senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 26d Gender: Male Location: SW Sydney Posted 06/10/08 03:11 AM Share Posted 06/10/08 03:11 AM Hey guys, i've just started the Federal Tyre group buy, so check it out in the Group Buy Section... Link to comment Share on other sites More sharing options...
xr0500 Donating Members 321 Member For: 18y 11m 1d Gender: Male Location: Hobart, TAS Posted 06/10/08 04:12 AM Share Posted 06/10/08 04:12 AM [quote name='RAP1D' post='745377' date='Oct 6 2008, 01:12 PM']I'll have a price up tomorow. I only sell flow matched sets of 6, which are matched to 1% of each other, rather than the typical 5% flow from the Ebay sellers. These give better tunabillity, which helps with idle quality and ecconemy.[/quote] A good price on these would be awesome!!! Im stock piling parts at the moment ready for future mods Waiting for Rapid to do a sale on high flow coolers too hint hint Link to comment Share on other sites More sharing options...
stockxr Banned 123 Member For: 16y 10m 11d Gender: Male Posted 08/10/08 11:48 AM Share Posted 08/10/08 11:48 AM hey all, how about nizpro dose a gruop buy on some injectors???????? looks like there are alot ppl who will jump at the op..... maybe who ever is interested put a post with there name and, if we get a decent number off ppl interested then talk to the crew at nizpro Link to comment Share on other sites More sharing options...
norrs Donating Members 448 Member For: 17y 4m 11d Gender: Male Location: Darwin Posted 08/10/08 02:09 PM Share Posted 08/10/08 02:09 PM [quote name='RAP1D' post='742680' date='Sep 30 2008, 10:21 PM']Oh, also I might be able to do a group buy on High Flow cats to suit standard exhausts... will be a cat & centre section replacement.[/quote] That's what I'm talking about. you can count me in. Link to comment Share on other sites More sharing options...
typhoon_freak Cryptic Clothing Company Donating Members 4,556 Member For: 16y 4m 23d Gender: Male Location: Brisvages, Capalaba Posted 08/10/08 08:03 PM Share Posted 08/10/08 08:03 PM what about intercooler with hot and cold side piping? i'm up for this soon... Link to comment Share on other sites More sharing options...
Ghosti NOT THERE!... THERE! Member 852 Member For: 16y 7m 10d Gender: Male Location: Melbourne Posted 09/10/08 01:26 AM Share Posted 09/10/08 01:26 AM [quote name='stockxr' post='746643' date='Oct 8 2008, 10:48 PM']hey all, how about nizpro dose a gruop buy on some injectors???????? looks like there are alot ppl who will jump at the op..... maybe who ever is interested put a post with there name and, if we get a decent number off ppl interested then talk to the crew at nizpro[/quote] Mate, RAP1D is already in the process of getting a price for a group buy of injectors. Any updates on this Chris? Link to comment Share on other sites More sharing options...
RAP1D Member Donating Members 3,739 Member For: 18y 6m 13d Gender: Male Location: Sydney NSW Posted 09/10/08 07:24 AM Share Posted 09/10/08 07:24 AM Well, I buy them from the states, and with the dollar as it is, they have gone up $55 au a set of 6. I was hoping to do them for a decent amount under $400, but its not going to happen. $400 is the price. My retail on my website is $475. Please note that these are flow matched to within 1% of each other, in a group of 6. Most sellers sell them at the factory 5%, as they buy them by the piece, not the set. I'd rather sell them matched, at a slightly higher price, than send them out unmatched, with the chance of tuning issues once installed. Link to comment Share on other sites More sharing options...
Ghosti NOT THERE!... THERE! Member 852 Member For: 16y 7m 10d Gender: Male Location: Melbourne Posted 09/10/08 09:13 AM Share Posted 09/10/08 09:13 AM I'll happily pay an extra 20 or 30 bucks for a more accurately flow matched set. Mainly because it seems like a small price to pay for the possibility of avoiding issues later. Cheapest I've seen a new +-5% set for is $370 and your price for these ones is saving us $75 off retail. Seems like a no-brainer. If it gets up and you start a thread, put me down for a set mate. Link to comment Share on other sites More sharing options...
stockxr Banned 123 Member For: 16y 10m 11d Gender: Male Posted 09/10/08 12:22 PM Share Posted 09/10/08 12:22 PM great!! sorry ppl, didnt no that this was on the go....... can i ask what thedifferance between yours and nizpros?? nizpro said that their injectors are better than boch because of the petrol flow on low throtel, how do these ones match up??? i keep harping on about nizpro because ive heard a lot of good things about them, and to me my ca is my baby so i dun wana do any thing to hurt her. Link to comment Share on other sites More sharing options...
straughsberry Donating Members 1,846 Member For: 17y 3m 15d Gender: Male Location: Broady, Melbourne Posted 09/10/08 12:47 PM Share Posted 09/10/08 12:47 PM I'm just throwing this out to see if there is interest. How about torque converters for the 4 speed? In the process of finding a converter for my built BTR, I've found someone who is helping me get the stall correct for my converter. He has fitted many to N/A's but not to a Barra Turbo as yet. So after a conversation today, he is willing to use my car as a test mule to get the desired 2800rpm stall at his cost and my time and inconvenience! I only have one car ATM. The first one was way off the mark at 3700rpm. I have a second converter being modified as we speak and I should have it fitted next week. If it's not right, we will try again until we get the desired 2800 rpm. With my car making a typical power level for our cars (350 rwkw), the stall should not deviate too much if you have a little less or little more power or slightly different tune characteristics. I know people are paying between $800 and $1200 depending on where you get them from. I'm not sure on the price yet but it will definitely be well under $800. Probably less than $600 I'd say, but don't quote me on that yet as I'm not sure what he has to do to get these to work for our turbo application. These are the mods done to the standard converter: - The turbine is bronzed - Outer stator race keyed to stator - Lock-up up seal is replaced with a high temp Viton seal - Needle bearing changed with a better bearing (not sure of type) - Plastic thrust washer changed for a bronze washer - Lock-up is retained - 12 month warranty Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now