BLK-747 Member 21 Member For: 18y 8m 21d Location: IN TOWN Posted 29/07/06 01:05 PM Share Posted 29/07/06 01:05 PM Hey guys Well tomorro me and dad are gonna change the fuel filter and just wondering if anyone could give us a bit of a step by step guide on the best way of doing thisif you got pics that would be great but some infomation would be nice.thank guysRob Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/ Share on other sites More sharing options...
rboksic Donating Members 514 Member For: 20y 11m 21d Posted 29/07/06 10:50 PM Share Posted 29/07/06 10:50 PM jack the car up.under front passangers side is the filter.unscrew old unit 14 or 15 mm spanner #### there will be some fuel still under pressure in the line.screw in new one5 minutes Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-414399 Share on other sites More sharing options...
Goobz Member 746 Member For: 20y 6m 8d Location: Sutherland Shire, Sydney Posted 29/07/06 10:54 PM Share Posted 29/07/06 10:54 PM Yeah easy job. You will spill a little fuel but nothing to about...Chris Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-414401 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,331 Member For: 19y 6m 27d Gender: Male Location: Perth Posted 29/07/06 10:55 PM Share Posted 29/07/06 10:55 PM Are you able to remove the fuel pump fuse and crank the car till the fuel pressure is gone on these cars.? Gotta be better than an eyeball full of fuel.... Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-414402 Share on other sites More sharing options...
Ninka Donating Members 1,850 Member For: 22y 3m 27d Gender: Male Location: Perth, WA Posted 29/07/06 11:23 PM Share Posted 29/07/06 11:23 PM Are you able to remove the fuel pump fuse and crank the car till the fuel pressure is gone on these cars.? Gotta be better than an eyeball full of fuel.... ←You can remove the fuel relay in the fuse box in the engine bay quite easily, and I can't see why you couldnt start the engine and run it until fuel pressure was gone, this should only take a few seconds, and then there would be less fuel spilling. Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-414409 Share on other sites More sharing options...
XF Falcon <put funny sh*t here> Member 3,365 Member For: 18y 5m 11d Gender: Male Location: Perth, NOR Posted 04/08/07 05:56 PM Share Posted 04/08/07 05:56 PM (edited) I know its a bit of a thread mine... BUT I cannot for the life of me undo the two hoses going in/out of the fuel filter!!!Ive put a spanner on the filter and the smaller one on the fuel line and turn in the right directions and it wont budge at all !! I put some WD40 on there so hopefully its worked its magic a bit overnight and softened things up a little bit. VERY ANNOYING as I want to see how clogged up the filter is, and put on the new one :(Any tips? (yes I did eat my weetbix this morning Edited 04/08/07 05:59 PM by XF Falcon Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-561228 Share on other sites More sharing options...
BF_Turbo Member 236 Member For: 17y 11m 7d Gender: Male Location: Central QLD Posted 04/08/07 10:26 PM Share Posted 04/08/07 10:26 PM Well I know when popeye has this problem a tin of spinnach is the go..Otherwise sorry mate outta ideas? should be relatively easy to undo. Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-561232 Share on other sites More sharing options...
Dagabond Bored Member Administrator 35,722 Member For: 22y 5m 5d Gender: Male Location: Dé·jà vu Posted 05/08/07 01:11 AM Share Posted 05/08/07 01:11 AM Use an oxy torch and warm it up a little bit...... Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-561264 Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 11m 24d Gender: Male Location: Victoria Posted 05/08/07 01:24 AM Share Posted 05/08/07 01:24 AM This is actually quite common...The nuts on the fuel filters can be impossible to undo sometimes. Try 2 flare nut spanners that are good quality. I actually know of cases where the line had to cut and hose and clamps put in place. Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-561269 Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 11m 25d Gender: Male Location: Brisbane Posted 05/08/07 01:26 AM Share Posted 05/08/07 01:26 AM Use an oxy torch and warm it up a little bit...... Make sure you get pics though! Link to comment https://www.fordxr6turbo.com/forum/topic/27295-replacing-fuel-filter/#findComment-561270 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now