YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 6m 8d Gender: Male Posted 03/02/07 03:42 AM Share Posted 03/02/07 03:42 AM Hey people well as the title say's I need to remove my lock nut and I have lost the key, some one told me to bash the closest size socket I could find on there and that will work.Well they where WRONG now the teeth on the lock nut are nearly completly striped off, but I stoped so there is still a bit there.So now how the hell and were do I go to get my bloody rims off.Not a happy man Link to comment Share on other sites More sharing options...
FPV TRANNY Im the one and only Donating Members 3,557 Member For: 19y 10m 4d Gender: Male Location: In my house Posted 03/02/07 03:53 AM Share Posted 03/02/07 03:53 AM I had to bash a socket on to mine but I used a rattle gun to shock it loose. Next thing is weld a socket on it Good luck mate and I know how you feel Link to comment Share on other sites More sharing options...
Dr Concrete Member 69 Member For: 19y 4m 8d Location: Adelaide Posted 03/02/07 03:55 AM Share Posted 03/02/07 03:55 AM The socket idea was your best bet, but you probably used the wrong size. The next best idea is to use a hammer and chisel, but before you try that do the socket idea again. Link to comment Share on other sites More sharing options...
YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 6m 8d Gender: Male Posted 03/02/07 03:59 AM Author Share Posted 03/02/07 03:59 AM The socket was the only size that would fit so I couldnt of used another one without bashing all the teeth off. the welder idea sound's good but my locknuts sit inside the wheel so I dont think I could get the head of a welder in there but that would be the wat to go.Im farked I dont know what to do. Link to comment Share on other sites More sharing options...
ROLMDL role model Member 1,111 Member For: 18y 8m 1d Gender: Male Location: Melbourne,S.E Posted 03/02/07 04:57 AM Share Posted 03/02/07 04:57 AM I had the same problem before I had bob jane just weld the lock nut and did the job Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 19y 10m 27d Gender: Male Location: Strapped in and holding on Posted 03/02/07 05:34 AM Share Posted 03/02/07 05:34 AM From my interpretation, you ARE supposed to knock the grooves out of the lock nut. Sorry, but you have to butcher the thing and ram the socket onto the nut!!Then, go and buy 4 new ones Link to comment Share on other sites More sharing options...
Trough Lolly Member 4,349 Member For: 20y 2m 3d Gender: Male Location: Mildura Posted 03/02/07 06:01 AM Share Posted 03/02/07 06:01 AM try a centrepunch inside the holes and tap it around slowly this worked once on a customers car.providing u have that type of nut. if u have the outer type just use a socket or weld sumthin to it. Link to comment Share on other sites More sharing options...
YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 6m 8d Gender: Male Posted 03/02/07 06:25 AM Author Share Posted 03/02/07 06:25 AM Thanks for the info guy's but my dad the champion got 3 of them off and one is lets just half off lol, we did the socket trick again but he used the sockets that have more than the 6 stud point ( if you know what I mean) so it had more grip.We also used a hammer and chisle for the one we ccouldnt get off but it was getting to hot so will save it for another day.There would of been no way a welder could of gotten in as the studs are set into the rim, I can only use thin walled sockets aswell that's how dam tight it is.But I have the backs off which is the main thing as that's what I need off to get the roady, because my tyres are to bald.Thanks again guy's Link to comment Share on other sites More sharing options...
YPURV4 KILL,KILL,KILL,DIE,DIE,DIE, Member 2,813 Member For: 18y 6m 8d Gender: Male Posted 03/02/07 06:29 AM Author Share Posted 03/02/07 06:29 AM From my interpretation, you ARE supposed to knock the grooves out of the lock nut. Sorry, but you have to butcher the thing and ram the socket onto the nut!!Then, go and buy 4 new ones ←That wasnt the case with me I needéd the groves so the socket would grip so it could turn the nut.that's why we couldnt get the front one off as we grinded all the groves and the rest of the lock nut sit inside the rim so we couldnt bash a socket over it.I think its just my rims Link to comment Share on other sites More sharing options...
ROLMDL role model Member 1,111 Member For: 18y 8m 1d Gender: Male Location: Melbourne,S.E Posted 03/02/07 06:32 AM Share Posted 03/02/07 06:32 AM You get defected michael? lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now