Headsex Donating Members 2,528 Member For: 19y 8m 22d Gender: Male Location: Melb Posted 09/07/06 03:41 AM Share Posted 09/07/06 03:41 AM HI Guys,Got myself a pair of cobolt guages, oil presure and boost..I went back to autobarn to get the t - piece for the oil presure so I can fit the oil sender whilst retaining my existing oil presure/switch.What they said they sell is the Oil Filter sandwitch plate..I told them I will pass.. even the guy helping me out said he was looking for a normal T-Piece by the part number the autometer guage guy said I needed..Realistically, This will work. But not my cup of tea..They have a whole bunch of T-Pieces. But as no body knew what type of thread the BA oil sensor had, conversation ended there.. Sure, I could pull the existing unit out, and get them too match it. but that's too hard Does anyone know what thread the existing oil sender unit is?thanksDanny. Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/ Share on other sites More sharing options...
Robit28 Member 385 Member For: 19y 6m 2d Location: Brisbane Posted 09/07/06 04:09 AM Share Posted 09/07/06 04:09 AM Just match it to the Autometer thread, I'm pretty sure all three are the same (engine block male, oil pressure sender female and original oil switch female).Go the T peice, much better than a sandwich plate in my opinion. Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-404074 Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 8m 22d Gender: Male Location: Melb Posted 09/07/06 05:44 AM Author Share Posted 09/07/06 05:44 AM Just match it to the Autometer thread, I'm pretty sure all three are the same (engine block male, oil pressure sender female and original oil switch female).Go the T peice, much better than a sandwich plate in my opinion.←Yes.. What IS the thread... I can pull it out, but I prefer not to unless it was to put the t piece in..danny. Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-404098 Share on other sites More sharing options...
Decoy Member 163 Member For: 19y 2m 19d Gender: Male Location: Brissy Posted 09/07/06 05:49 AM Share Posted 09/07/06 05:49 AM I bought a T-piece from Repco, VDO 230.032, I THINK it is 1/4"NPT for the original pressure sender and the Autometer was 1/8". I got that part number from a thread on here by ZAP F6 (thanks ) and it fitted no worries. Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-404100 Share on other sites More sharing options...
Dannopower Donating Members 421 Member For: 19y 10m 26d Gender: Male Location: Canberra ACT Posted 09/07/06 05:50 AM Share Posted 09/07/06 05:50 AM exactly, that's what I got too and it fitted straight in! Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-404101 Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 8m 22d Gender: Male Location: Melb Posted 09/07/06 09:16 AM Author Share Posted 09/07/06 09:16 AM I bought a T-piece from Repco, VDO 230.032, I THINK it is 1/4"NPT for the original pressure sender and the Autometer was 1/8". I got that part number from a thread on here by ZAP F6 (thanks ) and it fitted no worries.←Sweet, just what I need. confirmation it was 1/4 NPT I was 80% sure. I didnt paste it here just to be sure..Well now that I have a part number, I can finish the installation off..I did try a search, but I found nothing :/Thanks guysDanny. Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-404176 Share on other sites More sharing options...
XR68UZ XR68UZ Donating Members 732 Member For: 19y 3m 23d Location: Sydney Posted 13/08/06 05:34 AM Share Posted 13/08/06 05:34 AM can this thing be used for mechanical gauges as well? I have all the electrics hooked up for my oil pressure gauge but I havent hooked up the sender.is the t-piece the only thing that I need? Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-420673 Share on other sites More sharing options...
Headsex Donating Members 2,528 Member For: 19y 8m 22d Gender: Male Location: Melb Posted 13/08/06 05:48 AM Author Share Posted 13/08/06 05:48 AM can this thing be used for mechanical gauges as well? I have all the electrics hooked up for my oil pressure gauge but I havent hooked up the sender.is the t-piece the only thing that I need?←If the oil presure fitting is 1/8th NTP male thread. then yes.. Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-420679 Share on other sites More sharing options...
XR68UZ XR68UZ Donating Members 732 Member For: 19y 3m 23d Location: Sydney Posted 13/08/06 05:56 AM Share Posted 13/08/06 05:56 AM what does that mean? ive bought the mechanical cobalt oil pressure gauge. and all I have to hook it up is what was inside the box. Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-420682 Share on other sites More sharing options...
XR68UZ XR68UZ Donating Members 732 Member For: 19y 3m 23d Location: Sydney Posted 13/08/06 05:57 AM Share Posted 13/08/06 05:57 AM I also dont know what a sender is but I used it anyway. is it just like hooking up the mechanical boost gauge? but to the stock oil pressure sensor thing Link to comment https://www.fordxr6turbo.com/forum/topic/26697-autometer-oil-presure-guage/#findComment-420683 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now