strettan Member 36 Member For: 15y 6m 22d Gender: Male Location: Perth, WA Posted 29/03/11 03:12 AM Share Posted 29/03/11 03:12 AM I got a turbosmart kompact.... fitted it to my FG and lets of a PSHHHHHHHH sound. the sound says, I got something under my bonnet, but its not too loud to say im a try hard. probably the best way you could have it. however if you are running some serious PSI and have a serious engine.... I reckon you would want some serious doessssss. Link to comment Share on other sites More sharing options...
xr6turbosam Member 31 Member For: 14y 7m 19d Gender: Male Posted 21/04/11 11:31 AM Share Posted 21/04/11 11:31 AM I got a turbosmart kompact.... fitted it to my FG and lets of a PSHHHHHHHH sound. the sound says, I got something under my bonnet, but its not too loud to say im a try hard. probably the best way you could have it. however if you are running some serious PSI and have a serious engine.... I reckon you would want some serious doessssss.Hi does anyone have a pic?I have a kompact plumbback fully vented and its not loud at all!I have posted a bad photo hopefully I have it right! Link to comment Share on other sites More sharing options...
xr6turbosam Member 31 Member For: 14y 7m 19d Gender: Male Posted 21/04/11 11:59 AM Share Posted 21/04/11 11:59 AM Hi does anyone have a pic?I have a kompact plumbback fully vented and its not loud at all!I have posted a bad photo hopefully I have it right!photo facing the right way! Link to comment Share on other sites More sharing options...
falcon04 Member 20 Member For: 13y 10m 18d Posted 04/05/11 09:38 AM Share Posted 04/05/11 09:38 AM Hi just bought one of these dual port kompacts from the states fro like 190AUS to my door, DOES IS SOUND BEST FULLY ATMO LIKE BLOCKED BY THE PLATE OR SHOULD I LET IT GO 50/50??? WHAT DO PEOPLE THINK SOUNDS BEST, AND WILL IT HURT THE CAR IF I FULLY ATMO AND BLOCK THE PIPE OFF????CHEERS Link to comment Share on other sites More sharing options...
tattooz84 Member 5 Member For: 13y 3m 2d Posted 01/10/11 07:10 AM Share Posted 01/10/11 07:10 AM hi just fitted one of the dual port compact series to my fg and I find the port doesn't fully close at idle does this mean I need to install some of the supplied washers? Link to comment Share on other sites More sharing options...
steve_xr6t New Member 1 Member For: 13y 3m 11d Posted 10/10/11 12:24 PM Share Posted 10/10/11 12:24 PM hi just fitted one of the dual port compact series to my fg and I find the port doesn't fully close at idle does this mean I need to install some of the supplied washers?Hi. Yes you can either put some washers in there or buy the pink spring. Having a read at some of these posts with the flutter then wossh sound. It seems to me they are put on the wrong way around. The above pic of the fg is put on wrong. Replace the trumpet onto the other side and the vented port where the trumpet was. Then install it with the trumpet facing outwards. You will then notice no more flutter and woosh sound following. Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 6m 3d Gender: Male Location: Melbourne Posted 11/10/11 05:47 AM Share Posted 11/10/11 05:47 AM Yeah ya right it is around the wrong way. Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,427 Member For: 14y 11m 4d Gender: Male Location: Melbourne Posted 11/10/11 08:37 AM Share Posted 11/10/11 08:37 AM what the hell did you use to take that photo my god!!!!!!! Link to comment Share on other sites More sharing options...
tattooz84 Member 5 Member For: 13y 3m 2d Posted 11/10/11 09:27 AM Share Posted 11/10/11 09:27 AM Uploaded with ImageShack.uslooked at the spring noticed it had the dab of pink paint on it but fitted 4x washers to get it to seat correctly at idle plenty of spring tension now its great have it set about one turn out from fully closed and sounds great... Link to comment Share on other sites More sharing options...
Meadey82 Member 3 Member For: 13y 27d Posted 29/11/11 09:38 PM Share Posted 29/11/11 09:38 PM Hi, I recently installed a Kompact Dual Port on a 2003 XR6 Turbo. On idle the piston was staying 3-4 mm open on the hardest setting, so I inserted 3 shims supplied with the BOV. It’s an automatic and on the hardest setting releasing the accelerator around 2000rpm it releases making a quiet tu-tu-tuuu sound. Not a whoosh. Is this the correct sound it should make? Also what rev range should it make noise at? 3000 rpm and higher it makes the same sound and is much louder. The vacuum line is not hose clamped, and I cut the factory vacuum line in half as it was way too long to mount comfortable.Any help is appreciated as I am inexperienced with BOV’s and cannot find consistent info elsewhere.Cheers. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now