jmac Member 12 Member For: 19y 3m 3d Posted 10/02/07 09:28 AM Share Posted 10/02/07 09:28 AM Hey guys,From searching it seems the BA offset is +36, but things vary a bit with Ford's wheels from +32 to +40.I have a set of Buddy Club P1's (from a Nissan) that have the Ford stud pattern.They are 17" wheels, fronts 8" width, offset +32, rears 9" width, offset +37.Will these fit on an XR6T?Cheers! Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 21y 11m 13d Location: nowhere in particular Posted 10/02/07 10:54 PM Share Posted 10/02/07 10:54 PM Dunno what Buddy Club P1's are but my 19 x 9.5" Fusions fit on the back of my mate's Skyline if that helps any. I say they probably would fit. Link to comment Share on other sites More sharing options...
2fardown Member 526 Member For: 19y 6m 18d Gender: Male Location: Brisbane Posted 11/02/07 12:07 AM Share Posted 11/02/07 12:07 AM They'd look way too small on a falcon, specially in 17". Link to comment Share on other sites More sharing options...
ktford FORD FORD FORD Donating Members 9,390 Member For: 21y 8m 12d Gender: Male Location: Victoria Point In Brissy's eastern side Posted 11/02/07 12:12 AM Share Posted 11/02/07 12:12 AM why you say that far down the hole man? Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 6m 10d Gender: Male Location: Sydney NSW Posted 11/02/07 12:17 AM Share Posted 11/02/07 12:17 AM I'd like a set in 19 if the offsets are correct, HEAPS lighter than the heavy ones I have now Link to comment Share on other sites More sharing options...
jmac Member 12 Member For: 19y 3m 3d Posted 11/02/07 02:52 AM Author Share Posted 11/02/07 02:52 AM Thanks, yeah I'll have them left over after I sell my Skyline, they have semi-slick rubber on them so if I decide to track the BA for a laugh then I won't need other wheels. Link to comment Share on other sites More sharing options...
Turbo6man Lifetime Members 4,084 Member For: 22y 1m 19d Gender: Male Location: South Coast NSW Posted 11/02/07 05:37 AM Share Posted 11/02/07 05:37 AM They will fit just fine (as far as width and offset) and will be good for track days - only thing you'll have to check is the hub centre bore - some Nissans had smaller centres (like the older Fords) Link to comment Share on other sites More sharing options...
jmac Member 12 Member For: 19y 3m 3d Posted 11/02/07 10:57 AM Author Share Posted 11/02/07 10:57 AM Cool yeah will just try to get them on the car this week and see.This is what they look like for anyone curious (not a photo of my car though): Link to comment Share on other sites More sharing options...
locknut Member 26 Member For: 15y 2m 13d Gender: Male Location: Canberra, ACT Posted 16/10/10 03:06 AM Share Posted 16/10/10 03:06 AM (edited) Doing some thread mining on these wheels..Anyone seen P1 Racing II's on a BA/BF? I know they're popular on Jap cars, but they're lightweight, and have suitable fitments. Can't find a pic anywhere fitted to a Falcon! Edited 16/10/10 03:07 AM by locknut Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 16y 5d Gender: Male Location: Perth Posted 16/10/10 04:38 AM Share Posted 16/10/10 04:38 AM P1s will fit, just if you have brembos it might not clear.as P1s come in 17s and lower. no 18s etcif you are keen on the Style, id say consider getting R34 GTR rims, getting the hub bore, bored out to falcon spec (about $40 a rim usually), and removing centre cap.they look very similar to P1s Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now