DennisRB30 Member 49 Member For: 21y 6m 9d Posted 09/01/07 03:04 AM Share Posted 09/01/07 03:04 AM I'm going to make a dump pipe for my 2JZ powered skyline with a GT35R from an XR6 so I am after some pics of split and single dump pipes. I am having trouble finding any. Please post pics or give some links. Even manufactures names would be very helpful.Cheers Dennis. Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 7m 19d Gender: Male Location: Sydney NSW Posted 09/01/07 10:09 AM Share Posted 09/01/07 10:09 AM Toy motor in a skyline... sounds interesting.Xforce make a dump, try googling that but there's pics on here somewhere... search away. Link to comment Share on other sites More sharing options...
BFHOON Donating Members 1,932 Member For: 18y 9m 15d Gender: Male Location: nsw Posted 09/01/07 10:20 AM Share Posted 09/01/07 10:20 AM hello againhows that rocket ship coming along...as said the search function on here will bring up some threads on the topic but I find it a bit hard to use somtimes when searching for somthing in particular.what do u think about using a stocker dump front bit then go some custom pipework off that to go where u want it to go.I would say there would be somone on here with a stocker cheap. Link to comment Share on other sites More sharing options...
Benny Member 1,869 Member For: 21y 5m 2d Gender: Male Location: Newcastle Posted 10/01/07 03:51 AM Share Posted 10/01/07 03:51 AM Something like this I'm guessing your after. Link to comment Share on other sites More sharing options...
DAWSEY Member 441 Member For: 19y 29d Gender: Male Posted 10/01/07 07:47 AM Share Posted 10/01/07 07:47 AM magic performance do a great 4.5 inch and a 4inch dump.I am using the 4.5 and it is great Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 24d Gender: Male Location: Strapped in and holding on Posted 10/01/07 09:04 AM Share Posted 10/01/07 09:04 AM great ....... ........ ... . ..... .. Dfilipo do a split 3" ( seperate wastegate pipe )Stockie is good though, it's still 3" Link to comment Share on other sites More sharing options...
01txr Member 861 Member For: 17y 11m 25d Gender: Male Location: QLD Posted 21/01/07 03:26 PM Share Posted 21/01/07 03:26 PM magic performance do a great 4.5 inch and a 4inch dump.I am using the 4.5 and it is great←Has this got seperate wastegate pipe or is it consealed in dump?How much are the 4" dumps from them? Link to comment Share on other sites More sharing options...
01txr Member 861 Member For: 17y 11m 25d Gender: Male Location: QLD Posted 21/01/07 03:31 PM Share Posted 21/01/07 03:31 PM great ....... ........ ... . ..... .. Dfilipo do a split 3" ( seperate wastegate pipe )Stockie is good though, it's still 3"←How much are Dfilipo 3" dump pipes?Also has anyone heard anything about exhaust autobarn can supply fot xr6t, I have been told it is a very good exhaust and is a lot cheaper than alot of other systems on the market.I will find out more details tomorrow if I get time. Link to comment Share on other sites More sharing options...
DennisRB30 Member 49 Member For: 21y 6m 9d Posted 25/01/07 03:32 PM Author Share Posted 25/01/07 03:32 PM (edited) Cheers guys. I just ended up making a single 3.5" dump which joins my 80mm system, see pic. It must flow OK since it creeps pretty bad in 35 degree heat.Hows it coming? Well crap ATM. The stock turbos ran 12.5 @ 115mph. With the XR6 spec GT35 it ran 13.6 @ 108mph. This was due to not being able to control boost. The stockers were running around 18-19 PSI. The GT35 was running 10psi in first and second and most of the way through 3rd until right before the 400m mark it would spike to 1 bar and hit the fuel cut. I am trying to sort the wastegate out by porting it so I can get some sort of decent boost control then run 15-20psi in every gear. Edited 25/01/07 03:36 PM by DennisRB30 Link to comment Share on other sites More sharing options...
DennisRB30 Member 49 Member For: 21y 6m 9d Posted 25/01/07 03:37 PM Author Share Posted 25/01/07 03:37 PM (edited) Pic Edited 25/01/07 03:39 PM by DennisRB30 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now