jEtONiT Donating Members 1,817 Member For: 21y 1m 18d Gender: Not Telling Location: next door.. Posted 16/07/06 06:25 AM Share Posted 16/07/06 06:25 AM Hi all,Just wondering about the new 6 speed auto. How does it hold up against a modified engine with big torque numbers? Has anybody with this tranny modded their car and have they had any problems? Is there any transmission people who can strengthen them should the need arise?Out of interest, does anybody know how much torque they are capable of handling (according to factory specs)?Thanks.... Link to comment Share on other sites More sharing options...
SHOCK Team Grandpa Donating Members 1,921 Member For: 18y 7m 25d Gender: Male Location: Hunter Valley Posted 16/07/06 06:29 AM Share Posted 16/07/06 06:29 AM hopefully about 240rwkw...not sure jEt Link to comment Share on other sites More sharing options...
Romulus Donating Members 1,279 Member For: 19y 11m 21d Location: Perth Posted 16/07/06 08:30 AM Share Posted 16/07/06 08:30 AM (edited) hopefully about 240rwkw...not sure jEt←Don't you mean 420rwkw?I know of one BF ZF auto with over 330rwkw that's hanging on ok.I'd say any failures of the trans will more likely appear in the heavier Territory Turbo than the Falcon/FPV's. Edited 16/07/06 08:31 AM by M6 XR6T Link to comment Share on other sites More sharing options...
SHOCK Team Grandpa Donating Members 1,921 Member For: 18y 7m 25d Gender: Male Location: Hunter Valley Posted 16/07/06 08:34 AM Share Posted 16/07/06 08:34 AM hopefully about 240rwkw...not sure jEt←Don't you mean 420rwkw?I know of one BF ZF auto with over 330rwkw that's hanging on ok.I'd say any failures of the trans will more likely appear in the heavier Territory Turbo than the Falcon/FPV's.←Sounds good to me M6.... Link to comment Share on other sites More sharing options...
Venom XR6 Member 1,460 Member For: 21y 7m 29d Location: Geelong Victoria Posted 16/07/06 10:03 AM Share Posted 16/07/06 10:03 AM Hi all,Just wondering about the new 6 speed auto. How does it hold up against a modified engine with big torque numbers? Has anybody with this tranny modded their car and have they had any problems? Is there any transmission people who can strengthen them should the need arise?Out of interest, does anybody know how much torque they are capable of handling (according to factory specs)?Thanks....←They have a 600nm rating from the factory. Meaning they are designed to handle that much torque over the useful life of the car, which I think is considered 200,000km. There are versions rated to 850nm in V12 BMW's and Audi's. I think they will handle big torque pretty well as I've yet to hear of one breaking in boosted turbos. Link to comment Share on other sites More sharing options...
JimmyXR6T04 Member 1,299 Member For: 19y 6m 5d Location: Canberra Posted 16/07/06 10:17 AM Share Posted 16/07/06 10:17 AM can't wait to see how these cope with one of Extremes low down boost monster tunes in it.. as it'll greatly affect my influence to upgrade to a Bf auto phoon or put a T56 in my current car. Link to comment Share on other sites More sharing options...
F6 UTE - Track Bound EVO III - Member 3,367 Member For: 20y 9d Gender: Male Location: Strapped in and holding on Posted 17/07/06 05:31 AM Share Posted 17/07/06 05:31 AM I've heard of 2 that have blown the flex plate in the last 2 weeks. Both modified. .. Link to comment Share on other sites More sharing options...
SavageF6 Donating Members 1,622 Member For: 20y 8m 6d Gender: Male Location: Sydney Posted 17/07/06 06:04 AM Share Posted 17/07/06 06:04 AM I read that these things were a closed box, which case they can't be modded internally. Is that true? What's the go?? Link to comment Share on other sites More sharing options...
Chooka THE Member Donating Members 1,210 Member For: 19y 5m 20d Gender: Male Location: Melbourne Posted 17/07/06 06:07 AM Share Posted 17/07/06 06:07 AM I read that these things were a closed box, which case they can't be modded internally. Is that true? What's the go??←Someone put it together so it must come appart, just a matter of time Chooka Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 2d Gender: Male Location: Perth Posted 17/07/06 06:13 AM Share Posted 17/07/06 06:13 AM I've heard of 2 that have blown the flex plate in the last 2 weeks. Both modified. ..←One of those was modded one was stock...the flex plates didnt stayas tight as they needed to be from the factory.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now