Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 30d Gender: Male Location: Perth Posted 12/12/06 01:17 PM Share Posted 12/12/06 01:17 PM Hey AL i you need a hand you know my number...i specialise in pulling stuff apart in the shortest possible time...you dont want to reuse any of the old bits do you..? Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 21y 10m 30d Gender: Male Location: Perth, WA Posted 12/12/06 01:19 PM Author Share Posted 12/12/06 01:19 PM Hey AL I you need a hand you know my number...I specialise in pulling stuff apart in the shortest possible time...you dont want to reuse any of the old bits do you..? ←Who's AL? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 30d Gender: Male Location: Perth Posted 12/12/06 01:21 PM Share Posted 12/12/06 01:21 PM You know ALLAN i would have though with the number of years you have spent in Australia your Denglish would be better than that by now.... Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 21y 10m 30d Gender: Male Location: Perth, WA Posted 12/12/06 01:26 PM Author Share Posted 12/12/06 01:26 PM No worries LUKE, Al, Allan whatever Well if you are keen on getting your hands dirty (thinks to himself for a second, and realise that LUKE gets his hands dirty pretty much every day), but anyway, might take yo up on the offer, as I am getting a bit tight for time to do what I had hoped to achieve before Christmas Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 30d Gender: Male Location: Perth Posted 12/12/06 01:47 PM Share Posted 12/12/06 01:47 PM No worries Allan. im pretty busy the rest of this week and this w/end (helping the outlaws move house) but im sure i could spare a couple of nights next week..seeing as how its Christmas and all.... Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 21y 10m 30d Gender: Male Location: Perth, WA Posted 21/12/06 02:49 PM Author Share Posted 21/12/06 02:49 PM The project have started Today I pulled the 4 speed trans out of my car, and began making the changes required to the engine, such as re-arranged water piping and hoses to have both the FPV oil cooler and the ZF trans cooler connected to the engine cooling system, also removed the trans oil cooler lines, and fitted the 2nd knock sensor.I have had to make a custom bracket for the trans cooler, as a BA does not have the required mounting holes in the sump for the original trans cooler bracket, but as there are spare holes in the block just above where it fits, this was not too difficult.Tomorrow I have to fit the BF engine wiring harness, after modifying it to fit the Nizpro kit, and then hopefully there will also be time to get the ZF fitted to the car.A bit of work, but smooth sailing so far Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 21y 11m 5d Location: nowhere in particular Posted 21/12/06 08:25 PM Share Posted 21/12/06 08:25 PM Good luck with it Ninka! I will be reading about your progress with much interest. Did you read the recent thread where Julian (Buffoon) tried to fit APS exhaust from his old BA Typhoon to his new BF 'Phoon - said the floorpan was different and it wouldn't fit? Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 21y 10m 30d Gender: Male Location: Perth, WA Posted 21/12/06 09:34 PM Author Share Posted 21/12/06 09:34 PM (edited) Good luck with it Ninka! I will be reading about your progress with much interest. Did you read the recent thread where Julian (Buffoon) tried to fit APS exhaust from his old BA Typhoon to his new BF 'Phoon - said the floorpan was different and it wouldn't fit?←I did read that thread, but I do not see any difference from the quick look I have had on BF's so far, and in fact, Simon from Xtreme Ford Tuning confirmed that he is fitting the same exhausts to the BF as he is to the BA, and have had no problems I really don't believe that Ford would change the most expensive piece of sheet metal in the car, just to do an upgrade from BA to BF.There are differences on some of the bracing and the tail shaft centre bearing is different, but all things which are managable so far Edited 21/12/06 09:34 PM by Ninka Link to comment Share on other sites More sharing options...
Xtreme F6 Team Xtreme Donating Members 1,680 Member For: 19y 9m 14d Gender: Male Location: Perth Posted 21/12/06 11:07 PM Share Posted 21/12/06 11:07 PM You know ALLAN I would have though with the number of years you have spent in Australia your Denglish would be better than that by now.... ←nah mate, he still thinks poost is as good as boost sorry al, couldnt help myself Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 21y 10m 30d Gender: Male Location: Perth, WA Posted 22/12/06 01:05 AM Author Share Posted 22/12/06 01:05 AM HEY - Always happy to entertain you guys Så hør nu ordentligt efter I timen, eller I får smæk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now