Henry Member 180 Member For: 21y 10m 18d Gender: Not Telling Posted 28/10/03 01:38 AM Share Posted 28/10/03 01:38 AM Thanx TurbomaxWhat was your rwkw before the mod? Link to comment Share on other sites More sharing options...
OwnaXR6T Member 1,519 Member For: 22y 24d Location: Sydney Australia Posted 28/10/03 07:45 AM Share Posted 28/10/03 07:45 AM getting the aps phase 2 kit fitted next week I think. can't wait!! Link to comment Share on other sites More sharing options...
TURBO4LT Member 1,533 Member For: 21y 4m 5d Gender: Male Location: NSW Posted 28/10/03 08:44 AM Share Posted 28/10/03 08:44 AM ownaxr6turboAny idea what that kits worth? Cheers Link to comment Share on other sites More sharing options...
Guest Turbomax Guests Posted 29/10/03 12:12 AM Share Posted 29/10/03 12:12 AM From memory it was 195rwkw with the Herrod performance exhaust fitted. I don't know what it was as standard, but Rob Herrod said the exhaust was good for around 14rwkw. I'm overseas at the moment and the dyno sheet is back home, so I can confirm it next week when I return (geez I miss the "T"!)The limitation on power is supposedly the fuel system, and 229rwkw is safe and reliable with the stock fuel system. Suits me too as it feels really strong across the range and I have peace of mind as well. Using the performance exhaust has probably enabled lower boost to achieve good power levels, hence less stress and more efficiency. Arguably you could achieve the same power without the exhaust but would just need more boost to do so.Hope this helps. Cost of APS Stage 1 was $1690 drive in drive out in Canberra. Ming Automotive did an excellent job for those in the area. Link to comment Share on other sites More sharing options...
OwnaXR6T Member 1,519 Member For: 22y 24d Location: Sydney Australia Posted 29/10/03 12:52 AM Share Posted 29/10/03 12:52 AM 5500 Link to comment Share on other sites More sharing options...
bez Member 92 Member For: 21y 6m 23d Location: Brisbane Posted 29/10/03 01:01 AM Share Posted 29/10/03 01:01 AM CDM.. not a company just yet,I've been playing round with the ford 4.0lt sohc motors for 4 years and I've just started to develop new turbo manifolds and inlet plenums, rocker covers, intercoolers, sohc cylinder heads that flow 425hp now, cams for the sohc. all the twin cam stuff will come as the price of the twin cam head is still far to high for someone still "just playing in his backyard"though with this new block/ head we wil be setting up a business and gearing up for production.ultimate goal..... help make some of the fastest 6 cylinders in the world.I hope to hit 8's with this block and head combo (turbo'd of coarse) in the front of a drag spec ea falcon soon enuf.hell, I got the power from a sohc i6 to pull a 1400kg ea down the quter in a 9.5 sec pass atm, just the manual and circut spec suspension wikll not help quater mile times.. bugger!!oh well back to it.cheers.joe. Hey Joe, any pics of what you've been doing, cause it sounds falcon unbelievable. Link to comment Share on other sites More sharing options...
cuspub Greg Brindley Member 97 Member For: 21y 4m 2d Location: Melbourne Posted 31/10/03 08:43 PM Share Posted 31/10/03 08:43 PM Turbomax, Nizpro's Ute which is running their 290rwkw Stage 2 package, runs the stock fuel pump and lines, but with higher flowing injectors. The engine is making over 450 horsepower at the flywheel and the factory fuel pump has been tested to happily deliver enough fuel for 500hp (373 kW), so anyone who suggests that an additional fuel pump or rising rate regulator is required for anything up to or slightly in excess of these figures is simply looking to sell something that isn't needed.Also as a matter of interest, the same vehicle delivers factory 'cruise' fuel consumption figures of 8.2 litres per hundred. Link to comment Share on other sites More sharing options...
ktford FORD FORD FORD Donating Members 9,390 Member For: 21y 9m 6d Gender: Male Location: Victoria Point In Brissy's eastern side Posted 31/10/03 09:08 PM Share Posted 31/10/03 09:08 PM What I'm interested in is an honest figure of Real World Horsepower figure achievable from our cars using bigger pump, injectors, better intake & of course some one's ECU to increase boost. This I am interested in knowing as I may go down this line, but I don't want the exhaust touched at all. I guess how much can be made through the stock system is my question. I'm sure I'm not the only who's been told 350kw can be made through it, but has anyone done it & not just in your head.Scotty Link to comment Share on other sites More sharing options...
Guest sven Guests Posted 31/10/03 10:26 PM Share Posted 31/10/03 10:26 PM I spoke to FPV in Sydney in regard to modifications, basically I think my vehicle is a bit slow from a standing start....I.e. 'Turbo Lag' Thinking OK well these are guys from FPV are the ones who do the work when the XR6 comes up from the factory in Victoria. Rather than go through some backyard performance joint... Anyway suprisingly when I asked the question about what mods I could make without compromising the warranty there was quite a bit of 'umming and arrring' (and this is from FPV!!!?)No one seems to want to stick their neck out... He did mention the Herrod exhaust system though for around $2500... but as someone else said whats the point of that without the chip, except for a meatier sound???? So my dilema continues, " To Chip or Not to Chip"Sven Link to comment Share on other sites More sharing options...
ktford FORD FORD FORD Donating Members 9,390 Member For: 21y 9m 6d Gender: Male Location: Victoria Point In Brissy's eastern side Posted 31/10/03 11:34 PM Share Posted 31/10/03 11:34 PM Hey sven,I'd like your next post to read"I've chipped," trust a real estate agent, you'll not regret it!!!!!!!!Scotty Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now