Jump to content

Carputer For Sale


Panda

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

  • Seriously Flukey Member
  • Donating Members
  • Member For: 20y 9m 4d
  • Gender: Male
  • Location: Melbourne
OK.. SO lets say the following

In car PC

satnav

dvd

internet

cordless mouse

Through my own lcd

easy to connect (with instructions)

All other software installed by me

$$$$$

:stirthepot:

Link to comment
Share on other sites

  • Member
  • Member For: 20y 2m 13d
  • Location: Sutherland Shire, Sydney

If your gonna use your own LCD just get one with a touchscreen built in then you don't need the mouse.

You can fit a 7" screen in nicely where the tissue box holder is. My friend has done it and I also intend to...

Chris :spoton:

Link to comment
Share on other sites

  • Member
  • Member For: 20y 8m 12d
  • Gender: Male
  • Location: Gladstone, QLD
Heat isn't a problem, have you ever seen a P4 notebook?  the small footprint computers run those processors fine. 

If you are worried about the heat in a full sized pc we can always supply you with a bigger heatsink...

What is really important is to match the hardware with the application. We are not talking about gaming or video editing here. The P4 is simply not needed for this application.

It's was hard to get my head around it as well when I was researching the carputer setup because I am used to thinking 'bigger is better'. For this application bigger is not better, it is merely hotter, more expensive and outright overkill.

Panda

Link to comment
Share on other sites

  • Member
  • Member For: 20y 8m 12d
  • Gender: Male
  • Location: Gladstone, QLD
In car PC

satnav

dvd

internet

cordless mouse

Through my own lcd

easy to connect (with instructions)

All other software installed by me

If I can get the components cheaper than mentioned in the first post, I will pass that saving on to you. But as it stands

Jaycar 250W PSU - $120

Wiring / Plugs - $75

Case - $50

Cooling Fan 1 x 12cm $20

Motherboard $75

Processor P3 733 $50

RAM 256MB PC133 $75

Hard Drive 80GB IDE $100

GPS Receiver $125

DVD Player $100 (assuming it is mounted in the case)

Wireless Network D-Link $100 + for bigger antenna

Cordless Mouse $75

AGP Video Card $75 (this is a standard Video Card, not the Arcade VGA Card needed to connect to the factory ICC in BA-BF)

Again, if I can get the parts cheaper, the price will drop. Easy to connect, you will have to run a power cable from your battery to the boot and plug that to the PSU. You didn't mention how you will connect the sound to your car, nor what type of LCD you have (VGA input I assume)

Panda

Link to comment
Share on other sites

  • Member
  • Member For: 20y 8m 12d
  • Gender: Male
  • Location: Gladstone, QLD
You just jumped in Panda's thread and started selling stuff....

Why didnt you start your own thread.....??

I am still interested in the system Panda has..........

If PozzE has a better solution / package / price I have no objections, like I said this is just a hobby

Panda

Link to comment
Share on other sites

  • Donating Members
  • Member For: 19y 4m 14d
  • Gender: Male
  • Location: Melb

Better MB to use would be one of the VIA mini boards.. got a C3 1.3ghz procesor. more than enough power. has vga out, svideo out, and video out.. has onboard sound and lan, you cant use the arcadevga, but you can get a convertor box to convert 32khz signal to 15khz for around $90.. better than a $150 Arcade Vga card (it wont plug into the via board anyways)..

Oh, and highly recommend a Laptop hdd,. not a normal 3.5" hdd. they aint designed for mobile environments, and every car pc I've seen installed with the 3.5" have failed.. Only a matter of time..

and, best solution would be a touchscreen membrane over the original ford ICC unit.. I have done it. but its a pain in the arse...

d

Link to comment
Share on other sites

  • Member
  • Member For: 20y 8m 12d
  • Gender: Male
  • Location: Gladstone, QLD
For a 16.5x16.5x5.1 "Tiny PC" with the following specs

Intel Mobile Celeron M 370 (1.5 GHz), 512MB DDR2 RAM, 40GB HDD, Slot-in Super-Multi DVD Burner, Genuine MS Windows XP Home

Our normal price for this PC is $999 but for forum members we can drop this down to $900

If your after a "Micro PC" (larger than the Tiny PC but still alot smaller than a std PC) they are around $200 - $250 cheaper depending on the specs your after

Do these systems have an AGP slot?

Without an AGP slot (assuming you want to connect to the factory ICC) you will have to buy a converter similar to this About $300 I believe. If you are not running to the factory ICC, you will have to buy an LCD / TFT screen. Price varies on these but it should be between $300 and $400, I haven't really researched this because I was always planning on using the factory ICC.

Panda

Link to comment
Share on other sites

  • Member
  • Member For: 20y 8m 12d
  • Gender: Male
  • Location: Gladstone, QLD
but you can get a convertor box to convert 32khz signal to 15khz for around $90.. better than a $150 Arcade Vga card (it wont plug into the via board anyways)..
Hey, good find. Any more info on this?

Better than the $300 converter box I mentioned in the previous post.

Panda

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'