masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 17d Gender: Male Location: WA, Perth Posted 07/05/14 12:14 AM Share Posted 07/05/14 12:14 AM +1 depending on price. $200 is wayyyyyy to Steep. Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,981 Member For: 11y 8m 22d Gender: Male Location: Frankston, 3199 Posted 07/05/14 12:28 AM Share Posted 07/05/14 12:28 AM I'd be in if reasonable - Saw the price of them, saw what they are and just shook my head 1 Link to comment Share on other sites More sharing options...
FGMKII Member 193 Member For: 10y 10m 5d Gender: Male Location: Western Sydney Posted 07/05/14 04:20 AM Share Posted 07/05/14 04:20 AM So what would be the best way to go about this? Contacting the likes of Plazmaman, if they were keen, would give us a discounted price but basically still be paying a lot for a bend, silicone bend, a reducer and some clamps. This was an idea of mine and no idea how to go about setting this up. I guess ideally, a member who has access to a shop and cost prices could do the best deal and still make a bit for their shop. If it costs the shop 50 in parts with clamps and could do say 10-20 for $65 that would be more realistic for us as the buyer, was just an example. This is of course assuming the bend is a straight forward 90 degree bend and not custom cut in the slightest way. Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 17d Gender: Male Location: WA, Perth Posted 07/05/14 07:46 AM Share Posted 07/05/14 07:46 AM I think the biggest issue is for everyone to agree on purchasing the same item. Personally I would prefer the process west delete as I already have process west gear in my car and would like it to match. I also like the finish of the product. 2 Link to comment Share on other sites More sharing options...
BGBOSS New Member 10 Member For: 10y 10m 23d Gender: Male Posted 07/05/14 10:19 AM Share Posted 07/05/14 10:19 AM From the pics I've seen, it's not quite a 90 degree bend.. but it is after all just a bend. If someone could figure out the bend angle and tube length that's half the job done Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 3m 10d Gender: Male Location: Adelaide Posted 07/05/14 12:59 PM Share Posted 07/05/14 12:59 PM (edited) if its so easy and you dont want to pay just go do it yourself and put your money and time in to the product. give me evidence that it will work and evidence that it will make power and I will buy one. I have a pw one in the boot ready to go in. specs please. :D Edited 07/05/14 01:00 PM by BiZkets 1 Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,981 Member For: 11y 8m 22d Gender: Male Location: Frankston, 3199 Posted 07/05/14 01:22 PM Share Posted 07/05/14 01:22 PM Never been any claim of a power increase had there? Only a noise increase? Doesn't affect intake or tune at all do they? Would buy one for shits and giggles if it wasn't over $100 Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 17d Gender: Male Location: WA, Perth Posted 07/05/14 02:26 PM Share Posted 07/05/14 02:26 PM I doubt we would ever get it too $100. I am sure that if someone contact Kev at PW and asked, he might be able to give a discount, if there are 10 ppl. Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,981 Member For: 11y 8m 22d Gender: Male Location: Frankston, 3199 Posted 07/05/14 02:31 PM Share Posted 07/05/14 02:31 PM (edited) If there's a reason to have one other than intake/spool noise I'd pay over $100 for one. edit: am not trying to be facetious or anything - am tipping that the 1 or 2 a month they sell, the price they charge is worth the effort they put in. One of those items that draws a premium because it's annoying and not part of the core business. Could well be a hell of a lot of margin for a decent batch order. Edited 07/05/14 02:38 PM by raband Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 17d Gender: Male Location: WA, Perth Posted 07/05/14 02:39 PM Share Posted 07/05/14 02:39 PM That is the only reason as far as I am aware. The stock pipe/cone does exactly that, reduce spool noise. Oh I just thought of a reason. Create more space and access to your turbo. :P 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now