More sharing options...
EvilDaifu Cruise Whore Moderating Team 5,130 Member For: 19y 3m 5d Gender: Male Location: Melbourne Posted 30/05/09 10:01 PM Share Posted 30/05/09 10:01 PM Well done a check and High Tek Brakes will cost about $1050 for the DBA 4000 upgrade http://www.hightekbrakes.com.au/brakeupgrades.html and that is just the DIY kit. I'd like to have them fitted as well.Has anybody got other referrals they could give me where they have upgraded their brakes? Looking for around the Melbourne area - not fussy if I have to drive to the edge of town. Just would like to go to a good place that fits parts which have proven to perform hassle free to get rid of brake shudder - don't need V8 supercar performance brakes.Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now