Jump to content

Oil Testing.


blackwrx

Recommended Posts

  • Member
  • Member For: 19y 9m 4d

NOT DIAL UP FRIENDLY AS TAKES A LITTLE WHILE TO LOAD UP.

Came accross this on another web site and thought it may ba helpful when choosing oils for your car. It came as a surprise to me that the red line oil did not perform too well..

http://hanyanabanana.googlepages.com/dallasoilinfo

Edited by blackwrx
Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 2m
  • Gender: Male
  • Location: Perth

Im always a bit dubious about these types of test but seeing as how im running Royal Purple in my car and it did well in the test then this test must be a good one... :tosser: No real surprises though that the most expensive and most advertised oils arent always the best...

BCL what oil you run in your car or is that a Nizpro classified secret?

:spoton:

Link to comment
Share on other sites

  • Member
  • Member For: 18y 2m 20d
  • Gender: Male
  • Location: NSW

I've seen similar tests ran in a workshop, with the same results, Royal Purple is king.

In fact, in one test I saw, Royal P even out performed other synthetics with aditives, and as stated in this test, even without the oil bath, the RP perfromes better.

There was a case in the US where a 4WD running RP holed it's sump and still ran (without further damage) on the coatings stuck to the components.

I've used the stuff for years and although it is dearer per litre, it more than makes up for it in longevity. I can generally run RP for twice as long and it still comes put looking as fresh as it went in.

Link to comment
Share on other sites

  • Member
  • Member For: 18y 6m 10d
I've seen similar tests ran in a workshop, with the same results, Royal Purple is king.

In fact, in one test I saw, Royal P even out performed other synthetics with aditives, and as stated in this test, even without the oil bath, the RP perfromes better.

There was a case in the US where a 4WD running RP holed it's sump and still ran (without further damage) on the coatings stuck to the components.

I've used the stuff for years and although it is dearer per litre, it more than makes up for it in longevity.  I can generally run RP for twice as long and it still comes put looking as fresh as it went in.

how can the oil be as fresh as it first went in,and twice the change interval

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 2m
  • Gender: Male
  • Location: Perth

The manufacturers of royal purple recommend a 10000k's service interval with a filter change at 5000k my royal purple 5w30 has done aprox 5000k's and has minimal discolouration compared to the oils i've run in the past. Maybe not fresh as the day it was put in but certainly fresher than other oils i've used... :stirthepot:

Link to comment
Share on other sites

  • Donating Members
  • Member For: 19y 1m 5d

Has anyone managed to download this document? It seems this link "dallasoilinfo.doc" is inactive.

Can someone please upload this to this thread or PM me.. please...?

I'm currently using Mobil1 5W-50 on my XR6T BA MKII auto. I wonder if I should change? Any thoughts?

Thanks.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 19y 3d
  • Gender: Male
  • Location: Victoria
Has anyone managed to download this document?  It seems this link "dallasoilinfo.doc" is inactive. 

Can someone please upload this to this thread or PM me.. please...?

I'm currently using Mobil1 5W-50 on my XR6T BA MKII auto.  I wonder if I should change?  Any thoughts?

Thanks.

Yeah I can't get it to work either.

Link to comment
Share on other sites

  • Member
  • Member For: 19y 10m 27d

Managed to download it OK after a couple of attempts.

What they've done is measure film strength of cold oil. What relevance this has to oil performance in an engine, I'm not sure.

The interesting thing for me is that the semi-synthetics generally do better than the full synthetics. Is this because dino oil has better film strength, or is it the additive package?

Link to comment
Share on other sites

  • Donating Members
  • Member For: 20y 7m 5d
  • Gender: Male
  • Location: Sydney
I'll wait until they do the in-engine tests before taking any of these results into consideration.

What they've done is measure film strength of cold oil.  What relevance this has to oil performance in an engine, I'm not sure.

:blush:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'