Air Fuel Ratio Metre

[mark61]

Hi

Just bought an Autometer air fuel ratio gauge in the cobalt range and was just wondering if any one else had one fitted and if I need any thing else to hook it up. Got it as a mate for my boost gauge to go in mis_ ally pod gauge. Should all be here this weekend.

[driftpig01]

To wire it up you will need 12v acc, earth and signal wire, just splice into the grey wire which turns into the black wire after the connector of the sensor on the turbo dump pipe. To get your signal wire into the cabin unscrew your drivers side inner guard and feed the wire thru the same hole as the bonnet release cable goes thru. Just make sure you splice the correct grey wire yes there is two on the sensor. You will have a mobil disco before your know it.

Do a search there is alot of info available.

Edited 16/11/06 12:04 PM by driftpig01

[mark61]

Thanks driftpig will do

[BA_XR6Turbo_Ute]

do these guages or any other brand AFR guage for that matter give accurate readings?

cheers

[mark61]

The gauge makers say that they are only an indication.

To many variations maybe?

[Adam]

They are just a display of 2 or3 colors.

I'd imagine it would drive you crazy in closed loop.

[1dar3u]

a very annoying gauge, dont mount it anywere near the same height as your eyes.

[cobrav8]

I Put a switch on mine - and it is switched off most of the time.