Jump to content

Recommended Posts

  • Member
  • Member For: 22y 13d
  • Location: sydney
  XR06T said:
  P.S.I said:
2003 auto XR6T with airbox mod

183rwkw

13.64 @ 100mph WSID

optimax, factory dunlops with 25PSI

complete with spare tyre & double pram in the boot !

that is an awesome effort mate!!

what was your 60 foot?

  Bain said:
191rwkw - BA XR6T 2005 MKII - 6 speed manual

14.01@101.6mph (I think).. ill dig up the timeslip.

that's strange..

my mph is the same, et slightly quicker, but my dyno sheet says 297hp atw!!

my dyno sheet cant be right hey..

with ~220rwkw I should be around 104-105 mph right??

60' time was 2.0

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • Member
  • Member For: 20y 2m 26d
  • Gender: Male
  • Location: Melbourne
  P.S.I said:
60' time was 2.0

I think you will find your run the machine wasnt calibrated right.

Just the other week a magna (stock) ran a 13.8

Have you run back to back runs around this time? or was it a once off?

Edited by Bain
  • Team Grandpa
  • Donating Members
  • Member For: 19y 24d
  • Gender: Male
  • Location: Hunter Valley
  P.S.I said:
which sheet ? the DYNO or the time slip.

Either way I can post both. The DYNO sheet is at home so I will post it tomorrow

Cheers

PSI

Great time

Just seems like a too good of a time for 183KW

I have 196 in my stock ute and I'm just hoping to get 14.3 from my 6 speed auto.

cheers

  • loitering with intent
  • Lifetime Members
  • Member For: 21y 9m 5d
  • Gender: Male
  • Location: Zombie Birdhouse
  Bain said:
  P.S.I said:
60' time was 2.0

Have you run back to back runs around this time? or was it a once off?

It was a while ago now , but Matt also ran a number of 13.8s from memory and on different dates

  • Team Grandpa
  • Donating Members
  • Member For: 19y 24d
  • Gender: Male
  • Location: Hunter Valley
  Buf-Phoon said:
  Bain said:
  P.S.I said:
60' time was 2.0

Have you run back to back runs around this time? or was it a once off?

It was a while ago now , but Matt also ran a number of 13.8s from memory and on different dates

Not doubting the time, I dont think the dyno is correct. You have way more than 183kw, what do you think....

  • Member
  • Member For: 22y 13d
  • Location: sydney

the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

The dyno run was done at Autotech by Spiro. who stated that bit was about average for an auto.

  • Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car
  • Member
  • Member For: 21y 11m 2d
  • Location: D SHIRE!
  P.S.I said:
the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

Low boost performance setting the std yet again :spit::spit:

  • Team Grandpa
  • Donating Members
  • Member For: 19y 24d
  • Gender: Male
  • Location: Hunter Valley
  P.S.I said:
the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

The dyno run was done at Autotech by Spiro. who stated that bit was about average for an auto.

What mods do you have? You have standard boost(no edit I take it)standard exhaust.....was it on street tyres, what fuel? These are great times for 183kw :spit:

  • Member
  • Member For: 22y 13d
  • Location: sydney
  SHOCKXR6T said:
  P.S.I said:
the car ran consistent 13.8`s and the night I ran 13.64, the runs either side of it were 13.66 & 13.68.

The dyno run was done at Autotech by Spiro. who stated that bit was about average for an auto.

What mods do you have? You have standard boost(no edit I take it)standard exhaust.....was it on street tyres, what fuel? These are great times for 183kw :spit:

Mods I had... the big blue girl has gone but the memories live on

XR8 snorkel on the std T airbox, 1/2 tank optimax fuel, SP3000 dunlops & 5deg ambient !

  • Faster than any BTA,XTC,Autotech, Nizpro and Tunehouse car
  • Member
  • Member For: 21y 11m 2d
  • Location: D SHIRE!

Noooooooooooooooooooooo!!!! :spit:

What are you driving now Matt?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'