Jump to content

Recommended Posts

  • ASHA - Anti Stooge Hunter Association
  • Member
  • Member For: 22y 11d
  • Location: Sydney Bronx :)

Hi Chooka, Yes, the system does come with the Cat.

Jordak, all I know about the cats is that they are Hi flow metalic substraight, one a 3" the other a 3.5". I do not have specs on flow rates etc.

  • Replies 106
  • Created
  • Last Reply

Top Posters In This Topic

  • THE Member
  • Donating Members
  • Member For: 19y 11m 17d
  • Gender: Male
  • Location: Melbourne
  XR6ISM said:
Hi Chooka, Yes, the system does come with the Cat.

Jordak, all I know about the cats is that they are Hi flow metalic substraight, one a 3" the other a 3.5". I do not have specs on flow rates etc.

Thanks, XR6ISM

If that's the case it's a fantastic buy!!!

Chooka

  • ASHA - Anti Stooge Hunter Association
  • Member
  • Member For: 22y 11d
  • Location: Sydney Bronx :)
  Chooka said:
  XR6ISM said:
Hi Chooka, Yes, the system does come with the Cat.

Jordak, all I know about the cats is that they are Hi flow metalic substraight, one a 3" the other a 3.5". I do not have specs on flow rates etc.

Thanks, XR6ISM

If that's the case it's a fantastic buy!!!

Chooka

It is and you will get a power increase also. When these systems were tested on my car by Bestmufflers (who then send them on to Xforce to start production of the kits), my car gained 14rwkw when standard with the 3" system. The only draw back is that this system will not run more then 270rwkw.

The 3.5" system has no problems with holding 300+ rwkw.

  • ASHA - Anti Stooge Hunter Association
  • Member
  • Member For: 22y 11d
  • Location: Sydney Bronx :)
  ford number 1 said:
I know of a car with the 3inch xforce system and its running 290rwkw..

I guess it depends on who's dyno and how it was tuned.

With the 3" test system on Spiro's dyno the car made 270rwkw before Spiro said I need a bigger exhaust system. At this stage Chris (from Best mufflers) made up the 3.5" system which when put on the dyno jumped straight to 290. With some extra tuning we left it on 303rwkw.

You can find out info on:

http://www.bestmufflers.com/Information/Cu...yno_Results.htm

Regz

Dean

  • ASHA - Anti Stooge Hunter Association
  • Member
  • Member For: 22y 11d
  • Location: Sydney Bronx :)
  ford number 1 said:
it was tuned by spiro on his dyno

This is interesting, cause Spiro managed 270 from mine before I needed the system changed.

Good to know that its capable of more, thanks for that info mate.

  XR6ISM said:
  ford number 1 said:
it was tuned by spiro on his dyno

This is interesting, cause Spiro managed 270 from mine before I needed the system changed.

Good to know that its capable of more, thanks for that info mate.

the 3" xforce with cat replacement has seen 400rwkw and better everyday driveability

the 3.5 when available with the twin dump and metal cat not the current normal cat made to look like a metal cat will be awsome!!!!

  • ASHA - Anti Stooge Hunter Association
  • Member
  • Member For: 22y 11d
  • Location: Sydney Bronx :)
  Dynowog said:
  XR6ISM said:
  ford number 1 said:
it was tuned by spiro on his dyno

This is interesting, cause Spiro managed 270 from mine before I needed the system changed.

Good to know that its capable of more, thanks for that info mate.

the 3" xforce with cat replacement has seen 400rwkw and better everyday driveability

the 3.5 when available with the twin dump and metal cat not the current normal cat made to look like a metal cat will be awsome!!!!

DW.....even though Xforce may make the split pipe used in my car, we have scrapped the split pipe for the 4" pipe that's currently on the car.

Spiro has confirmed it has had a positive effect on the car when it was last tuned and there was a power gain.

Regz

Dean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'