XRQTR Member 34 Member For: 19y 3m 6d Posted 03/01/07 05:11 AM Share Posted 03/01/07 05:11 AM I wouldn't be going straight for the full syn oils in at least your first change, go for a semi syn first change then decide from their.Depending on the intervals you choose to change your oil, obviously the more frequent the better, maybe do your next change at 5000km this way you can actually see what kind of state it is in after a short period. If the oil comes out relatively clean then go ahead with the full syn if you like but always check the oil visually at each change to see how much more wear it is getting each time, this will be a good indicator that a flush might be in order as well as possibly a thicker grade of oil as it gets on in the km's.Most important though, add some engine flush prior to your first oil change and drive it for maybe 100km, more if you can, drop the oil but use a regular oil for about another 100km this will ensure you clean the engine of any detergents used in the flush solution. For this you can use off the shelf Safeway if you like because it's not staying in the engine very long but only being used to flush any left over detergents. It's a good idea to do this because you don't want them in your new fresh top shelf oil as it can actually make the oil break down well before it should, this is why some people who only ever use top shelf oils still have bearing problems, flushing should be a 2 stage process.As for brands the best advice I or anyone else here can give I suppose is get the brand that you can afford and you know works for others.Good Luck Stef Link to comment Share on other sites More sharing options...
F6 RAPID Formerly Turbo6 Donating Members 2,332 Member For: 21y 11m 19d Location: North Brisbane Posted 03/01/07 06:13 AM Share Posted 03/01/07 06:13 AM I wouldn't be going straight for the full syn oils in at least your first change, go for a semi syn first change then decide from their.Good Luck Stef←Ummm, he has asked the question of a 75,000 km old car............ don't think he really cares about the first change. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 4m 6d Gender: Male Location: Melbourne, VIC Posted 03/01/07 08:19 AM Share Posted 03/01/07 08:19 AM Checked out the castrol edge...... $70... hmmmm a bit to rich for me and plus I need 2 of them... couldnt find Royal purple anywhere...There was a castrol edge for about $50 but that was 5w-40... it said on the bottle that the oil is suited for high performance 4 cylinder engines though.... hmmm. Im gettin the service done at Ultra Tune in Dandenong cause I've heard good things about them. Guess ill have to ask what oil they use ey.... Link to comment Share on other sites More sharing options...
XRQTR Member 34 Member For: 19y 3m 6d Posted 03/01/07 09:07 AM Share Posted 03/01/07 09:07 AM Ummm, he has asked the question of a 75,000 km old car............ don't think he really cares about the first change. ←Ummmm yeeeee, first oil change coming out of a full mineral based oil service history. Do you actually think they put anything better than the run of the mill oil in your T at the dealership unless you bring the bottle for them??The engine has been run on mineral based oils which use different detergents in the oils, the coating that has been left by the mineral oil can be stripped by the synthetic oil thereby causing damage. I'm not saying that it will happen but that it can, it all comes down to how care and maintain your vehicles, if you don't care then why worry about what oil you use, no point worrying about oil if you don't follow a proper preventative procedure.You all talk about thousands of dollars worth of modifications that you have done to your car, some even putting themselves in debt, and then tightarss it for an extra $50 when it comes to one of the most vital services on any engine. Link to comment Share on other sites More sharing options...
SAMSXR6T Member 685 Member For: 19y 10m 17d Gender: Male Location: CENTRAL COAST Posted 03/01/07 09:09 AM Share Posted 03/01/07 09:09 AM Castrol Edge 10W-60 . good stuff Link to comment Share on other sites More sharing options...
Evil F6 Donating Members 830 Member For: 18y 11m 18d Gender: Male Location: Sydney Posted 03/01/07 09:16 AM Share Posted 03/01/07 09:16 AM Sheesh, 75K is nothing on these motors if it's been looked after. I'd be using a full synthetic (0-10)W - 40. Don't forget this oil has the film strength of a mineral based 60 when hot, so I wouldn't go thicker unless you were in Rapid F6's shoes - big HP and hot climate. Link to comment Share on other sites More sharing options...
SavageF6 Donating Members 1,622 Member For: 20y 8m 8d Gender: Male Location: Sydney Posted 03/01/07 03:09 PM Share Posted 03/01/07 03:09 PM Do you actually think they put anything better than the run of the mill oil in your T at the dealership unless you bring the bottle for them??←Yep. Three Ford dealers that I've been to in the last 12 month have used Castrol Edge 0W-40 in fact. The one that I visited while still running the engine in, used Mobil semi-synth.But you're right, definately ask what will be going in, or better yet, bring your preferred choice of lube. Link to comment Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 4m 6d Gender: Male Location: Melbourne, VIC Posted 04/01/07 01:20 AM Share Posted 04/01/07 01:20 AM Decided to fork out the extra and got the Edge 0w-60..... Link to comment Share on other sites More sharing options...
Jordo Member 10 Member For: 17y 6m 3d Gender: Male Location: Canberra Posted 27/07/07 08:11 AM Share Posted 27/07/07 08:11 AM im glad you created this thred apac77. Im about to do my 75k service on my 04BA, ill take some advice in this thread and check out midas and some others (in canberra), will let you know the quoted price. Link to comment Share on other sites More sharing options...
alanb007 Donating Members 61 Member For: 20y 6m 20d Gender: Male Location: Miranda NSW Posted 27/07/07 08:46 AM Share Posted 27/07/07 08:46 AM I have just had the 75,000 km service as well.Mine came to just over $1100 dollars, but this included new rotors for the Premium brakes (obviously pads as well) By the time I got to to this distance, the rotors were really worn down, I thought the pads were supposed to wear out before the rotors???I know that I could have sourced and fitted the parts more cheaply by doing the work myself, but I don't have much time at the minute, so I paid the money.I am not complaining as I know what Ford charge, but just giving my experience of 75,000 km serviceFor your bill, I would expect to see some major bits getting replacedHope this helps Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now