BFHOON Donating Members 1,932 Member For: 18y 9m 7d Gender: Male Location: nsw Posted 24/08/07 10:37 PM Share Posted 24/08/07 10:37 PM just wondering where you got the softer spring from as I have put an aftermarket bov on mine and it seems as there isn't enough pressure for the bov to open properlyI used an su carby spring using the tuning kit from my old datto I think it was a number 7.bunnings have heaps of cheap springs too of all different sizes and tensions. Link to comment Share on other sites More sharing options...
Rydeit Member 327 Member For: 12y 5m 21d Gender: Male Location: Adelaide S.A Posted 05/02/13 01:58 PM Share Posted 05/02/13 01:58 PM Sorry to bring up an ancient thread. But in simple to block the bov I get a 1" stopper an put it in the bov hole and bloke the vacuum line with a nail or something? That it? Link to comment Share on other sites More sharing options...
Rydeit Member 327 Member For: 12y 5m 21d Gender: Male Location: Adelaide S.A Posted 05/02/13 04:29 PM Share Posted 05/02/13 04:29 PM The vacuum line is the one coming out on the right with writing on it yeh? Sorry new to this sh*t Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 1m 23d Gender: Male Location: left right out Posted 05/02/13 05:45 PM Share Posted 05/02/13 05:45 PM Yes, sure is. you want it blocked to avoid sucking dust n junk into your engine.Chair stoppers for the other big hoses and your done. Link to comment Share on other sites More sharing options...
Rydeit Member 327 Member For: 12y 5m 21d Gender: Male Location: Adelaide S.A Posted 05/02/13 11:42 PM Share Posted 05/02/13 11:42 PM Thanks hawlass. Do I need two chair stoppers. One for the pipe on the left and the one with the clamp. Or just the one with the clamp Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 5m 11d Gender: Not Telling Posted 06/02/13 01:12 AM Share Posted 06/02/13 01:12 AM If you want to retain the factory look, you can use 2 X 600ml coke bottle lids. I removed the ridges on the lids ( with a smooth finish, but its not really necessary, so I could get them out of the hosing easier). Put them over both of the crossover outlets and placed hosing back on and clamped where the lids are. Easy, 100% effective and looks just like factory except thr clamps are closer to the end. Cheers 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 8d Gender: Male Location: Perth Posted 06/02/13 01:16 AM Share Posted 06/02/13 01:16 AM Or do it right and remove the bov and install thesehttp://www.sonicperformance.com.au/BOV-Blanking-Plug/Turbosmart-Blow-Off-Valve-Hose-Blanking-Plug/pd.php Link to comment Share on other sites More sharing options...
HYPEDF6 Donating Members 301 Member For: 12y 22d Gender: Male Posted 06/02/13 01:24 AM Share Posted 06/02/13 01:24 AM Isnt coke bottle lids proper ? OH Link to comment Share on other sites More sharing options...
spinr33 Donating Members 964 Member For: 13y 4m 14d Posted 06/02/13 04:09 AM Share Posted 06/02/13 04:09 AM Don't the chair stoppers come in a 4 pack lol useful if you have a walking stick to use the spares on .... Link to comment Share on other sites More sharing options...
NickBA-XR6T Bronze Donating Members 386 Member For: 12y 9m 20d Posted 06/02/13 05:23 AM Share Posted 06/02/13 05:23 AM I used chair stoppers from bunnings and some hose clamps. 10 min job removing the stock bov.Excuse the plenum it hasn't been sandblasted yet. Work in progress. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now