Jump to content

Dyno / 1/4 Mile Comparisons


geea

Recommended Posts

  • Member
  • Member For: 21y 6m 17d
  • Location: sydney
2003 auto XR6T with airbox mod

183rwkw

13.64 @ 100mph WSID

optimax, factory dunlops with 25PSI

complete with spare tyre & double pram in the boot !

that is an awesome effort mate!!

what was your 60 foot?

191rwkw - BA XR6T 2005 MKII - 6 speed manual

14.01@101.6mph (I think).. ill dig up the timeslip.

that's strange..

my mph is the same, et slightly quicker, but my dyno sheet says 297hp atw!!

my dyno sheet cant be right hey..

with ~220rwkw I should be around 104-105 mph right??

60' time was 2.0

Link to comment
Share on other sites

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Member
  • Member For: 19y 9m
  • Gender: Male
  • Location: Melbourne
60' time was 2.0

I think you will find your run the machine wasnt calibrated right.

Just the other week a magna (stock) ran a 13.8

Have you run back to back runs around this time? or was it a once off?

Edited by Bain
Link to comment
Share on other sites

  • Team Grandpa
  • Donating Members
  • Member For: 18y 6m 29d
  • Gender: Male
  • Location: Hunter Valley
which sheet ? the DYNO or the time slip.

Either way I can post both. The DYNO sheet is at home so I will post it tomorrow

Cheers

PSI

Great time

Just seems like a too good of a time for 183KW

I have 196 in my stock ute and I'm just hoping to get 14.3 from my 6 speed auto.

cheers

Link to comment
Share on other sites

  • loitering with intent
  • Lifetime Members
  • Member For: 21y 3m 9d
  • Gender: Male
  • Location: Zombie Birdhouse
60' time was 2.0

Have you run back to back runs around this time? or was it a once off?

It was a while ago now , but Matt also ran a number of 13.8s from memory and on different dates

Link to comment
Share on other sites

  • Team Grandpa
  • Donating Members
  • Member For: 18y 6m 29d
  • Gender: Male
  • Location: Hunter Valley
60' time was 2.0

Have you run back to back runs around this time? or was it a once off?

It was a while ago now , but Matt also ran a number of 13.8s from memory and on different dates

Not doubting the time, I dont think the dyno is correct. You have way more than 183kw, what do you think....

Link to comment
Share on other sites

  • Member
  • Member For: 21y 6m 17d
  • Location: sydney

the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

The dyno run was done at Autotech by Spiro. who stated that bit was about average for an auto.

Link to comment
Share on other sites

  • Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car
  • Member
  • Member For: 21y 5m 6d
  • Location: D SHIRE!
the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

Low boost performance setting the std yet again :spit::spit:

Link to comment
Share on other sites

  • Team Grandpa
  • Donating Members
  • Member For: 18y 6m 29d
  • Gender: Male
  • Location: Hunter Valley
the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

The dyno run was done at Autotech by Spiro. who stated that bit was about average for an auto.

What mods do you have? You have standard boost(no edit I take it)standard exhaust.....was it on street tyres, what fuel? These are great times for 183kw :spit:

Link to comment
Share on other sites

  • Member
  • Member For: 21y 6m 17d
  • Location: sydney
the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

The dyno run was done at Autotech by Spiro. who stated that bit was about average for an auto.

What mods do you have? You have standard boost(no edit I take it)standard exhaust.....was it on street tyres, what fuel? These are great times for 183kw :spit:

Mods I had... the big blue girl has gone but the memories live on

XR8 snorkel on the std T airbox, 1/2 tank optimax fuel, SP3000 dunlops & 5deg ambient !

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'