NA-06-XR Member 112 Member For: 17y 10m 26d Posted 02/04/07 03:14 AM Share Posted 02/04/07 03:14 AM hey guys.. as you all are probably wondering... I have the results of my time in melbourne with the capable men at Nizpro...Results: Part (1) - Dropped car in on Monday, Simon did a power run as a base on monday and apparently ran an interestingly low 172rwkw... Simon orderd a 4495 and had a look, thought it was interesting but said that the extractors hadn't accounted for firing order. At that point he decided to construct his own and said he would put a BF turbo exhaust on the end. I agreed and work began. Phone call on wednesday afternoon work had been completed and they were about to do a run and then start tuning.Part (2) - Gave Simon a ring about thursday late morning (11:30ish) and he said they've been tuning it all over the place and haven't been able to make any power and were about to begin a Leakage test and to give them a call later that afternoon. Heart Sinks and mind goes wild with thoughts... End result was that cylinder 2 was leaking 13% and cylinder 3 leaking 35%... (the rest were 5% or less)... the Car was NOT going to make power in its current state... End result was apparently a power figure of 176 or so... Car is running fine though and went all the way to parkes from melbourne without any trouble...EvaluationMy end evaluation of the time is that something has to have gone wrong somewhere. My last dyno run since Nizpro was C&V's which on their Dyno 2 mths ago ran 188rwkw... since then at nizpro's ending up being 172... that's a QUICK drop in 2 mths... so something's going on...Car is going into my local trusted Ford workshop for analysis for the rest of the week at which point I'll have to look at cylinder repair or Bottom end replacement (or other depending on result of analysis)...Away from that topic... the exhaust and extractors...the Extractors are a MEAN piece of work ! ! !It looks similar if not exactly like the photos at the exhaust/extractor thread resembling a look alike turbo or a snail shell... the Exhaust is silent mostly and has an improvement on midrange torque and response...Overall its gone alright except the part where I've found out I'm losing compression... So I'll keep everyone updated on whats happening...(I think I'll adjust my signature appropriately...)Daniel Link to comment Share on other sites More sharing options...
NA-06-XR Member 112 Member For: 17y 10m 26d Posted 02/04/07 03:20 AM Share Posted 02/04/07 03:20 AM One thing to note though... Simon let on...He has completed a crate BA 4.0L engine for a super sedan which had a resulting power figure of 385 Fly wheel kilowatts...that's our potential guys!!! Link to comment Share on other sites More sharing options...
ryansxr6 Member 18 Member For: 17y 9m 21d Posted 02/04/07 04:21 AM Share Posted 02/04/07 04:21 AM 385 at the fly I would bye that creat engine haha Link to comment Share on other sites More sharing options...
Guest Guests Posted 11/04/07 04:58 AM Share Posted 11/04/07 04:58 AM heres my old time slip for a 15.003 run at WSID its still my PB without NOS as the clutch is on deaths door and needs to go.These days with over 35 rwkw more power than when I did the 15.003 pass I just go slower which shows the limit of the stock clutch to be very low. Link to comment Share on other sites More sharing options...
Doogstar Member 276 Member For: 17y 10m 8d Posted 14/04/07 05:44 AM Share Posted 14/04/07 05:44 AM (edited) Hey Guys,Took the car out to Calder last night to try out the new hi-stall. After my last run there, I was hoping Friday the 13th would be lucky for me.Here are my four runs of the night, first run of the night and my new PB is..14.221@95.81mph 60ft=1.97114.280@95.58mph 60ft=1.97514.306@95.31mph 60ft=1.98414.260@95.76mph 60ft=2.005I am so happy Puts me in second place...whooohooo!sorry about the quality. Edited 15/04/07 01:04 AM by Dagabond Link to comment Share on other sites More sharing options...
xhxrsix Member 174 Member For: 17y 11m 28d Gender: Male Location: Melbourne Posted 14/04/07 06:59 AM Share Posted 14/04/07 06:59 AM wow that's awesome! well done. not far to go now for a 13.... Link to comment Share on other sites More sharing options...
EZ2CME Formerly XR6NA Member 3,512 Member For: 18y 11m 5d Gender: Male Location: Brisbane Posted 14/04/07 08:02 AM Share Posted 14/04/07 08:02 AM Nice time. How much further do you want to take it? Link to comment Share on other sites More sharing options...
useless Member 259 Member For: 20y 5m 2d Gender: Male Posted 14/04/07 08:53 PM Share Posted 14/04/07 08:53 PM Good work mate..see you in Victoria next month!! Link to comment Share on other sites More sharing options...
Guest Guests Posted 15/04/07 01:44 AM Share Posted 15/04/07 01:44 AM that's an out standing time, a little head work and 13's will be to easy.Well Done, wish it was me, I think the auto guys may have the right tools for the job.What mods are next? Link to comment Share on other sites More sharing options...
Doogstar Member 276 Member For: 17y 10m 8d Posted 15/04/07 02:59 AM Share Posted 15/04/07 02:59 AM that's an out standing time, a little head work and 13's will be to easy.Well Done, wish it was me, I think the auto guys may have the right tools for the job.What mods are next?Hey Greg,Thanks mate, might try again with slicks, front runners and some weight reduction, then see what happens from there. A well set up manual should be better than an auto, considering less RWKW are chewed up through the auto. Consistency with the auto is going to be better depending on the driver. I have no complaints anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now