Headsex Donating Members 2,528 Member For: 19y 4m 2d Gender: Male Location: Melb Posted 18/02/07 06:57 AM Share Posted 18/02/07 06:57 AM Ok.. being sick of only seeing 11.5psi top rpm commanding 100% duty cycle, I finally got myself motivated to fit my actuator... But I was not going to fit it without upgrading the wastegate flapper valve.Here are some picsJohnny is a Dentist, we cannot show you his face..who needs heat sheilds anyways.. And yes. the front heat sheild "falls off easy" if you know howOMFG SOMEONE STOLE MY TURBOOh no. there it is. it just fell on the groundthat's it. Roll over "Turbos"Dump ViewView without exhaust housingShiney new exhaust housing modified with bigger wastegate port and flapper. Thanks to mark for supplying me with this in order to "exchange housing" without having my car off the road whilst my housing gets modifiedHere is the std wastegate flapper vz the upgraded wastegate flapper. Like my hairy legs?A view with the flaps open.. Notice the size in the port. Hrm.. Maybe I should shave my legs?12psi actuator.. Pfft with a 8psi. Only people who sit while they pee get a 8psi actuator :>Ohh look brand new again<cont> 1 Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 4m 2d Gender: Male Location: Melb Posted 18/02/07 06:58 AM Author Share Posted 18/02/07 06:58 AM Close upClose up with actuator mountedAnother useless photo.. But .. Jimmy, Are you wearing thongs you ethnic?I dont really look as happy as the picture shows...Yes.. I do have a double chin..Yes... I Did mount that back in there... that was the easy partYes.. nearly there... but that bloody drivers side banjo fitting done my head in.. <moves hand and wrist backwards and forwards> "Full Clean Ups" with 15psi boostSaturday, 40degree day.. NO PROBLEMS THANKS TO MR COOLER.. Filled with ice, door shut, and rollerdoor pulled down behind bonnet.. Notice no sweatie pits? It was very cool actually !!Hey Jimmy, What ya think about the xr6 Turbo?? Top Bloke.. Hows your sister doing?I said nothing about your sister... Dont bash me!!In Conclusion.. After fitting the turbo back.. starting it up, filling the coolant back up again, I reprogrammed the duty table, and after datalogging found myself having duty cycle around .45 at 3500rpm and slightly tapering upto .55duty at 5500rpm to get to my desired 14psi. Boost is rock solid, I'm using the PI controller built into the PCM to bring it close to my desired boost of 14psi, there is no overboost past 14psi as it comes on boost.Sure. Maybe techno talk. But alot of tuners do not tune this way using the PI controller.. They tune via duty cycle only, No Closed loop control.. So higher boost cold nights, less boost on hot days like today.. No feedback what so ever..AFR's are around 12.2, and until I hit the dyno next week, I will fine tune it to 15-16psi, and give it some more spark up top and see what rwkw it produces.Danny Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 4m 2d Gender: Male Location: Melb Posted 18/02/07 07:02 AM Author Share Posted 18/02/07 07:02 AM I have to say a big thanks to Johnny (HINRG), Jimmy (ForcedXR6) for helping out on such a hot day and Mark (FSIX) for supplying me with a exhaust housing I can modify without removing mineDanny Link to comment Share on other sites More sharing options...
spine Donating Members 642 Member For: 18y 7m 25d Gender: Male Location: Footscrayastan Posted 18/02/07 07:05 AM Share Posted 18/02/07 07:05 AM informative post there headsex, good pics too!So whats jimmys sister like anyway? Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 4m 2d Gender: Male Location: Melb Posted 18/02/07 07:08 AM Author Share Posted 18/02/07 07:08 AM informative post there headsex, good pics too!So whats jimmys sister like anyway?←Dude.. See the look I got? Bad subject Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 4m 2d Gender: Male Location: Melb Posted 18/02/07 07:10 AM Author Share Posted 18/02/07 07:10 AM ps.. before there is any more sister jokes. I never actually asked Jimmy about his sister... Link to comment Share on other sites More sharing options...
FSIX Member 566 Member For: 19y 1m 18d Posted 18/02/07 07:28 AM Share Posted 18/02/07 07:28 AM (edited) Good work Danny its a bugger of job getting that bottom right hand bolt.who's next Jimmy or Johnny?Jimmy would you have Danny for a brother in law..lol.. Edited 18/02/07 07:35 AM by FSIX Link to comment Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 4m 2d Gender: Male Location: Melb Posted 18/02/07 07:39 AM Author Share Posted 18/02/07 07:39 AM Its going to be a battle between jimmy and johnny Link to comment Share on other sites More sharing options...
mbjunior99 Member 4,359 Member For: 21y 11m 20d Gender: Male Location: Brisbane Posted 18/02/07 08:00 AM Share Posted 18/02/07 08:00 AM Great commentary there Link to comment Share on other sites More sharing options...
RAPHOON Donating Members 1,776 Member For: 21y 5m 16d Posted 18/02/07 08:07 AM Share Posted 18/02/07 08:07 AM Nice write up. Let us know how the changes translate on power delivery once youhave a chance to put it on the dyno. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now