F6 RAPID Formerly Turbo6 Donating Members 2,332 Member For: 21y 11m 21d Location: North Brisbane Posted 21/07/06 01:37 AM Share Posted 21/07/06 01:37 AM Good stuff mate.Just FYI, I have the same size wheels and have 245/30-20's on the front and 275/35-20's on the rear. The rears equate to about 3% overdriven now so it is a little taller geared and the speedo is a little out - just have to remember that when driving. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 3m 7d Gender: Male Location: Perth, WA Posted 21/07/06 01:57 AM Share Posted 21/07/06 01:57 AM (edited) Mate can you post some better pics?? 20's cost $225 to get sent over to Perth, phark that hahaha. For anyone who cares the 19's are $1999 + freight. I'll shoot them an email for more info Chopper (black/silver)Chopper (chrome)Apache (shadow chrome) 19x8 Edited 21/07/06 02:07 AM by XtRmn8 Link to comment Share on other sites More sharing options...
GlennAUII Former XT pilot Lifetime Members 4,791 Member For: 21y 5m 6d Gender: Male Location: The Womb Posted 21/07/06 10:26 AM Share Posted 21/07/06 10:26 AM effin fat.. I love em! now go get a side on pic of the car hehe.. Link to comment Share on other sites More sharing options...
mickey_gee Member 593 Member For: 20y 2m 14d Gender: Male Location: Newcastle NSW Posted 21/07/06 11:07 AM Share Posted 21/07/06 11:07 AM my new 20's, picked em up today.Pics taken now in the garag as it is phissng down outside, So I will post some better pics tomorrow taken from a distance and in daylight.20x8.5 fronts 225/35/20 same width as 235 17's20x9.5 rears 245/35/20 same width as a 255 17What do you think???????←They look nice.I take it you got nangcrap rubber?As for tyre width.You should have put 245 on the 8.5's and 265 on the 9.5'sYour current tyre width are for rims of 7 - 7.5inch (front) and 8 - 8.5 inch (rear)Dont corner to hard as you will most likely chew up the side of your rim.. lol←Ive been using Nangcraps for a while and I seem to chew them up on the ontsice and inside edges. Is this pretty normal for them? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 6d Gender: Male Location: Perth Posted 21/07/06 11:23 AM Share Posted 21/07/06 11:23 AM If your chewing out the outside and inside edges it sounds like that maybe a bit low on pressure...? what pressure are you running..? Link to comment Share on other sites More sharing options...
mickey_gee Member 593 Member For: 20y 2m 14d Gender: Male Location: Newcastle NSW Posted 21/07/06 12:00 PM Share Posted 21/07/06 12:00 PM If your chewing out the outside and inside edges it sounds like that maybe a bit low on pressure...? what pressure are you running..?←I was running about 36psi. Knowing that these symptoms are caused from low pressure I now run 44psi. It is very rough and I will probably buy different tyres next time. Im looking at firestone tyres and not sure if they are any good. I like the 20s though. They look the $hit! Link to comment Share on other sites More sharing options...
stedz101 Member 75 Member For: 20y 2m 25d Posted 21/07/06 12:46 PM Author Share Posted 21/07/06 12:46 PM (edited) Good stuff mate.Just FYI, I have the same size wheels and have 245/30-20's on the front and 275/35-20's on the rear. The rears equate to about 3% overdriven now so it is a little taller geared and the speedo is a little out - just have to remember that when driving. ←that's exactly what im putting on next tyre change, just one question,how do you clear the top bolt with 245's up front(Will be trying the rears on the front for clearence tomorrow)These rims are 40p offset so that helps a little too I guessone problem with these is that the hub nut cover sticks out a bit on the fronts making it impossible to put the centre cap on. May have to fit a spacer and modify the the hub nut cap a little Edited 21/07/06 12:59 PM by stedz101 Link to comment Share on other sites More sharing options...
XR6IXT Donating Members 662 Member For: 19y 4m 7d Gender: Male Location: Adelaide Posted 21/07/06 06:17 PM Share Posted 21/07/06 06:17 PM Where are the pics I wanna see more Link to comment Share on other sites More sharing options...
stedz101 Member 75 Member For: 20y 2m 25d Posted 22/07/06 12:01 PM Author Share Posted 22/07/06 12:01 PM ok ok here they are, I fixed the centre cap problem today.Solution: Remove the hub nut dust cap and run a super fine bead of silastic on the back edge of the centre cap and snap into place(silastic is to seal out dust)I put some plastacine on the hub bolt when test fitting cap for clearence and found there was 2mm gap (chearing)The only problem with the silastic is you have to redo it everytime you balance your rimsItwas raining today sothe car and wheels are dirty(typical black paint)And yes I know it badly needs some brakes!!!!! Link to comment Share on other sites More sharing options...
INPURSUIT Fastest Taxi In Melbourne Donating Members 701 Member For: 18y 9m 19d Gender: Male Location: Melbourne Posted 22/07/06 02:56 PM Share Posted 22/07/06 02:56 PM very nice mate what wheels were they again? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now