my2010turbo Member 14 Member For: 12y 7m 22d Posted 11/02/13 08:09 PM Share Posted 11/02/13 08:09 PM I have installed a turbo smart dual kompact 25mm to a fg xr6t and running 17psi but the car seems like wants to stall coming to a stop or even starting up, any idea why, cheers Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 13d Gender: Male Location: Far north queensland Posted 11/02/13 08:19 PM Share Posted 11/02/13 08:19 PM if it is adjustable then tighten it up fully Link to comment Share on other sites More sharing options...
my2010turbo Member 14 Member For: 12y 7m 22d Posted 11/02/13 08:35 PM Share Posted 11/02/13 08:35 PM I think I have to use the washers, Link to comment Share on other sites More sharing options...
SecaBoy Donating Members 203 Member For: 15y 9m 5d Posted 12/02/13 01:56 AM Share Posted 12/02/13 01:56 AM the valve on mine would stay open on idle. I had to use a few washers in it to keep it shut. Link to comment Share on other sites More sharing options...
fgxr6t89 Member 16 Member For: 12y 2m 6d Gender: Male Location: Melbourne, South East. Posted 05/09/13 11:30 PM Share Posted 05/09/13 11:30 PM I have recently installed a turbosmart kompact dual port blow off valve on my car.I have made it full atmospheric. My car is running 20 PSI. I have two questions:1. Under lower boost levels eg < 8 PSI, I will get the turbo surge/flutter sound, anything above that will get the bov sound. Is this normal or should I adjust? If so tighter or more loose? currently have 4 shims.2. Also wanting to know, is it possible for the bov to leak of make the car lose power? And if so, would this be caused by the BOV being adjusted too tightly or too lose? Link to comment Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 14y 9m 21d Gender: Male Location: Christchurch, New Zealand Posted 06/09/13 05:17 AM Share Posted 06/09/13 05:17 AM If you have it too loose I pretty sure it will open under boost and bleed off some of that pressure. Of course this would probably show up on a boost gauge if fitted.As long as your not losing boost then you could loosen it a bit, but whats happening now isn't really an issue. Link to comment Share on other sites More sharing options...
Doddo22 Member 135 Member For: 11y 8m 12d Gender: Male Location: Newcastle Posted 06/09/13 06:08 AM Share Posted 06/09/13 06:08 AM if you lose boost how do u know if its BOV or valve springs? Link to comment Share on other sites More sharing options...
fgxr6t89 Member 16 Member For: 12y 2m 6d Gender: Male Location: Melbourne, South East. Posted 06/09/13 08:18 AM Share Posted 06/09/13 08:18 AM if you lose boost how do u know if its BOV or valve springs?Just wanting to know if it is possible.If you have it too loose I pretty sure it will open under boost and bleed off some of that pressure. Of course this would probably show up on a boost gauge if fitted.As long as your not losing boost then you could loosen it a bit, but whats happening now isn't really an issue.I do have a boost gauge connected. I never would have thought it would be this hard to adjust a bov. Just about ready to throw it in the bin.As per the instructions, I've adjusted it so that the piston is not open during idle.Is this the correct way to adjust them or is it OK if they are open on idle. Link to comment Share on other sites More sharing options...
Doddo22 Member 135 Member For: 11y 8m 12d Gender: Male Location: Newcastle Posted 06/09/13 12:37 PM Share Posted 06/09/13 12:37 PM If your gonna throw it in the bin give it to me Link to comment Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 14y 9m 21d Gender: Male Location: Christchurch, New Zealand Posted 07/09/13 02:52 AM Share Posted 07/09/13 02:52 AM If valve springs you'd have other running issues, like rough running after boost.As the instructions say closed for idle, otherwise your already leaking air out straight away before even on boost.As said though, if too loose you'll have it leak out when accelerating. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now