SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 15y 11m 27d Gender: Male Posted 25/12/09 11:07 PM Share Posted 25/12/09 11:07 PM which Nulon product? Link to comment Share on other sites More sharing options...
hades302 Member 8 Member For: 14y 10m 11d Posted 02/02/10 09:09 AM Share Posted 02/02/10 09:09 AM Hi iv had my ba xr6t for about 3 months when I got it the Boost Solenoid wire connector was disconnected for some reason any ideas why somone would of disconnected this. The car has only had 2 owners me and first owner and im pritty sure the first owner wouldnt of disconnected this.Do some come disconnected from factory maybe. Link to comment Share on other sites More sharing options...
Guest newl Guests Posted 02/02/10 11:53 AM Share Posted 02/02/10 11:53 AM Nope, they all come from the factory with the wiring to the boost solenoid connected.While you're tinkering with it, be sure to read the Boost Solenoid Maintenance thread. Link to comment Share on other sites More sharing options...
BensXR6T Member 478 Member For: 15y 11m 7d Gender: Male Location: Burpengary QLD Posted 02/02/10 12:01 PM Share Posted 02/02/10 12:01 PM I'd imagine it's been unplugged during some maintenance and forgot to be plugged back in. Probably won't make much of a difference to performace when unplugged as the boost would still be getting controlled by the actuator spring. Link to comment Share on other sites More sharing options...
Higgo78 Member 45 Member For: 14y 10m 29d Gender: Male Location: Newcastle Posted 10/02/10 01:30 PM Share Posted 10/02/10 01:30 PM Hi guys n gals, just purchased my first XR6T. It is the ex Plazmaman Demo Car. For a car that is meant to be in good condition, I am finding otherwise. I decided to take battery out an do this simple maintenance. My question is is there meant to be a hose connected to the other end of the solenoid? I.e There is a top hose, and halfway down the solenoid there is a rightangle T piece which has a hose coming of it. But the bottom connection has no hose connected to it....Is this normal??? Any help would be greatly appreciated Link to comment Share on other sites More sharing options...
arjey VOTE ROOTSTER 2010 Member 591 Member For: 16y 3m 2d Gender: Male Location: Wollongong Posted 26/02/10 12:41 PM Share Posted 26/02/10 12:41 PM Note to everyone - be careful if you unscrew and take out the solenoid completely! There is a hose that goes to the actuator. I didn't realize, then I went for a drive and it was sick! But an o2 sensor goes off and your car goes in limp mode... Also, if you tug at the hose that leads to the turbo and it came off and you are wondering where it goes.. Unscrew the rubber connector thing'o mi-bobby-o off the inlet of the turbo and under the inlet of the turbo you will see a nipple (haha I said nipple) .. that's where it goes.Another note from the n00d in training Link to comment Share on other sites More sharing options...
arjey VOTE ROOTSTER 2010 Member 591 Member For: 16y 3m 2d Gender: Male Location: Wollongong Posted 26/02/10 12:42 PM Share Posted 26/02/10 12:42 PM Hi guys n gals, just purchased my first XR6T. It is the ex Plazmaman Demo Car. For a car that is meant to be in good condition, I am finding otherwise. I decided to take battery out an do this simple maintenance. My question is is there meant to be a hose connected to the other end of the solenoid? I.e There is a top hose, and halfway down the solenoid there is a rightangle T piece which has a hose coming of it. But the bottom connection has no hose connected to it....Is this normal??? Any help would be greatly appreciated reffer to my postsounds sick with it off but I dno I dont think the turbo will be happy Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 21d Gender: Male Location: SE Melbourne Posted 01/03/10 05:54 AM Share Posted 01/03/10 05:54 AM Im pretty sure once that hose is off the boost control no longer works and your turbo just spins freely with no limit. Easy way to blow it + throw a rod. anyway just came on here to say that instead of taking the battery and piping or whatever out you can just pull the hose off at the turbo side and spray the s**t down it. Did it today and now have another problem. My wheels keep spinning when I hit the throttle. Link to comment Share on other sites More sharing options...
mattyb Donating Members 1,097 Member For: 16y 5m 29d Gender: Male Location: Gold Coast, QLD Posted 01/03/10 09:57 AM Share Posted 01/03/10 09:57 AM CHECK OUT MY THREAD TITLED KNOCKING FROM MOTOR!Make sure all the hoses to the solenoid are connected, as dave (blueboost) cleared up for me, running 16psi, and not having this connected I was estimated to be pushing 24+psi at around 4000 - 4500 rpm...My new motor is due to arrive tomorrow. Food for thought. Maintenance on these vehicles is a MUST, but the care taken, and the knowledge required, is also a MUST. Cost me $3500 to $4000, maybe more, and my car has been off the road for 3 months trying to finance this.All because that little hose was NOT connected. Link to comment Share on other sites More sharing options...
louiseanddanny 10.5 @ 132MPH Donating Members 477 Member For: 16y 10m 18d Gender: Male Location: FALCON COUNTRY Posted 03/03/10 10:17 AM Share Posted 03/03/10 10:17 AM looking forward to be doing this cant believe I haven't done it yet!!! what product of nulon was it? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now