ratter Member 6,793 Member For: 18y 5m 20d Gender: Male Location: @ my laptop Posted 14/10/13 11:33 AM Share Posted 14/10/13 11:33 AM I will check as time permits, but the last group buys took up quite a bit of time Link to comment Share on other sites More sharing options...
naldz006 Member 61 Member For: 12y 8m 4d Gender: Male Location: Mallee Posted 15/10/13 09:29 AM Share Posted 15/10/13 09:29 AM I'd be interested in a well fabricated catch can set up. Wouldn't necessarily have to be a group buy as I know they're not that expensive, but I'm surprised there's not a prefabricated 6t kit out there? . Will be fitting my pw cooler in the next couple of months before a tune and I'd like to get the catch can sorted before I give it a nice coat in oil to slow it down a bit. Was cleaning the throttle body the other day and saw a few pools of oil in the intake manifold. I'm sure my valve train and other components would like not having to deal with this. To my knowledge there aren't really any ready to go set ups out there yet? The supercheap auto option I see is popular but then you buy hoses and make a bracket etc. Fittings for the tip of the rocker cover.. Not exactly hard but not having easy access to tools or shops where I live at the moment then I'd be keen on a prefab kit Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 21d Gender: Male Location: NOR Perth Posted 15/10/13 11:19 AM Share Posted 15/10/13 11:19 AM +1 for above too Only seen rapids one for $350 but its out of stock according to website :/ And only other option is fleabay stuff and $50 is cheap but idk about the quality (but im sure theres ppl here who use them?)ill have to research more Also if gb on air intake does happen...lets go with chris @ rapids? Products are way cheaper than everyone and looks quality...but idk lol Valve springs? Nizpro exhaust systems? Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 7m 19d Gender: Male Location: Canning Vale, W.A Posted 15/10/13 11:59 AM Share Posted 15/10/13 11:59 AM (edited) His intake is good. Sounds like I drive a VL turbo though, if you're into that sorta thing. Edited 15/10/13 12:00 PM by turboboink Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 21d Gender: Male Location: NOR Perth Posted 15/10/13 12:09 PM Share Posted 15/10/13 12:09 PM Hahah yeah of coarse fully hektic dose zututu ;) Im sure if you change below 2500rpm it wouldn't be too loud? Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 7m 19d Gender: Male Location: Canning Vale, W.A Posted 15/10/13 11:18 PM Share Posted 15/10/13 11:18 PM 0.5 cover on 8psi sounded like a rattle snake 0.7 cover on 18psi sounds like a vl turbo hahaOf course. If I ran a BOV it wouldnt happen. But screw that!Under 2500 its still quiet noticeable but subtle at the same time.. Still turns heads.Intake + box is good, battery tray is sturdy however if youre running an aftermarket intercooler pipe kit you may have to jiggle a few things around to get it to all fit snug. It was a 2 man job for myself. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 5m 21d Gender: Male Location: NOR Perth Posted 16/10/13 02:36 AM Share Posted 16/10/13 02:36 AM ok cool.. thanks for that.....well I have the baby turbo and stock boost so mine should sound like a rattlesnake :) except prob not as loud as I plan to run the rapids cheapo bov venting to atmo so ill see how that sounds :) (and im prob gunna go the rapids replacement intercooler pipes + TB elbow + F6 cooler and that works with plazmaman, rapids and I think PW turbo side + battery kits) so should get a decent induction note then Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 9d Gender: Male Location: SW Sydney Posted 16/10/13 11:54 PM Share Posted 16/10/13 11:54 PM Hey Guys, Saw a couple of posts about DBA T3 discs. We don't normally do brakes but we have an account with DBA and i could look at doing a group buy. I'm thinking a set of 4 T3 rotors for $850 plus freight - this is for the 42107S and 42108S part numbers. Give me some feedback on what part numbers you would need and i can figure out pricing - remember, i do not specialise in brakes so you will have to tell me what you need! Thinking ten people for good pricing... Link to comment Share on other sites More sharing options...
Barnesy Donating Members 210 Member For: 15y 9m 26d Gender: Male Location: Brisbane Posted 17/10/13 12:08 AM Share Posted 17/10/13 12:08 AM I think T3's might be overkill for the rears, perhaps front T3's (DBA42107S) and rear t2's (DBA505S). Can you get Ferodo DS Performance brake pads: DB1473DS front XR6T DB1376DS suit rear Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 9d Gender: Male Location: SW Sydney Posted 17/10/13 12:29 AM Share Posted 17/10/13 12:29 AM I'm only doing the Discs mate - as mentioned, i am not a brake supplier, we simply have an account with DBA 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now