Paradoxx Colossal Member Member 5,049 Member For: 20y 3m 4d Gender: Male Location: Perth, WA Posted 16/11/06 04:46 AM Share Posted 16/11/06 04:46 AM It's all a learning process, and it is people like Al that everyone else benefits from. Like a tuner who tinkers with the PCM, al has tried almost every conceivable modification available over the last few years, and a lot have already benefited from his "R&D" so to speak.If the ZF fits in the gap, then I reckon there will be a few people on this forum to take his lead!If it doesnt fit, nothing a little "massaging" can't fix Whats the difference between a BF block with a 4sp auto and a BF Block with a 6sp auto? From what I understand Al currently has a BF bottom end yes? Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 2d Gender: Male Location: @ my laptop Posted 16/11/06 08:42 AM Share Posted 16/11/06 08:42 AM It's all a learning process, and it is people like Al that everyone else benefits from. Like a tuner who tinkers with the PCM, al has tried almost every conceivable modification available over the last few years, and a lot have already benefited from his "R&D" so to speak.If the ZF fits in the gap, then I reckon there will be a few people on this forum to take his lead!If it doesnt fit, nothing a little "massaging" can't fix Whats the difference between a BF block with a 4sp auto and a BF Block with a 6sp auto? From what I understand Al currently has a BF bottom end yes?←I've heard the trans tunnel is different on the BF's to accomodate the 6 speed, but I can't imagine a new floor being remade on really just a model upgrade which is what the BF was.Good luck and keep us informed Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 21y 11m 5d Gender: Male Location: Perth, WA Posted 16/11/06 08:46 AM Author Share Posted 16/11/06 08:46 AM I've heard the trans tunnel is different on the BF's to accomodate the 6 speed, but I can't imagine a new floor being remade on really just a model upgrade which is what the BF was.Good luck and keep us informed←I agree, and if you look inside the car, a larger tunnel would mean the centre console would have to be different as well, and from what I have been able to see, the BF's look identical to the BA'sTime will tell Link to comment Share on other sites More sharing options...
Buf-Phoon loitering with intent Lifetime Members 13,318 Member For: 21y 3m 10d Gender: Male Location: Zombie Birdhouse Posted 16/11/06 09:10 AM Share Posted 16/11/06 09:10 AM Good stuff Whiskas :spoton:Like many others, I will watch with interest......Got to love the pioneering spirit of you guys. At the end of the day we all learn so much Link to comment Share on other sites More sharing options...
2MUCHKW Member 350 Member For: 18y 7m 9d Posted 16/11/06 09:51 AM Share Posted 16/11/06 09:51 AM I've heard the trans tunnel is different on the BF's to accomodate the 6 speed, but I can't imagine a new floor being remade on really just a model upgrade which is what the BF was.Good luck and keep us informed←I agree, and if you look inside the car, a larger tunnel would mean the centre console would have to be different as well, and from what I have been able to see, the BF's look identical to the BA'sTime will tell ←Brave man,Might be very wise to purchase the whole BF Tornado from FGS cause your gonna need allot of bits besides just the box ... then sell off whats left!!!!Try-BF ZF Tailshaft-BF ZF Crossmember-BF ZF Trans cooler pipe work assembly from heater box-BF PCM-BF Complete engine/trans wiring harness-BF ZF Throttle kickdown switch-BF Throttle pedal assembly-BF ZF shifter assembly & surround -AND upon asking Simon @ Nizpro regarding a ZF auto BA upgrade he stated the BF PCM requires a BF motor TOO for it requires the revised knock sensors and something else to function properly Dont let all this phase you though coz I've upgraded to a BF ZF speed!!!See pic below as to how I did it Link to comment Share on other sites More sharing options...
Kaine HgAg soldier Member 253 Member For: 21y 4m 16d Gender: Male Posted 16/11/06 10:11 AM Share Posted 16/11/06 10:11 AM where theres a will, theres a way.. Good luck Al, I'm sure u will keep us up to date with your progress. Kaine Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 4m 21d Gender: Male Location: OZ Posted 16/11/06 10:33 AM Share Posted 16/11/06 10:33 AM If he doesnt try, he'll get bored and do something else anyway so why not attempt the 6sp!!! My mate in Qld has 2 t's a 6sp auto and a 4sp auto and believe it or not he prefers the 4sp... don't ask me why!!Should keep you entertained anyway.... oh and Al will find a way. Link to comment Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 21y 11m 5d Gender: Male Location: Perth, WA Posted 16/11/06 10:35 AM Author Share Posted 16/11/06 10:35 AM (edited) Brave man,Might be very wise to purchase the whole BF Tornado from FGS cause your gonna need allot of bits besides just the box ... then sell off whats left!!!!Try-BF ZF Tailshaft - Easy as the tailshaft can be bought in bits and pieces-BF ZF Crossmember - Got it-BF ZF Trans cooler pipe work assembly from heater box - Got it-BF PCM - New from Ford-BF Complete engine/trans wiring harness - New from Ford-BF ZF Throttle kickdown switch - TBD-BF Throttle pedal assembly TBD-BF ZF shifter assembly & surround - Got it-AND upon asking Simon @ Nizpro regarding a ZF auto BA upgrade he stated the BF PCM requires a BF motor TOO for it requires the revised knock sensors and something else to function properly Not too difficult I thinkDont let all this phase you though coz I've upgraded to a BF ZF speed!!!See pic below as to how I did it ←Congratulations on your ZF 6 Speed, do you want to compare cost and depriciation He who laughs last, laughs best Edited 16/11/06 10:41 AM by Ninka Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 19y 11m 13d Gender: Male Location: Strapped in and holding on Posted 16/11/06 10:38 AM Share Posted 16/11/06 10:38 AM May the force(d induction ) be with you....................................................... Link to comment Share on other sites More sharing options...
Guest newl Guests Posted 16/11/06 10:43 AM Share Posted 16/11/06 10:43 AM Al, you my friend, are insane. Watching you go through these motions with your T has been enjoyable and I'm sure that we'll enjoy this next stage of the journey. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now