XITMNT Member 18 Member For: 19y 6m 20d Posted 10/12/06 02:44 PM Share Posted 10/12/06 02:44 PM The standard fuel rail does have a return to the tank, but feed line and return line are both too small for what we are needing to achieve so we needed to replace the factory fuel rail to increase the size of lines and a better fuel pressure reg. Climax Airbrushing did the Falcon on the rocker cover, if you have seen any of their other work at any of the car shows they are amazing from little things to whole cars. They painted the rocker cover as a gift for me so I dont know how much it would cost.As far as the mechanical work on the car, it has all bar trans and suspension been done by G-Tech Performance in Campbellfield VIC, it is my car and not a business car but my brother does own G-Tech so therefore I get a resonable deal on work done price wise.If you ever wish to see the car in the flesh or want to go for a ride to see how it is still very driveable it is at G-Tech most of the time.Thankyou for the compliments on the cars looks!! Link to comment Share on other sites More sharing options...
Ford Grunt Member 159 Member For: 21y 10m 15d Location: Newcastle Posted 14/12/06 03:06 AM Share Posted 14/12/06 03:06 AM Nice ride XITMNT. Was a good read, was amazed at how much power at low boost/RPM. Good luck with it mate Cheers,Ford Grunt Link to comment Share on other sites More sharing options...
XITMNT Member 18 Member For: 19y 6m 20d Posted 15/12/06 03:46 AM Share Posted 15/12/06 03:46 AM I was amazed too, was very pleased by how well evrything worked together. Link to comment Share on other sites More sharing options...
INFLYT Donating Members 784 Member For: 18y 5m 10d Gender: Male Location: N.S.W, Sydney Posted 18/12/06 06:55 AM Share Posted 18/12/06 06:55 AM Why are you guy's building a new engine for it man?The current one seem's to have made tonnes of power with plenty of potential. Link to comment Share on other sites More sharing options...
XITMNT Member 18 Member For: 19y 6m 20d Posted 18/12/06 03:37 PM Share Posted 18/12/06 03:37 PM (edited) This engine was never built as a serious one, it was a bit of test and see. It is fine as a good strong street engine but the rods and crank are not strong enough to rev to 8500 - 9000 rpm, where the new one will. the head on this engine has just been cleaned up where as the new one was properly flowed on a bench, we have also added a few other things to help support the billet crank and hold evrything together. I suppose I want to see what the full potential of a BA engine is when everything is done and you dont have to worry about things staying together.By the way will be selling this engine soon if anyone is interested!! Edited 05/01/09 09:17 PM by senna_T removed quote Link to comment Share on other sites More sharing options...
spine Donating Members 642 Member For: 18y 8m 2d Gender: Male Location: Footscrayastan Posted 18/12/06 07:28 PM Share Posted 18/12/06 07:28 PM The standard fuel rail does have a return to the tank, but feed line and return line are both too small for what we are needing to achieve so we needed to replace the factory fuel rail to increase the size of lines and a better fuel pressure reg. Climax Airbrushing did the Falcon on the rocker cover, if you have seen any of their other work at any of the car shows they are amazing from little things to whole cars. They painted the rocker cover as a gift for me so I dont know how much it would cost.As far as the mechanical work on the car, it has all bar trans and suspension been done by G-Tech Performance in Campbellfield VIC, it is my car and not a business car but my brother does own G-Tech so therefore I get a resonable deal on work done price wise.If you ever wish to see the car in the flesh or want to go for a ride to see how it is still very driveable it is at G-Tech most of the time.Thankyou for the compliments on the cars looks!!← Could I get some details on Where abouts in Campbellfield are they? , Link to comment Share on other sites More sharing options...
XR-ENVI Member 72 Member For: 19y 6m 15d Location: GEELONG Posted 20/12/06 06:53 AM Share Posted 20/12/06 06:53 AM Could I get some details on Where abouts in Campbellfield are they? ,Hey thereI see you were after details of GTECH performancethey are at1/39 Foden Ave campbellfield9305 2888they can definatley do some good work on the Xr6 Turbos Link to comment Share on other sites More sharing options...
timeout Member 7 Member For: 17y 6m Posted 25/02/08 03:26 AM Share Posted 25/02/08 03:26 AM Any news on how this car is coming along, or any other cars coming out of there work shop??? Link to comment Share on other sites More sharing options...
qwigybo Member 288 Member For: 18y 7m 17d Location: bendigo home of SFA Posted 02/03/08 02:04 AM Share Posted 02/03/08 02:04 AM what he said Link to comment Share on other sites More sharing options...
XITMNT Member 18 Member For: 19y 6m 20d Posted 28/03/08 10:40 AM Share Posted 28/03/08 10:40 AM Hi guy's have not had chance to get online for ages the car is coming along well, just got a little sideracked with the restoration of my XA GT. The 9" is in and the suspension is in and the cage is being bult at the moment, engine is finished so I imagine it will be running around May/June. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now