New Interceptor Gauges!

[Robit28]

I am currently establishing a dealer status for the supply of interceptor gauges.

These gauges pull information from the OBD-II port of the vehicle and can display 2 simultaneous data readings (selectable) and can be daisy chained together with two gauges to show 4 data readings (or 6 with 3 gauges in phoons new pod!)

They will also give you performance times (0-100 calculated from the speed sensor so it's accurate) and also contain a built in high brightness shift light.

I was wondering how much interest there would be in a gauge like this if it retailed for around $290?

The gauges can also read and clear DTC's through a menu system.

They come in a range of colours but I think the blue most suits the T's and Phoons.

Let me know what you think.

I am currently doing some testing on the BA-BF's to determine the amount of data that can be obtained as the CAN version is not yet available but will be soon.

Regards,

Rob.

[FSIX]

Great idea, is the set-up through the OBII difficult does it just plug in.

$290 for 2 gauges, how much extra for the 3rd and for those that want to keep there beazel front from the FPV gauge setup is this possible?

Edited 18/01/07 04:10 PM by FSIX

[quigebo]

Great idea, is the set-up through the OBII difficult does it just plug in.

$290 for 2 gauges, how much extra for the 3rd and for those that want to keep there beazel front from the FPV gauge setup is this possible?

←

id be interested depending on how some of FSIX's questions are answered.. maybe

Edited 18/01/07 06:26 PM by quigebo

[nz-xr6t-lufa]

yep if you can do it in nz.

[Robit28]

Great idea, is the set-up through the OBII difficult does it just plug in.

$290 for 2 gauges, how much extra for the 3rd and for those that want to keep there beazel front from the FPV gauge setup is this possible?

←

There is a standard OBD plug for the interface into the vehicle. I am yet to receive my test units so will be able to give more accurate answers when I get them. If the plug is too bulky to fit behind the panel cover, I will look at replacing thes plugs with a low prifile 90 degree plug so the panel will conceal the plug.

The $290 is for each gauge (2 1/6 inch), but each gauge displays two lines of data if that makes sense, sorry if I had not communicated this effectively!

I will be doing better pricing obviously for 2 & 3 gauge buys and a group buy would give us even more savings.

As far as the FPV gauge pod goes, I will also have to wait for the demo units to arrive. I have an FPV pod that I will be trying out.

I may have to modify these to suit the FPV pods but will do the modifications before they leave to go to the customer, that way you keep your warranty!

Any other questions feel free to ask as I really am gauging interest at the moment but really believe in this product so want to back it 100%.

Regards,

Robert.

Edited 18/01/07 08:48 PM by Robit28

[MUZ580]

I'm interested if they are the right price for 2 on a group buy.

I guess they'll fit straight into Miss Ally's pods if they fit the typhoon pod?

[cobrav8]

I would be interested in one at that price - please put me down on your list.

I take it that you can display two readings, but can select any others at any time?

When you can - post up a list of items that can be displayed.

[ZAP]

Robert,

Did Todd from Aeroforce tell you about another XR6 Turbo guy waiting for these ?

I have been in contact with them for the past 2 years waiting for the CANbus version.

I am very interested, but I was going to get an eval unit first to see if and how they work.

It is possible they will read and display everything, but then it is possible that it will only read the basics. I would like to see what it will do before I made any commitment to purchase them.

I will be looking to get the dual setup to replace the factory F6 setup.

P.S I had no interest in becoming the Oz disti as I have enought to do, so if you are going to sell them, then I will get them from you if they are able to display what we need.

P.S.S - For anyone wanting somthing a bit different, then these are the gauges for you. They will do injector duty cycles, oil/water temp, oil pressure, fuel pressure, the list will go on and on. For the money they are AWSOME.

[Phoon]

Love the look of them, if they can be fitted and work with BA's, I would be interested also.

[Ralph Wiggum]

I'l take two provided they can function as Zap_F6 described...