Duc21 Member 110 Member For: 19y 1m 22d Gender: Male Location: Brisbane Posted 22/06/06 09:37 AM Share Posted 22/06/06 09:37 AM (edited) Hi guysWas wondering if a stock XR6T or XR8 exhaust cat back would fit onto a N/A XR. And if so is there any performance gains to be had or is it just a waste of time???Thanks for your input people.CheersSteve Edited 22/06/06 09:38 AM by Duc21 Link to comment Share on other sites More sharing options...
Duc21 Member 110 Member For: 19y 1m 22d Gender: Male Location: Brisbane Posted 22/06/06 10:14 AM Author Share Posted 22/06/06 10:14 AM any idea people??? Link to comment Share on other sites More sharing options...
boosted_sa Member 270 Member For: 19y 6m 20d Posted 22/06/06 11:19 AM Share Posted 22/06/06 11:19 AM It will fit you just have to get an adapter made at an exhaust shop, as the Turbo & XR8 exhaust is twin 2 1/4". there should be a power increase, dont know how much. You'd be better off gettin a set of extractors aswell. Link to comment Share on other sites More sharing options...
Fat-Tony Member 5,364 Member For: 18y 10m 18d Posted 22/06/06 12:21 PM Share Posted 22/06/06 12:21 PM im not so sure that a N/A 4 litre 6 cyl would require an exhaust that big, you might be trading of some low end torque for high end power aswell Link to comment Share on other sites More sharing options...
G6ET8U Playing with Sports Bikes... Silver Donating Members 1,927 Member For: 19y 3m 10d Gender: Male Location: Whistling, GTX. Posted 22/06/06 12:41 PM Share Posted 22/06/06 12:41 PM Hey duc...If you have a look over at Ford Forums there is quite a few boys and girls over there with N/A BA's and from what I have read they use them to pretty good effect... from memory (and I could be wrong) but it's good for about 5-10rwkw... which is better than nothing...Jack Link to comment Share on other sites More sharing options...
camerooch Member 129 Member For: 21y 8m 17d Location: Melbourne Posted 23/06/06 12:03 AM Share Posted 23/06/06 12:03 AM I did quite a few of them when I was working at a Ford dealership.Left overs from fitting Herrods products !!Before and after dyno readings showed we picked up about 10 rwkw.If you can, I would recommend keeping the factory tip on the XR system.We did a couple with 2 small dump pipes fitted behind the bumper and it tended to "Bark" a fair bit.Average cost to have Midas do a mod to the front flange to make it fit was about $80.Hope this helps you out !! Link to comment Share on other sites More sharing options...
Gman2608 Member 4 Member For: 18y 7m 21d Posted 05/07/06 11:05 PM Share Posted 05/07/06 11:05 PM Would $500 be a good price for a second hand full xr6t exhaust of a car with 5000kms on it? Link to comment Share on other sites More sharing options...
Fat-Tony Member 5,364 Member For: 18y 10m 18d Posted 06/07/06 12:20 AM Share Posted 06/07/06 12:20 AM Would $500 be a good price for a second hand full xr6t exhaust of a car with 5000kms on it?←ive seen them go cheaper than that, ive recently seen on ebay one for 80 dollars, one for 200, and I know some1 who has one that would be wanting to sell. is your car a sedan or a ute? Link to comment Share on other sites More sharing options...
Gman2608 Member 4 Member For: 18y 7m 21d Posted 06/07/06 01:46 AM Share Posted 06/07/06 01:46 AM Would $500 be a good price for a second hand full xr6t exhaust of a car with 5000kms on it?←ive seen them go cheaper than that, ive recently seen on ebay one for 80 dollars, one for 200, and I know some1 who has one that would be wanting to sell. is your car a sedan or a ute?←My car is a sedan, although it already has a twin pipes from the back of the main muffler. Link to comment Share on other sites More sharing options...
Duc21 Member 110 Member For: 19y 1m 22d Gender: Male Location: Brisbane Posted 09/07/06 01:20 AM Author Share Posted 09/07/06 01:20 AM I picked one up with 2500klms on it for $100, so im thinkin $500 is a little on the steep side..... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now