DougM Member 22 Member For: 18y 5m 28d Posted 31/08/06 01:18 AM Share Posted 31/08/06 01:18 AM Hi guys.I went to Eastern creek last night for the first time and ran my BA xr6t auto. The only mods I have are the F6 CAI and a custom tune giving me 250 rwkw....My best time was a 13.44 at 170.4km/h. My 60' was 2.7....I was very happy with that as I've never been on a drag strip before....After chatting to some other XR6T owners there they said that with 250rwkw I should have been much faster than that....Would that be the case??? There were a few others in the high 12's claiming similar power and mods to mine...Anyway, I'm going to the C&V dyno day to compare my car to others....Cheers.Doug. Link to comment Share on other sites More sharing options...
Paradoxx Colossal Member Member 5,049 Member For: 20y 3m 5d Gender: Male Location: Perth, WA Posted 31/08/06 01:25 AM Share Posted 31/08/06 01:25 AM Nah mate that's a bloody good time for 250rw... get that 60' down and it will be even quicker... practice practice practice!! How were your launches? Stalling up the auto? Link to comment Share on other sites More sharing options...
DougM Member 22 Member For: 18y 5m 28d Posted 31/08/06 01:42 AM Author Share Posted 31/08/06 01:42 AM Yes I was stalling it up and I was getting some wheelspin off the mark. Even when I dropped the tyre pressure down to 16psi.....I was just curious because another car in the high 12's had similar power but was much quicker. Link to comment Share on other sites More sharing options...
SAMSXR6T Member 685 Member For: 19y 9m 19d Gender: Male Location: CENTRAL COAST Posted 31/08/06 01:50 AM Share Posted 31/08/06 01:50 AM if you can get your 60ft down you will be laughing. Link to comment Share on other sites More sharing options...
Paradoxx Colossal Member Member 5,049 Member For: 20y 3m 5d Gender: Male Location: Perth, WA Posted 31/08/06 01:53 AM Share Posted 31/08/06 01:53 AM The wheelspin will account for the slower 60' time... 16psi seems a bit low to me. I have had success with about 24psi... got 2.1 60" in a manual. There are a few things you could look at though... how did the power feel? If it seemed lacking in top end you might have issues with valve springs. If it is surging you might have fuel supply issues... but judging by your 60' time I would say it's your take off. Warm the tyres a little bit before the line, give 24psi a go and see if it gets better. Still gotta be happy with a 13.4!! Your terminal speed is good so u will have a bit of headroom there. Link to comment Share on other sites More sharing options...
turbotom Team Bute Donating Members 1,550 Member For: 21y 4m 14d Gender: Male Location: Adelaide Posted 31/08/06 01:55 AM Share Posted 31/08/06 01:55 AM Get your 60 foot time down to around 2.1 ~2.2 seconds ...... with practice even with stock rubber you should achieve this.There's half a second gain right there which will put you into the high 12's with your current power output. tom Link to comment Share on other sites More sharing options...
DougM Member 22 Member For: 18y 5m 28d Posted 31/08/06 02:43 AM Author Share Posted 31/08/06 02:43 AM I misprinted my 60' time. It was 2.17!! Link to comment Share on other sites More sharing options...
Paradoxx Colossal Member Member 5,049 Member For: 20y 3m 5d Gender: Male Location: Perth, WA Posted 31/08/06 02:47 AM Share Posted 31/08/06 02:47 AM Oh well then u are pretty close to the money mate, well done Link to comment Share on other sites More sharing options...
PumpedUp Member 90 Member For: 18y 4m 15d Location: Mehico Posted 31/08/06 02:54 AM Share Posted 31/08/06 02:54 AM (edited) I misprinted my 60' time. It was 2.17!!←I was about to say, your 60' time seemed a little too high. Now your ET seems a little too low. Practice may not be the problem since you could only really gain .2 - .4 with a better 60' time, which(IMHO) is already pretty good. However, you may just sneak in to the high 12 sec, with a better launch, although you may need MT to do it. Edited 31/08/06 02:57 AM by PumpedUp Link to comment Share on other sites More sharing options...
Goldbullet Member 883 Member For: 19y 8m 5d Location: Frankston Posted 31/08/06 03:04 AM Share Posted 31/08/06 03:04 AM With MT's you will be running high 12's run your MT's at around 22 to 20 psi.Dave. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now